ONLINE HELP
 WINDEVWEBDEV AND WINDEV MOBILE

  • Overview
  • Properties available in a window
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac CatalystUniversal Windows 10 App
Others
Stored procedures
Properties associated with the Image Editor control
Overview
You can manipulate an Image Editor control in a window using the following WLanguage properties.
Properties available in a window
The following properties are associated with Image Editor controls:
AnchorThe Anchor property is used to set the anchors of a control in a window, page or report.
AnchorRateBottomThe AnchorRateBottom property is used to:
  • Find out the anchor rate when a control moves on the vertical axis.
  • Modify the anchor rate when a control moves on the vertical axis.
AnchorRateHeightThe AnchorRateHeight property is used to:
  • Find out the vertical anchor rate of a control.
  • Modify the vertical anchor rate of a control.
AnchorRateRightThe AnchorRateRight property is used to:
  • Find out the anchor rate when a control moves on the horizontal axis.
  • Modify the anchor rate when a control moves on the horizontal axis.
AnchorRateWidthThe AnchorRateWidth property is used to:
  • Find out the anchor rate when a control (or a table column) stretches on the horizontal axis.
  • Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
DisplayEnabledThe DisplayEnabled property is used to:
  • find out whether the display of a control or window is enabled or not. If the display is enabled, the content of the control is refreshed on a regular basis.
  • enable (or not) the display of a control or window.
EmptyEmpty is used to find out whether:
  • a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control.
  • a Chart control contains no series.
  • a report control is empty (control linked to an item).
  • an array (or an associative array) contains no element.
  • an element of an associative array exists or not.
  • a queue, a list or a stack contains no element.
FilePathThe FilePath property is used to identify:
  • the name of the xlsx file associated with a Spreadsheet control.
  • the name of the file associated with an Image Editor control.
  • the name of the PDF file associated with a PDF Reader control.
  • the name of the DOCX file associated with a Word Processing control.
  • the name of the wddiag file associated with a Diagram Editor control.
FullNameThe FullName property is used to find out the full name:
  • of a control.
  • of a window.
  • of a menu option.
  • of a table column.
GrayedThe Grayed property is used to:
  • Determine if a control (or a group of controls) is grayed out.
  • Gray out or ungray a control, a group of controls or a window.
GroupThe Group property is used to:
  • find out whether the control belongs to a group of controls. If the control belongs to one or more groups, the Group property can be used to identify these groups of controls.
  • associate a control with a group of controls.
HeightThe Height property is used to get and change the height:
  • of a control or block in a report.
  • of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control.
  • of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
HelpNumberThe HelpNumber property is used to identify and modify the help number associated with a control.
HideWhileScrollingThe HideWhileScrolling property is used to:
  • Determine if the pinned control is hidden while scrolling,
  • Show or hide the pinned control while scrolling.
ImageInitialHeightThe ImageInitialHeight property is used to get and set the default height of the image created in an Image Editor control.
ImageInitialWidthThe ImageInitialWidth property is used to get and set the default width of the image created in an Image Editor control.
ImageTypeThe ImageType property is used to get the type of image being edited in an Image Editor control (icon or image).
InitialHeightThe InitialHeight property is used to:
  • Find out the creation height of a control or window.
  • Modify the base height used to anchor the controls "in height".
  • Find out the creation height of a block or control in a report.
InitialStateThe InitialState property is used to get the initial state of a control.
InitialToolThe InitialTool property is used to get or change the drawing tool selected by default in an Image Editor control.
InitialValueThe InitialValue property is used to get the initial value of a control in a window or page.
InitialVisibleThe InitialVisible property is used to determine if:
  • a control was visible during the first display of the associated window or page.
  • a window was visible during its first display.
InitialWidthThe InitialWidth property is used to:
  • Find out the initial width of a control or window.
  • Modify the base width used to anchor the controls in "width".
  • Find out the initial width of a report control.
MaxHeightThe MaxHeight property is used to get and change the maximum height of a control or window.
MaxWidthThe MaxWidth property is used to get and change the maximum width of a control or window.
MinHeightThe MinHeight property is used to get and change the minimum height of a control or window.
