Properties associated with the Pivot Table control

ONLINE HELP
WINDEV, WEBDEV AND WINDEV MOBILE

Version:

Home | Sign in | English

Overview
Properties available in a window
Properties that can be used on the pivot table
Properties that can be used on a row, a column or a filter
Properties that can be used on a value displayed in a cell
Properties available in a report
Properties that can be used on the pivot table
Properties that can be used on a value displayed in a cell

WINDEV

WEBDEV

WINDEV Mobile

Others

See also

Properties associated with the Pivot Table control

Overview

A Pivot Table control can be handled in WLanguage:

in a window.
Versions 21 and later
in a report.
New in version 21
in a report.
in a report.

Properties available in a window

Properties that can be used on the pivot table

The following properties are associated with the Pivot Table controls:


Versions 09 and later Anchor New in version 09 Anchor Anchor	The Anchor property is used to set the anchors of a control in a window, page or report.
Versions 09 and later AnchorRateBottom New in version 09 AnchorRateBottom AnchorRateBottom	The AnchorRateBottom property is used to: Find out the anchor rate when a control moves on the vertical axis. Modify the anchor rate when a control moves on the vertical axis.
Versions 09 and later AnchorRateHeight New in version 09 AnchorRateHeight AnchorRateHeight	The AnchorRateHeight property is used to: Find out the vertical anchor rate of a control. Modify the vertical anchor rate of a control.
Versions 09 and later AnchorRateRight New in version 09 AnchorRateRight AnchorRateRight	The AnchorRateRight property is used to: Find out the anchor rate when a control moves on the horizontal axis. Modify the anchor rate when a control moves on the horizontal axis.
Versions 09 and later AnchorRateWidth New in version 09 AnchorRateWidth AnchorRateWidth	The AnchorRateWidth property is used to: Find out the anchor rate when a control (or a table column) stretches on the horizontal axis. Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
Versions 21 and later AutoLineWrap New in version 21 AutoLineWrap AutoLineWrap	The AutoLineWrap property is used to: find out whether the line wrap is automatically supported in a multiline edit control or in a column found in a table (or in a treeview table). indicate the line wrap management mode in a multiline edit control or in a column in a table (or in a treeview table)
Versions 15 and later AutomaticTooltip New in version 15 AutomaticTooltip AutomaticTooltip	The AutomaticTooltip property is used enable or disable automatic tooltips on List Box, Table and TreeView Table controls.
Versions 09 and later BackgroundColor New in version 09 BackgroundColor BackgroundColor	The BackgroundColor property is used to set the background color of a control, window, page or block of a report.
Versions 14 and later BackgroundImageLine New in version 14 BackgroundImageLine BackgroundImageLine	The BackgroundImageLine property is used to get and change the background image of each row: of a Table control, of a TreeView Table control, of a Looper control.
Versions 14 and later Border New in version 14 Border Border	The Border property is used to get and change the characteristics of the borders: for a report control or block. for a window control. for a cell of a Table control.
Versions 09 and later BrowsedFile New in version 09 BrowsedFile BrowsedFile	The BrowsedFile property is used to get and change the data source used to display records in controls based on a data file.
Versions 09 and later Caption New in version 09 Caption Caption	In a database, the Caption property is used to: Find out the caption associated with a file item. Find out the caption associated with a data file. Find out and modify the connection caption. In a report, the Caption property is used to: Find out the text displayed in a Static or Link control. Modify the text displayed in a Static or Link control. In a window or page, the Caption property is also used to: Find out and modify the caption of a control in a window or in a page. Find out and modify the caption of a menu option. Find out and modify the title of a window or page. Find out the content of a Breadcrumb control.
Versions 09 and later Color New in version 09 Color Color	The Color property is used to get or change the font color for: a font variable. a text displayed in a Static control or in a calculated control of a report. a text displayed in a window control. a text displayed in a page control.
Versions 12 and later Count New in version 12 Count Count	The Count property returns the number of elements in a given set.
Versions 09 and later DisplayEnabled New in version 09 DisplayEnabled DisplayEnabled	The DisplayEnabled property is used to: find out whether the display of a control or window is enabled or not. If the display is enabled, the content of the control is refreshed on a regular basis. enable (or not) the display of a control or window.
Versions 09 and later DndSource New in version 09 DndSource DndSource	The DndSource property is used to determine and change a control's drag-and-drop behavior.
Versions 09 and later DndTarget New in version 09 DndTarget DndTarget	DndTarget is used to find out and modify the behavior of a control during "Drag and Drop".
Versions 09 and later DoubleClick New in version 09 DoubleClick DoubleClick	The DoubleClick property is used to get and change the name of the Button control that will be executed when a control is double-clicked.
Versions 09 and later Empty New in version 09 Empty Empty	Empty is used to find out whether: a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control. a Chart control contains no series. a report control is empty (control linked to an item). an array (or an associative array) contains no element. an element of an associative array exists or not. a queue, a list or a stack contains no element.
Versions 16 and later FocusOnClick New in version 16 FocusOnClick FocusOnClick	The FocusOnClick property is used to: Find out whether a control gains focus during a click. Modify the effect for taking focus during the click on a control.
Versions 09 and later FontCharset New in version 09 FontCharset FontCharset	The FontCharset property is used to: Find out the character set used by the screen fonts of a control. Modify the character set used by the screen fonts of a control.
Versions 09 and later FullName New in version 09 FullName FullName	The FullName property is used to find out the full name: of a control. of a window. of a menu option. of a table column.
