Properties associated with the Wire control

WINDEV, WEBDEV AND WINDEV MOBILE
ONLINE HELP

Version:

Home | Sign in | English

Help

Editors

Controls (window/page/report)

Controls

Wire control

Properties associated with the Wire control

Overview

Properties available in a window

See also

The Wire control

Properties associated with the Wire control

Overview

A Wire control can be handled in a window by the following WLanguage properties.

Properties available in a window

The following properties are associated with the Wire controls:


Versions 09 and later DisplayEnabled New in version 09 DisplayEnabled DisplayEnabled	..DisplayEnabled is used to: find out whether the display of a control or window is enabled or not. If the display is enabled, the content of the control is refreshed on a regular basis. enable (or not) the display of a control or window.
Versions 09 and later ZOrder New in version 09 ZOrder ZOrder	..ZOrder is used to manage the z-order position of a control.
Versions 09 and later Anchor New in version 09 Anchor Anchor	..Anchor is used to manage the anchor of a control in a window or report.
Versions 09 and later Animation New in version 09 Animation Animation	..Animation is used to manage the animation of an image.
Versions 09 and later InitialAnimation New in version 09 InitialAnimation InitialAnimation	..InitialAnimation is used to find out the initial status of animation in an Image control, a button, a Static control or a Carousel control.
Versions 09 and later ToolTip New in version 09 ToolTip ToolTip	..ToolTip is used to find out and modify the text displayed in the tooltip associated with a control found in a window or in a page.
Versions 09 and later HorizontalAlignment New in version 09 HorizontalAlignment HorizontalAlignment	..HorizontalAlignment is used to find out and modify the horizontal alignment of a control.
Versions 09 and later VerticalAlignment New in version 09 VerticalAlignment VerticalAlignment	..VerticalAlignment is used to find out and modify the vertical alignment of a control.
Versions 14 and later Border New in version 14 Border Border	..Border is used to find out and modify the border characteristics: for a report control or for a report block. for a window control. for a cell of a Table control.
Versions 21 and later EndControl New in version 21 EndControl EndControl	..EndControl is used to find out and modify the end control of a Wire control.
Versions 21 and later StartControl New in version 21 StartControl StartControl	..StartControl is used to find out and modify the start control of a Wire control.
Versions 09 and later Color New in version 09 Color Color	..Color is used to find out and modify the font color for: a font variable. a text displayed in a Static control or in a calculated control of a report. a text displayed in a window control. a text displayed in a page control.
Versions 09 and later BackgroundColor New in version 09 BackgroundColor BackgroundColor	..BackgroundColor is used to manage the background color of a control, window, page or report block.
Versions 09 and later MouseCursor New in version 09 MouseCursor MouseCursor	..MouseCursor is used to find out and modify the rollover cursor defined for a control, a window or a page.
Versions 12 and later RightToLeft New in version 12 RightToLeft RightToLeft	..RightToLeft is used to find out the actual writing direction, effective on a control, a column, a window or a report.
Versions 15 and later VisualEffect New in version 15 VisualEffect VisualEffect	..VisualEffect is used to manage a visual effect on a control or on a group of controls found in a window.
Versions 09 and later Ellipsis New in version 09 Ellipsis Ellipsis	..Ellipsis is used to find out and modify the management mode of ellipsis in: a window control (Static, edit control, List box, Button, Combo box or Static table column). a Static control in a report.
Versions 10 and later Thickness New in version 10 Thickness Thickness	..Thickness is used to: Find out the thickness of the line for a series (Line charts only). Modify the thickness of the line for a series (Line charts only).
Versions 09 and later State New in version 09 State State	..State is used to find out and modify the display status of an element.
Versions 09 and later InitialState New in version 09 InitialState InitialState	..InitialState is used to find out the initial status of a control.
Versions 21 and later WinEditAllowed New in version 21 WinEditAllowed WinEditAllowed	..WinEditAllowed is used to find out and modify the operations allowed on a control when the window switches to the mode "Modification of UI by the end user".
Versions 09 and later MemoryFormat New in version 09 MemoryFormat MemoryFormat	..MemoryFormat is used to find out and modify the format of the value returned for: the Date or Time edit controls. the Date or Time table columns. the Calendar controls. the Static controls. the editable combo boxes. the table columns displayed by combo boxes.