MinWidthThe MinWidth property is used to get and change the minimum width of a control or window.
ModifiedThe Modified property is used to determine if a control or group of controls has been modified by the user (keyboard or mouse input).
NameThe Name property is used to get:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
NewLineThe NewLine property is used to determine:
  • in a Table control, whether the current row was created with TableAddXXX or TableInsertXXX.
  • in a Looper control, whether the current row was created with LooperAddXXX or LooperInsertXXX.
  • in an Organizer control, whether an appointment was created via the popup menu.
  • in a Scheduler control, whether an appointment was created via the popup menu.
NoteThe Note property is used to:
  • Find out the notes associated with a control, a window, a page or a report.
  • Modify the notes associated with a control, a window a page or a report.
NoteTitleThe NoteTitle property is used to:
  • Get the title of the notes used in the technical documentation of a control, window, page or report.
  • Change the title of the notes used in the technical documentation of a control, window, page or report.
PaneThe Pane property is used to:
  • Find out the pane tabs associated with a control.
  • Define the pane tabs associated with a control.
PaneVisibleThe PaneVisible property is used to:
  • determine if the pane of the Image Editor control is visible,
  • show or hide the pane of the Image Editor control.
PinnedThe Pinned property is used to:
  • Pin a control: the position of the pinned control will be relative to the visible area of its container and not to the content area.
  • Determine if a control is pinned.
PlanePlane is used to:
  • Get:
    • the active plane of a window (or report) or the plane to which a control belongs.
    • the active plane of a WEBDEV element.
  • Change:
    • the active plane of a window (or report) or associate a control with another plane.
    • the active plane of a WEBDEV element.
ProcessThe Process property is used to modify the processes to be executed by the events available on a control, window, page, report, etc.
RibbonThe Ribbon property is used to access the Ribbon control of the associated control (Word Processing, PDF Reader, Spreadsheet, Image Editor, HTML Editor or Diagram Editor controls).
StateThe State property is used to get and change the state of an element.
ToolbarVisibleThe ToolbarVisible property is used to:
  • know if the toolbar or the ribbon is displayed in a control.
  • show or hide the toolbar or the ribbon in a control.
TypeThe Type property is used to get:
  • the type of element described through programming (file or item description) or not (file or item defined in the data model editor, view or query).
  • the type of object.
  • the type of value stored in a variant.
ValueThe Value property is used to:
  • Find out and modify the value of a report control.
  • Find out and modify the value of a control or the title of a window.
  • Find out the identifier of a stream.
  • Find out and modify the value of a control or the title of a page.
VisibleThe Visible property is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
VisibleWithAnimationThe VisibleWithAnimation property is used to make a control visible or invisible via the "Appear/Disappear" animation.
WidthThe Width property gets and changes the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
XThe X property is used to:
  • Get the X-coordinate of a control, Table control column or window (position on the X-axis).
  • Get the X-coordinate of a control or window (position on the X-axis).
XInitialThe XInitial property is used to:
  • Get the X-coordinate:
    • of a control (position on the X-axis) when opening the window or the page.
    • of a window (position on X-axis) when opening the window.
  • Change the X-coordinate of a control anchored "to the right" (position on the X-axis) when opening the window.
  • Get the X-coordinate of a control in relation to its block (position in millimeters on the X-axis) when opening the report.
YThe Y property is used to:
  • Find out the Y-coordinate of a control or window (position on Y-axis).
  • Modify the Y-coordinate of a control or window.
YInitialThe YInitial property is used to:
  • Find out the Y-coordinate:
    • of a control (position on Y-axis) when opening the window or the page.
    • of a window (position on Y-axis) when opening the window.
  • Modify the Y-coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y-coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
ZoomThe Zoom property is used to get or change the zoom value:
  • in an Image control.
  • in a Map control.
  • in an Organization Chart control.
  • in a Table, TreeView Table, Pivot Table, Spreadsheet or List Box control.
  • in a Word Processing control.
  • in a PDF Reader control.
  • in a Camera control.
  • in a Diagram Editor control;
  • in a window.
ZOrderThe ZOrder property is used to manage the Z-order of an element.
Minimum version required
  • Version 23
Comments
Click [Add] to post a comment