Versions 17 and later Grayed New in version 17 Grayed Grayed	The Grayed property is used to: Determine if a control (or a group of controls) is grayed out. Gray out or ungray a control, a group of controls or a window.
Versions 09 and later Group New in version 09 Group Group	The Group property is used to: find out whether the control belongs to a group of controls. If the control belongs to one or more groups, the Group property can be used to identify these groups of controls. associate a control with a group of controls.
Versions 09 and later Height New in version 09 Height Height	The Height property is used to get and change the height: of a control or block in a report. of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control. of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
Versions 09 and later HelpNumber New in version 09 HelpNumber HelpNumber	The HelpNumber property is used to identify and modify the help number associated with a control.
Versions 27 and later HideWhileScrolling New in version 27 HideWhileScrolling HideWhileScrolling	The HideWhileScrolling property is used to: Determine if the pinned control is hidden while scrolling, Show or hide the pinned control while scrolling.
Versions 09 and later InitialHeight New in version 09 InitialHeight InitialHeight	The InitialHeight property is used to: Find out the creation height of a control or window. Modify the base height used to anchor the controls "in height". Find out the creation height of a block or control in a report.
Versions 09 and later InitialState New in version 09 InitialState InitialState	The InitialState property is used to get the initial state of a control.
Versions 09 and later InitialVisible New in version 09 InitialVisible InitialVisible	The InitialVisible property is used to determine if: a control was visible during the first display of the associated window or page. a window was visible during its first display.
Versions 09 and later InitialWidth New in version 09 InitialWidth InitialWidth	The InitialWidth property is used to: Find out the initial width of a control or window. Modify the base width used to anchor the controls in "width". Find out the initial width of a report control.
Versions 11 and later LeftIndent New in version 11 LeftIndent LeftIndent	The LeftIndent property is used to get and change the space to the left of the text in: the columns of Table and TreeView Table controls (between the beginning of column and the beginning of text). the edit controls. the Combo Box and List Box controls. the Button controls. the Ribbon controls. the Tab controls. Static controls.
Versions 09 and later LineHeight New in version 09 LineHeight LineHeight	The LineHeight property is used to get and change the height of the rows: in a List Box control, in a ListView control (standard display mode only), in a Table control, in a Combo Box control, in a Looper control (height of the row), in an Organizer control.
Versions 09 and later MaxHeight New in version 09 MaxHeight MaxHeight	The MaxHeight property is used to get and change the maximum height of a control or window.
Versions 09 and later MaxWidth New in version 09 MaxWidth MaxWidth	The MaxWidth property is used to get and change the maximum width of a control or window.
Versions 11 and later Message New in version 11 Message Message	The Message property is used to: Find out the help message associated with a control or with a menu option (in a window). Modify the help message associated with a control or with a menu option (in a window).
Versions 09 and later MinHeight New in version 09 MinHeight MinHeight	The MinHeight property is used to get and change the minimum height of a control or window.
Versions 09 and later MinWidth New in version 09 MinWidth MinWidth	The MinWidth property is used to get and change the minimum width of a control or window.
Versions 09 and later MouseCursor New in version 09 MouseCursor MouseCursor	The MouseCursor property is used to identify and change the hover cursor defined for a control, window or page.
Versions 12 and later Multi-selection New in version 12 Multi-selection Multi-selection	The Multiselection property is used to get and change the selection mode: of a Table (and TreeView Table) control. of a Pivot Table control. of a List Box (and ListView) control. of a Looper control. of a Calendar control. of files in an Upload control.
Versions 09 and later Name New in version 09 Name Name	The Name property is used to get: the name of the font associated with a Font variable. the name of a control, report or report block. the name of a control, group of controls or window. the name of a control, group of controls or page.
Versions 09 and later NewLine New in version 09 NewLine NewLine	The New property is used to determine: in a Table control, whether the current row was created by TableAddXXX or TableInsertXXX. in a Looper control, whether the current row was created by LooperAddXXX or LooperInsertXXX. in an Organizer control, whether an appointment was created via the popup menu. in a Scheduler control, whether an appointment was created via the popup menu.
Versions 09 and later Note New in version 09 Note Note	The Note property is used to: Find out the notes associated with a control, a window, a page or a report. Modify the notes associated with a control, a window a page or a report.
Versions 09 and later NoteTitle New in version 09 NoteTitle NoteTitle	The NoteTitle property is used to: Get the title of the notes used in the technical documentation of a control, window, page or report. Change the title of the notes used in the technical documentation of a control, window, page or report.
Versions 09 and later NumberColumn New in version 09 NumberColumn NumberColumn	NumberColumn is used to: Find out the number of columns in a control containing columns (Table, Check Box, Radio Button controls, etc.). Modify the number of columns in a multi-column List Box control.
Versions 09 and later Opacity New in version 09 Opacity Opacity	The Opacity property is used to get and define the opacity percentage for a window, or for controls in a window or page.
Versions 19 and later Pane New in version 19 Pane Pane	The Pane property is used to: Find out the pane tabs associated with a control. Define the pane tabs associated with a control.