Versions 21 and later ShapeExtremityEnd New in version 21 ShapeExtremityEnd ShapeExtremityEnd	..ShapeExtremityEnd is used to find out and modify the type of shape used for the end extremity of a Wire control.
Versions 21 and later ShapeExtremityStart New in version 21 ShapeExtremityStart ShapeExtremityStart	..ShapeExtremityStart is used to find out and modify the type of shape used for the start extremity of a Wire control.
Versions 21 and later ShapeExtremitySize New in version 21 ShapeExtremitySize ShapeExtremitySize	..ShapeExtremitySize is used to find out and modify the size of the shape at the start and end extremities of a Wire control.
Versions 17 and later Grayed New in version 17 Grayed Grayed	..Grayed is used to: Find out whether a control (or a group of controls) is grayed or not. Gray or ungray a control or a group of controls.
Versions 09 and later Group New in version 09 Group Group	..Group is used to: find out whether the control belongs to a group of controls. If the control belongs to one or more groups, ..Group is used to identify these groups of controls. associate a control with a group of controls.
Versions 09 and later Height New in version 09 Height Height	..Height is used to know and modify the height: of a control or block in a report. of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control. of a control (in a page), break header or footer in a Looper control. The control can be overlayable or not.
Versions 09 and later InitialHeight New in version 09 InitialHeight InitialHeight	..InitialHeight is used to: Find out the creation height of a control or window. Modify the base height used to anchor the controls "in height". Find out the creation height of a block or control in a report.
Versions 09 and later MaxHeight New in version 09 MaxHeight MaxHeight	..MaxHeight is used to find out and modify the maximum height of a control or window.
Versions 09 and later MinHeight New in version 09 MinHeight MinHeight	..MinHeight is used to find out and modify the minimum height of a control or window.
Versions 10 and later InterpretAmpersand New in version 10 InterpretAmpersand InterpretAmpersand	..InterpretAmpersand is used to find out and modify the mode for interpreting the '&' character in: the caption of a Static control. the elements of a List Box control. the elements of a Combo Box control. the values of a column in a Table control.
Versions 09 and later Width New in version 09 Width Width	..Width is used to find out and modify the width: of a control or block in a report. of a control (found in a window), window, column found in a table or column found in a list box (including listview). of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
Versions 09 and later InitialWidth New in version 09 InitialWidth InitialWidth	..InitialWidth is used to: Find out the initial width of a control or window. Modify the base width used to anchor the controls in "width". Find out the initial width of a report control.
Versions 09 and later MaxWidth New in version 09 MaxWidth MaxWidth	..MaxWidth is used to find out and modify the maximum width of a control or window.
Versions 09 and later MinWidth New in version 09 MinWidth MinWidth	..MinWidth is used to find out and modify the minimum width of a control or window.
Versions 09 and later FileLink New in version 09 FileLink FileLink	..FileLink is used to find out and modify the link between a control: and an item found in a data file. and a variable. and several variables.
Versions 09 and later Caption New in version 09 Caption Caption	In a database, ..Caption is used to: Find out the caption associated with a file item. Find out the caption associated with a data file. Find out and modify the connection caption. In a report, ..Caption is used to: Find out the text displayed in a Static control or in a link control. Modify the text displayed in a Static control or in a link control. In a window or in a page, ..Caption is used to: Find out and modify the caption of a control in a window or in a page. Find out and modify the caption of a menu option. Find out and modify the title of a window or page. Find out the content of a site map path.
Versions 09 and later InputMask New in version 09 InputMask InputMask	..InputMask is used to: find out the input mask. modify the input mask (among the available masks for the type).
Versions 11 and later Message New in version 11 Message Message	..Message is used to: Find out the help message associated with a control or with a menu option (in a window). Modify the help message associated with a control or with a menu option (in a window).
Versions 09 and later Modified New in version 09 Modified Modified	..Modified is used to find out whether a control (or a group of controls) was modified by the user (with the keyboard or with the mouse.