Versions 21 and later ParallaxRateHeight New in version 21 ParallaxRateHeight ParallaxRateHeight	The ParallaxRateHeight property is used to determine and specify how fast a control is reduced when the scrollbar in the window, internal window or page moves.
Versions 21 and later ParallaxRateY New in version 21 ParallaxRateY ParallaxRateY	The ParallaxRateY property is used to determine and specify how fast a control moves when the scrollbar in the window, internal window or page moves.
Versions 27 and later Pinned New in version 27 Pinned Pinned	The Pinned property is used to: Pin a control: the position of the pinned control will be relative to the visible area of its container and not to the content area. Determine if a control is pinned.
Versions 09 and later Plane New in version 09 Plane Plane	Plane is used to: Get: the active plane of a window (or report) or the plane to which a control belongs. the active plane of a WEBDEV element. Change: the active plane of a window (or report) or associate a control with another plane. the active plane of a WEBDEV element.
Versions 09 and later PopupMenu New in version 09 PopupMenu PopupMenu	The PopupMenu property is used to: Find out the custom context menu associated with a control or window. Modify the context menu associated with a control or window (associate another context menu with the control or window). Customize the system menus of controls by adding options.
Versions 19 and later Process New in version 19 Process Process	The Process property is used to modify the processes to be executed by the events available on a control, window, page, report, etc.
Versions 18 and later ProgressBar New in version 18 ProgressBar ProgressBar	The ProgressBar property is used to identify and change the Progress Bar control used when calculating a Pivot Table control (PVTCalculateAll and PVTCalculateUpdate functions).
Versions 09 and later RightClick New in version 09 RightClick RightClick	The RightClick property is used to get and change the name of the Button control that will be executed when an object is right-clicked.
Versions 12 and later RightToLeft New in version 12 RightToLeft RightToLeft	The RightToLeft property is used to get the writing direction on a control, column, window or report.
Versions 09 and later State New in version 09 State State	The State property is used to get and change the state of an element.
Versions 20 and later Style New in version 20 Style Style	The Style property is used to retrieve and assign the entire style of a control (including the overrides).
Versions 09 and later TABOrder New in version 09 TABOrder TABOrder	The TABOrder property is used to get and change the position of a control in the tab order of a window.
Versions 15 and later TextDirection New in version 15 TextDirection TextDirection	The TextDirection property is used to determine and change the writing direction in a window, report or control (useful for languages such as Arabic or Hebrew).
Versions 09 and later ToolTip New in version 09 ToolTip ToolTip	The ToolTip property is used to get and change the text displayed in the tooltip associated with a window or page control.
Versions 09 and later TotalsEnabled New in version 09 TotalsEnabled TotalsEnabled	The TotalsEnabled property enables you to: Find out the operating mode of column calculations (automatic or custom) for a Table or TreeView Table control, Temporarily forbid or force the column calculations (automatic or custom) in a Table or TreeView Table control.
Versions 09 and later Type New in version 09 Type Type	The Type property is used to get: the type of element described through programming (file or item description) or not (file or item defined in the data model editor, view or query). the type of object. the type of value stored in a variant.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.
Versions 26 and later VisibleWithAnimation New in version 26 VisibleWithAnimation VisibleWithAnimation	The VisibleWithAnimation property is used to make a control visible or invisible via the "Appear/Disappear" animation.
Versions 15 and later VisualEffect New in version 15 VisualEffect VisualEffect	The VisualEffect property allows you to apply a visual effect on a control or group of controls in a window.
Versions 09 and later Width New in version 09 Width Width	Width is used to find out and modify the width: of a control or block in a report. of a control (found in a window), window, column found in a table or column found in a list box (including listview). of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
Versions 21 and later WinEditAllowed New in version 21 WinEditAllowed WinEditAllowed	The WinEditAllowed property is used to determine and configure the actions allowed on a control when the window switches to "UI modification by end user" mode.
Versions 09 and later X New in version 09 X X	The X property is used to: Get the X-coordinate of a control, Table control column or window (position on the X-axis). Get the X-coordinate of a control or window (position on the X-axis).
Versions 09 and later XInitial New in version 09 XInitial XInitial	The XInitial property is used to: Get the X-coordinate: of a control (position on the X-axis) when opening the window or the page. of a window (position on X-axis) when opening the window. Change the X-coordinate of a control anchored "to the right" (position on the X-axis) when opening the window. Get the X-coordinate of a control in relation to its block (position in millimeters on the X-axis) when opening the report.
Versions 09 and later Y New in version 09 Y Y	The Y property is used to: Find out the Y-coordinate of a control or window (position on Y-axis). Modify the Y-coordinate of a control or window.
Versions 09 and later YInitial New in version 09 YInitial YInitial	The YInitial property is used to: Find out the Y-coordinate: of a control (position on Y axis) when opening the window or the page. of a window (position on Y axis) when opening the window. Modify the Y-coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window. Find out the Y-coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
Versions 12 and later Zoom New in version 12 Zoom Zoom	The Zoom property is used to get or change the zoom value: in an Image control. in a Map control. in an Organization Chart control. in a Table, TreeView Table, Pivot Table, Spreadsheet or List Box control. in a Word Processing control. in a PDF Reader control. in a Camera control. in a window.
Versions 09 and later ZOrder New in version 09 ZOrder ZOrder	The ZOrder property is used to manage the z-order of an element.