Versions 21 and later MaxNbSegment New in version 21 MaxNbSegment MaxNbSegment	..MaxNbSegment is used to find out and modify the maximum number of line segments for drawing a Wire control.
Versions 09 and later Name New in version 09 Name Name	..Name is used to find out: the name of the font associated with a Font variable. the name of a control, report or report block. the name of a control, group of controls or window. the name of a control, group of controls or page.
Versions 09 and later FullName New in version 09 FullName FullName	..FullName is used to find out the full name: of a control. of a window. of a menu option. of a table column.
Versions 09 and later Note New in version 09 Note Note	..Note is used to: Find out the notes associated with a control, a window, a page or a report. Modify the notes associated with a control, a window a page or a report.
Versions 09 and later HelpNumber New in version 09 HelpNumber HelpNumber	..HelpNumber is used to find out and modify the help number associated with a control.
Versions 09 and later Opacity New in version 09 Opacity Opacity	..Opacity is used to find out and define the percentage of opacity for a window or for the controls found in a window or in a page.
Versions 21 and later OriginPassingPoint New in version 21 OriginPassingPoint OriginPassingPoint	..OriginPassingPoint is used to find out and define the origin of the points whose coordinates are specified in ..WayPoint.
Versions 09 and later Plane New in version 09 Plane Plane	..Plane is used to: Find out: the active plane of a window (or report) or the plane to which a control belongs. the active plane of a WEBDEV element. Modify: the active plane of a window (or report) or associate a control with another plane. the active plane of a WEBDEV element.
Versions 21 and later AttachPointEnd New in version 21 AttachPointEnd AttachPointEnd	..AttachPointEnd is used to find out and modify the position of the end attach point in a Wire control.
Versions 21 and later AttachPointStart New in version 21 AttachPointStart AttachPointStart	..AttachPointStart is used to find out and modify the position of the start attach point in a Wire control.
Versions 21 and later WayPoint New in version 21 WayPoint WayPoint	..WayPoint is used to find out and modify the mandatory way points for a Wire control.
Versions 09 and later Font New in version 09 Font Font	..Font is used to: Find out the identifier of the font used in a control found in a report, in a page or in a window. Modify the font used in a control found in a report, in a page or in a window.
Versions 09 and later FontCharset New in version 09 FontCharset FontCharset	..FontCharset is used to: Find out the character set used by the screen fonts of a control. Modify the character set used by the screen fonts of a control.
Versions 09 and later FontStrikeOut New in version 09 FontStrikeOut FontStrikeOut	..FontStrikeOut is used to: Find out whether a text is struck out or not. Strike out (or not) the text displayed in a control.
Versions 09 and later FontCondensed New in version 09 FontCondensed FontCondensed	..FontCondensed is used to: Find out whether the characters in a text are condensed or not. Condense (or not) the characters in a text.
Versions 09 and later FontExtended New in version 09 FontExtended FontExtended	..FontExtended is used to: Find out whether the characters in a text are extended or not. Extend (or not) the characters displayed in a text.
Versions 09 and later FontBold New in version 09 FontBold FontBold	..FontBold is used to: Find out whether a text is bold or not. Modify the weight of a text.
Versions 09 and later FontItalic New in version 09 FontItalic FontItalic	..FontItalic is used to: Find out whether the italic attribute is assigned to a text. Modify the italic attribute of a text.
Versions 09 and later FontLarge New in version 09 FontLarge FontLarge	..FontLarge is used to: Find out whether the characters in a text are enlarged or not. Enlarge (or not) the characters in a text.
Versions 09 and later FontName New in version 09 FontName FontName	..FontName is used to: Find out the font used in a control. Modify the font used in a control.
Versions 09 and later FontUnderlined New in version 09 FontUnderlined FontUnderlined	..FontUnderlined is used to: Find out whether a text is underlined or not. Underline (or not) a text.
Versions 09 and later FontSize New in version 09 FontSize FontSize	..FontSize is used to: Find out the size of the font used in a control. Modify the size of the font used in a control.
Versions 09 and later RichEdit New in version 09 RichEdit RichEdit	..RichEdit is used to manage the RTF type (Rich Text Format): of an edit control or Static control found in a window. of a Static control found in a report.
Versions 15 and later TextDirection New in version 15 TextDirection TextDirection	..TextDirection is used to find out and modify the writing direction used in a window, in a report or in a control (useful for managing languages such as Arabic or Hebrew).