Properties that can be used on a row, a column or a filter

The following properties are associated with the rows, columns or filters found in a Pivot Table control:


Versions 09 and later Caption New in version 09 Caption Caption	In a database, the Caption property is used to: Find out the caption associated with a file item. Find out the caption associated with a data file. Find out and modify the connection caption. In a report, the Caption property is used to: Find out the text displayed in a Static or Link control. Modify the text displayed in a Static or Link control. In a window or page, the Caption property is also used to: Find out and modify the caption of a control in a window or in a page. Find out and modify the caption of a menu option. Find out and modify the title of a window or page. Find out the content of a Breadcrumb control.
Versions 18 and later Cumulated New in version 18 Cumulated Cumulated	The Cumulated property is used to determine if the value of a column or row in Pivot Table control corresponds to a total (total at the end of a row or column).
Versions 20 and later DisplayEvenIfNull New in version 20 DisplayEvenIfNull DisplayEvenIfNull	The DisplayEvenIfNull property is used to: Find out whether a row or a column in a Pivot Table control is displayed even if it contains no value. Configure a row or a column found in a Pivot Table control so that it is displayed (or not) even if it contains no value.
Versions 17 and later DisplayMask New in version 17 DisplayMask DisplayMask	The DisplayMask property is used to: Find out the display mask. Modify the display mask. This display mask is displayed when the control is in read-only or when the control does not have focus.
Versions 18 and later DisplayOrphan New in version 18 DisplayOrphan DisplayOrphan	The DisplayOrphan property is used to: Find out whether a row or a column found in a Pivot Table control is displayed when it has no parent. Modify the display mode of a row or column in a Pivot Table control when it has no parent.
Versions 18 and later FilterProcedure New in version 18 FilterProcedure FilterProcedure	The FilterProcedure property allows you to get and modify the procedure used to apply a filter on a row or column header when calculating a Pivot Table control.
Versions 09 and later MaxValue New in version 09 MaxValue MaxValue	The MaxValue property is used to: find out and modify the upper bound of a report based on a data file. find out the upper bound defined for the current filter. find out the maximum value of a chart series. find out and modify the maximum value for some types of controls.
Versions 09 and later MinValue New in version 09 MinValue MinValue	The MinValue property is used to: find out and modify the lower bound of a report based on a data file. find out the lower bound defined for the current filter. find out the minimum value of a chart series. find out and modify the minimum value for some types of controls.
Versions 09 and later Name New in version 09 Name Name	The Name property is used to get: the name of the font associated with a Font variable. the name of a control, report or report block. the name of a control, group of controls or window. the name of a control, group of controls or page.
Versions 19 and later Pane New in version 19 Pane Pane	The Pane property is used to: Find out the pane tabs associated with a control. Define the pane tabs associated with a control.
Versions 21 and later ParallaxRateHeight New in version 21 ParallaxRateHeight ParallaxRateHeight	The ParallaxRateHeight property is used to determine and specify how fast a control is reduced when the scrollbar in the window, internal window or page moves.
Versions 21 and later ParallaxRateY New in version 21 ParallaxRateY ParallaxRateY	The ParallaxRateY property is used to determine and specify how fast a control moves when the scrollbar in the window, internal window or page moves.
Versions 19 and later Process New in version 19 Process Process	The Process property is used to modify the processes to be executed by the events available on a control, window, page, report, etc.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 21 and later WinEditAllowed New in version 21 WinEditAllowed WinEditAllowed	The WinEditAllowed property is used to determine and configure the actions allowed on a control when the window switches to "UI modification by end user" mode.