Versions 20 and later Style New in version 20 Style Style	..Style is used to find out and assign the entire style of a control (including the overrides).
Versions 09 and later AnchorRateBottom New in version 09 AnchorRateBottom AnchorRateBottom	..AnchorRateBottom is used to: Find out the anchor rate when a control moves on the vertical axis. Modify the anchor rate when a control moves on the vertical axis.
Versions 09 and later AnchorRateRight New in version 09 AnchorRateRight AnchorRateRight	..AnchorRateRight is used to: Find out the anchor rate when a control moves on the horizontal axis. Modify the anchor rate when a control moves on the horizontal axis.
Versions 09 and later AnchorRateHeight New in version 09 AnchorRateHeight AnchorRateHeight	..AnchorRateHeight is used to: Find out the anchor rate in height of a control. Modify the anchor rate in height of a control.
Versions 09 and later AnchorRateWidth New in version 09 AnchorRateWidth AnchorRateWidth	..AnchorRateWidth is used to: Find out the anchor rate when a control (or a table column) stretches on the horizontal axis. Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
Versions 21 and later ParallaxRateHeight New in version 21 ParallaxRateHeight ParallaxRateHeight	..ParallaxRateHeight is used to find out and specify the speed at which a control is reduced when the scrollbar found in the window, the internal window or the page moves.
Versions 21 and later ParallaxRateY New in version 21 ParallaxRateY ParallaxRateY	..ParallaxRateY is used to find out and specify the speed at which a control moves when the scrollbar found in the window, the internal window or the page moves.
Versions 09 and later NoteTitle New in version 09 NoteTitle NoteTitle	..NoteTitle is used to: Find out the title of the notes used in the program documentation of a control, window, page or report. Modify the title of the notes used in the program documentation of a control, window, page or report.
Versions 19 and later Process New in version 19 Process Process	..Process is used to modify the processes that must be run by the events available on a control, window, page, report, etc.
Versions 09 and later Type New in version 09 Type Type	..Type is used to find out: the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query). the type of object. the type of value stored in a variant.
Versions 09 and later InputType New in version 09 InputType InputType	..InputType is used to find out and modify the type of input allowed by a control: Duration, Date, Numeric, ...
Versions 12 and later Unicode New in version 12 Unicode Unicode	..Unicode is used to: Find out whether the value of a control is a Unicode string. Specify whether the value of a control is a Unicode string.
Versions 09 and later Value New in version 09 Value Value	..Value is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later DisplayedValue New in version 09 DisplayedValue DisplayedValue	..DisplayedValue is used to find out the value currently displayed on the screen in a window control or in a page control.
Versions 09 and later Visible New in version 09 Visible Visible	..Visible is used to: Find out whether an element is visible. Make an element visible or invisible.
Versions 09 and later InitialVisible New in version 09 InitialVisible InitialVisible	..InitialVisible is used to find out whether: a control was visible during the first display of associated window or page. a window was visible during its first display.
Versions 19 and later Pane New in version 19 Pane Pane	..Pane is used to: Find out the pane tabs associated with a control. Define the pane tabs associated with a control.
Versions 09 and later X New in version 09 X X	..X is used to: Find out the X coordinate of a control, of a Table control column or of a window (position on X axis). Modify the X coordinate of a control or window (position on X axis).
Versions 09 and later XInitial New in version 09 XInitial XInitial	..XInitial is used to: Find out the X coordinate: of a control (position on X axis) when opening the window or the page. of a window (position on X axis) when opening the window. Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window. Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report.
Versions 09 and later Y New in version 09 Y Y	..Y is used to: Find out the Y coordinate of a control or window (position on Y axis). Modify the Y coordinate of a control or window.
Versions 09 and later YInitial New in version 09 YInitial YInitial	..YInitial is used to: Find out the Y coordinate: of a control (position on Y axis) when opening the window or the page. of a window (position on Y axis) when opening the window. Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window. Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.