Properties that can be used on a value displayed in a cell

The following properties are associated with the values displayed in a Pivot Table control:


Versions 12 and later AutomaticErase New in version 12 AutomaticErase AutomaticErase	The AutomaticErase property is used to: find out whether an edit control is in "Automatic erase" mode. modify the "Automatic erase" characteristic of an edit control.
Versions 09 and later BackgroundColor New in version 09 BackgroundColor BackgroundColor	The BackgroundColor property is used to set the background color of a control, window, page or block of a report.
Versions 11 and later BackgroundStyle New in version 11 BackgroundStyle BackgroundStyle	The BackgroundStyle property is used to get and modify the background style of cells in tables and/or treeview tables.
Versions 09 and later Caption New in version 09 Caption Caption	In a database, the Caption property is used to: Find out the caption associated with a file item. Find out the caption associated with a data file. Find out and modify the connection caption. In a report, the Caption property is used to: Find out the text displayed in a Static or Link control. Modify the text displayed in a Static or Link control. In a window or page, the Caption property is also used to: Find out and modify the caption of a control in a window or in a page. Find out and modify the caption of a menu option. Find out and modify the title of a window or page. Find out the content of a Breadcrumb control.
Versions 09 and later Color New in version 09 Color Color	The Color property is used to get or change the font color for: a font variable. a text displayed in a Static control or in a calculated control of a report. a text displayed in a window control. a text displayed in a page control.
Versions 18 and later Cumulated New in version 18 Cumulated Cumulated	The Cumulated property is used to determine if the value of a column or row in Pivot Table control corresponds to a total (total at the end of a row or column).
Versions 09 and later DisplayCurrency New in version 09 DisplayCurrency DisplayCurrency	The DisplayCurrency property is used to get and change the currency used when entering or displaying values in a "Currency + Euro" control.
Versions 09 and later DisplayedValue New in version 09 DisplayedValue DisplayedValue	The DisplayedValue property returns the value currently displayed in the control of a window or page.
Versions 17 and later DisplayMask New in version 17 DisplayMask DisplayMask	The DisplayMask property is used to: Find out the display mask. Modify the display mask. This display mask is displayed when the control is in read-only or when the control does not have focus.
Versions 09 and later Ellipsis New in version 09 Ellipsis Ellipsis	The Ellipsis property is used to determine and change the truncation mode with ellipses in: a window control (Static, edit control, List box, Button, Combo box or Static table column). a Static control in a report.
Versions 18 and later EmptyIfZero New in version 18 EmptyIfZero EmptyIfZero	The EmptyIfZero property is used to: Find out the management mode of zero value in a control. Modify the management mode of zero value in a control
Versions 09 and later Font New in version 09 Font Font	The Font property is used to Get the identifier of the font used in a control in a report, page or window. Change the font used in a control in a report, page or window.
Versions 09 and later FontBold New in version 09 FontBold FontBold	FontBold is used to: Determine if the text is bold. Change the weight of the text.
Versions 09 and later FontCharset New in version 09 FontCharset FontCharset	The FontCharset property is used to: Find out the character set used by the screen fonts of a control. Modify the character set used by the screen fonts of a control.
Versions 09 and later FontCondensed New in version 09 FontCondensed FontCondensed	The FontCondensed property is used to: Find out whether the characters in a text are condensed or not. Condense (or not) the characters in a text.
Versions 09 and later FontExtended New in version 09 FontExtended FontExtended	The FontExtended property is used to: Find out whether the spacing between characters in a text is increased. Increase the spacing between characters in a text.
Versions 09 and later FontItalic New in version 09 FontItalic FontItalic	FontItalic is used to: Determine if the text is italicized. Apply or remove italic formatting from the text.
Versions 09 and later FontLarge New in version 09 FontLarge FontLarge	FontLarge is used to: Find out whether the characters in a text are enlarged or not. Enlarge (or not) the characters in a text.
Versions 09 and later FontName New in version 09 FontName FontName	The FontName property is used to: Identify the font used in a control. Change the font used in a control.
Versions 09 and later FontSize New in version 09 FontSize FontSize	The FontSize property is used to: Identify the size of the font used in a control. Change the size of the font used in a control.
Versions 09 and later FontStrikeOut New in version 09 FontStrikeOut FontStrikeOut	The FontStrikeOut property is used to: Determine if the text displayed is struck through. Apply strikethrough formatting (or not) the text displayed in a control.
Versions 09 and later FontUnderlined New in version 09 FontUnderlined FontUnderlined	FontUnderlined is used to: Find out whether a text is underlined or not. Underline (or not) a text.
Versions 09 and later FullName New in version 09 FullName FullName	The FullName property is used to find out the full name: of a control. of a window. of a menu option. of a table column.
Versions 17 and later Grayed New in version 17 Grayed Grayed	The Grayed property is used to: Determine if a control (or a group of controls) is grayed out. Gray out or ungray a control, a group of controls or a window.
Versions 09 and later Group New in version 09 Group Group	The Group property is used to: find out whether the control belongs to a group of controls. If the control belongs to one or more groups, the Group property can be used to identify these groups of controls. associate a control with a group of controls.
Versions 09 and later Height New in version 09 Height Height	The Height property is used to get and change the height: of a control or block in a report. of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control. of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
Versions 09 and later HelpNumber New in version 09 HelpNumber HelpNumber	The HelpNumber property is used to identify and modify the help number associated with a control.
Versions 09 and later HorizontalAlignment New in version 09 HorizontalAlignment HorizontalAlignment	The HorizontalAlignment property is used to get and change the horizontal alignment of a control.
Versions 09 and later InitialHeight New in version 09 InitialHeight InitialHeight	The InitialHeight property is used to: Find out the creation height of a control or window. Modify the base height used to anchor the controls "in height". Find out the creation height of a block or control in a report.
Versions 09 and later InitialState New in version 09 InitialState InitialState	The InitialState property is used to get the initial state of a control.
Versions 09 and later InitialVisible New in version 09 InitialVisible InitialVisible	The InitialVisible property is used to determine if: a control was visible during the first display of the associated window or page. a window was visible during its first display.
Versions 09 and later InitialWidth New in version 09 InitialWidth InitialWidth	The InitialWidth property is used to: Find out the initial width of a control or window. Modify the base width used to anchor the controls in "width". Find out the initial width of a report control.
Versions 09 and later InputMask New in version 09 InputMask InputMask	The InputMask property is used to: find out the input mask. modify the input mask (among the available masks for the type).
Versions 09 and later InputType New in version 09 InputType InputType	The InputType property is used to identify or change the type of input supported by a control: Duration, Date, Numeric, etc.
Versions 10 and later InterpretAmpersand New in version 10 InterpretAmpersand InterpretAmpersand	The InterpretAmpersand property is used to determine and change how the '&' character is interpreted in: the caption of a Static control. the elements of a List Box control. the elements of a Combo Box control. the values of a column in a Table control.
Versions 11 and later LeftIndent New in version 11 LeftIndent LeftIndent	The LeftIndent property is used to get and change the space to the left of the text in: the columns of Table and TreeView Table controls (between the beginning of column and the beginning of text). the edit controls. the Combo Box and List Box controls. the Button controls. the Ribbon controls. the Tab controls. Static controls.
Versions 09 and later MemoryCurrency New in version 09 MemoryCurrency MemoryCurrency	The MemoryCurrency property is used to get and change the currency used when manipulating a "Currency + Euro" control programmatically.
Versions 09 and later MemoryFormat New in version 09 MemoryFormat MemoryFormat	The MemoryFormat property is used to get and change the format of the value returned for: Date or Time edit controls. Date or Time table columns. Calendar controls. Static controls. editable combo boxes. table columns displayed by combo boxes.
Versions 09 and later MinWidth New in version 09 MinWidth MinWidth	The MinWidth property is used to get and change the minimum width of a control or window.
Versions 09 and later MouseCursor New in version 09 MouseCursor MouseCursor	The MouseCursor property is used to identify and change the hover cursor defined for a control, window or page.
Versions 09 and later Name New in version 09 Name Name	The Name property is used to get: the name of the font associated with a Font variable. the name of a control, report or report block. the name of a control, group of controls or window. the name of a control, group of controls or page.
Versions 09 and later Note New in version 09 Note Note	The Note property is used to: Find out the notes associated with a control, a window, a page or a report. Modify the notes associated with a control, a window a page or a report.
Versions 09 and later NoteTitle New in version 09 NoteTitle NoteTitle	The NoteTitle property is used to: Get the title of the notes used in the technical documentation of a control, window, page or report. Change the title of the notes used in the technical documentation of a control, window, page or report.
Versions 21 and later ParallaxRateHeight New in version 21 ParallaxRateHeight ParallaxRateHeight	The ParallaxRateHeight property is used to determine and specify how fast a control is reduced when the scrollbar in the window, internal window or page moves.
Versions 21 and later ParallaxRateY New in version 21 ParallaxRateY ParallaxRateY	The ParallaxRateY property is used to determine and specify how fast a control moves when the scrollbar in the window, internal window or page moves.
Versions 09 and later PopupMenu New in version 09 PopupMenu PopupMenu	The PopupMenu property is used to: Find out the custom context menu associated with a control or window. Modify the context menu associated with a control or window (associate another context menu with the control or window). Customize the system menus of controls by adding options.
Versions 19 and later Process New in version 19 Process Process	The Process property is used to modify the processes to be executed by the events available on a control, window, page, report, etc.
Versions 09 and later Selected New in version 09 Selected Selected	The Selected property is used to select a row and to determine if a row is selected (in a List Box, ListView or Table control).
Versions 11 and later Size New in version 11 Size Size	The Size property is used to determine and change the size of an element.
Versions 09 and later State New in version 09 State State	The State property is used to get and change the state of an element.
Versions 15 and later TextDirection New in version 15 TextDirection TextDirection	The TextDirection property is used to determine and change the writing direction in a window, report or control (useful for languages such as Arabic or Hebrew).
Versions 09 and later ToolTipTitle New in version 09 ToolTipTitle ToolTipTitle	The ToolTipTitle property is used to get and change the text displayed as tooltip of a column title in a Table control. This tooltip only appears when the Table control column title is hovered over.
Versions 09 and later Type New in version 09 Type Type	The Type property is used to get: the type of element described through programming (file or item description) or not (file or item defined in the data model editor, view or query). the type of object. the type of value stored in a variant.
Versions 12 and later Unicode New in version 12 Unicode Unicode	The Unicode property is used to: Determine if the value of a control is a Unicode string. Specify whether the value of a control is a Unicode string.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later VerticalAlignment New in version 09 VerticalAlignment VerticalAlignment	The VerticalAlignment property is used to get and change the vertical alignment of a control.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.
Versions 09 and later Width New in version 09 Width Width	Width is used to find out and modify the width: of a control or block in a report. of a control (found in a window), window, column found in a table or column found in a list box (including listview). of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
Versions 21 and later WinEditAllowed New in version 21 WinEditAllowed WinEditAllowed	The WinEditAllowed property is used to determine and configure the actions allowed on a control when the window switches to "UI modification by end user" mode.

Versions 21 and later

Properties available in a report

Properties that can be used on the pivot table

The following properties are associated with the Pivot Table controls:


Versions 27 and later BlurLevel New in version 27 BlurLevel BlurLevel	The BlurLevel property gets and changes the percentage of blur applied to a control in a report.
Versions 11 and later Collapsed New in version 11 Collapsed Collapsed	The Collapsed property is used to: get or define the state (collapsed or expanded) that will be used when rows are added to a TreeView Table control. find out or modify the collapsed/expanded status for: the breaks of a Table control, the breaks of a Looper control, a Drawer control, a Ribbon control, a Navigation Bar control. a Pivot Table control in a report.
Versions 09 and later Height New in version 09 Height Height	The Height property is used to get and change the height: of a control or block in a report. of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control. of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
Versions 27 and later Hidden New in version 27 Hidden Hidden	The Hidden is used to: Determine if a control in a report is hidden. Redact or blur a control in a report.
Versions 09 and later Note New in version 09 Note Note	The Note property is used to: Find out the notes associated with a control, a window, a page or a report. Modify the notes associated with a control, a window a page or a report.
Versions 09 and later NoteTitle New in version 09 NoteTitle NoteTitle	The NoteTitle property is used to: Get the title of the notes used in the technical documentation of a control, window, page or report. Change the title of the notes used in the technical documentation of a control, window, page or report.
Versions 09 and later Plane New in version 09 Plane Plane	Plane is used to: Get: the active plane of a window (or report) or the plane to which a control belongs. the active plane of a WEBDEV element. Change: the active plane of a window (or report) or associate a control with another plane. the active plane of a WEBDEV element.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.

Properties that can be used on a value displayed in a cell

The following properties are associated with the values displayed in a Pivot Table control:


Versions 09 and later BackgroundColor New in version 09 BackgroundColor BackgroundColor	The BackgroundColor property is used to set the background color of a control, window, page or block of a report.
Versions 27 and later BlurLevel New in version 27 BlurLevel BlurLevel	The BlurLevel property gets and changes the percentage of blur applied to a control in a report.
Versions 09 and later Color New in version 09 Color Color	The Color property is used to get or change the font color for: a font variable. a text displayed in a Static control or in a calculated control of a report. a text displayed in a window control. a text displayed in a page control.
Versions 09 and later Font New in version 09 Font Font	The Font property is used to Get the identifier of the font used in a control in a report, page or window. Change the font used in a control in a report, page or window.
Versions 27 and later Hidden New in version 27 Hidden Hidden	The Hidden is used to: Determine if a control in a report is hidden. Redact or blur a control in a report.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.

New in version 21

Properties available in a report

Properties that can be used on the pivot table

The following properties are associated with the Pivot Table controls:


Versions 27 and later BlurLevel New in version 27 BlurLevel BlurLevel	The BlurLevel property gets and changes the percentage of blur applied to a control in a report.
Versions 11 and later Collapsed New in version 11 Collapsed Collapsed	The Collapsed property is used to: get or define the state (collapsed or expanded) that will be used when rows are added to a TreeView Table control. find out or modify the collapsed/expanded status for: the breaks of a Table control, the breaks of a Looper control, a Drawer control, a Ribbon control, a Navigation Bar control. a Pivot Table control in a report.
Versions 09 and later Height New in version 09 Height Height	The Height property is used to get and change the height: of a control or block in a report. of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control. of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
Versions 27 and later Hidden New in version 27 Hidden Hidden	The Hidden is used to: Determine if a control in a report is hidden. Redact or blur a control in a report.
Versions 09 and later Note New in version 09 Note Note	The Note property is used to: Find out the notes associated with a control, a window, a page or a report. Modify the notes associated with a control, a window a page or a report.
Versions 09 and later NoteTitle New in version 09 NoteTitle NoteTitle	The NoteTitle property is used to: Get the title of the notes used in the technical documentation of a control, window, page or report. Change the title of the notes used in the technical documentation of a control, window, page or report.
Versions 09 and later Plane New in version 09 Plane Plane	Plane is used to: Get: the active plane of a window (or report) or the plane to which a control belongs. the active plane of a WEBDEV element. Change: the active plane of a window (or report) or associate a control with another plane. the active plane of a WEBDEV element.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.

Properties that can be used on a value displayed in a cell

The following properties are associated with the values displayed in a Pivot Table control:


Versions 09 and later BackgroundColor New in version 09 BackgroundColor BackgroundColor	The BackgroundColor property is used to set the background color of a control, window, page or block of a report.
Versions 27 and later BlurLevel New in version 27 BlurLevel BlurLevel	The BlurLevel property gets and changes the percentage of blur applied to a control in a report.
Versions 09 and later Color New in version 09 Color Color	The Color property is used to get or change the font color for: a font variable. a text displayed in a Static control or in a calculated control of a report. a text displayed in a window control. a text displayed in a page control.
Versions 09 and later Font New in version 09 Font Font	The Font property is used to Get the identifier of the font used in a control in a report, page or window. Change the font used in a control in a report, page or window.
Versions 27 and later Hidden New in version 27 Hidden Hidden	The Hidden is used to: Determine if a control in a report is hidden. Redact or blur a control in a report.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.

Properties available in a report

Properties that can be used on the pivot table

The following properties are associated with the Pivot Table controls:


Versions 27 and later BlurLevel New in version 27 BlurLevel BlurLevel	The BlurLevel property gets and changes the percentage of blur applied to a control in a report.
Versions 11 and later Collapsed New in version 11 Collapsed Collapsed	The Collapsed property is used to: get or define the state (collapsed or expanded) that will be used when rows are added to a TreeView Table control. find out or modify the collapsed/expanded status for: the breaks of a Table control, the breaks of a Looper control, a Drawer control, a Ribbon control, a Navigation Bar control. a Pivot Table control in a report.
Versions 09 and later Height New in version 09 Height Height	The Height property is used to get and change the height: of a control or block in a report. of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control. of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
Versions 27 and later Hidden New in version 27 Hidden Hidden	The Hidden is used to: Determine if a control in a report is hidden. Redact or blur a control in a report.
Versions 09 and later Note New in version 09 Note Note	The Note property is used to: Find out the notes associated with a control, a window, a page or a report. Modify the notes associated with a control, a window a page or a report.
Versions 09 and later NoteTitle New in version 09 NoteTitle NoteTitle	The NoteTitle property is used to: Get the title of the notes used in the technical documentation of a control, window, page or report. Change the title of the notes used in the technical documentation of a control, window, page or report.
Versions 09 and later Plane New in version 09 Plane Plane	Plane is used to: Get: the active plane of a window (or report) or the plane to which a control belongs. the active plane of a WEBDEV element. Change: the active plane of a window (or report) or associate a control with another plane. the active plane of a WEBDEV element.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.

Properties that can be used on a value displayed in a cell

The following properties are associated with the values displayed in a Pivot Table control:


Versions 09 and later BackgroundColor New in version 09 BackgroundColor BackgroundColor	The BackgroundColor property is used to set the background color of a control, window, page or block of a report.
Versions 27 and later BlurLevel New in version 27 BlurLevel BlurLevel	The BlurLevel property gets and changes the percentage of blur applied to a control in a report.
Versions 09 and later Color New in version 09 Color Color	The Color property is used to get or change the font color for: a font variable. a text displayed in a Static control or in a calculated control of a report. a text displayed in a window control. a text displayed in a page control.
Versions 09 and later Font New in version 09 Font Font	The Font property is used to Get the identifier of the font used in a control in a report, page or window. Change the font used in a control in a report, page or window.
Versions 27 and later Hidden New in version 27 Hidden Hidden	The Hidden is used to: Determine if a control in a report is hidden. Redact or blur a control in a report.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.