PC SOFT

ONLINE HELP
 WINDEVWEBDEV AND WINDEV MOBILE

Home | Sign in | English EN
  • Value of Static control
  • Value of Calculated control in a report
  • Value of Bar Code control
  • Value of Image control
  • Value of Static control or preset control found in a report
  • Value of RTF control
  • Value of window or page
  • Value of edit control
  • Value of Button control
  • Value of Check Box control or value of option in a Check Box control
  • Value of Radio Button control
  • Value of List Box, ListView or Table control
  • Value of cell in a Table control
  • Value of Combo Box control
  • Value of Tab control
  • Value of Chart control
  • Value of Rating control
  • Value of Drawer control
  • Value of HTML control
  • Value of Map control
  • Value of Site Map Path control
  • Button, Link and iFrame: URL and Value properties
  • Upload control
  • Range Slider control
  • Value of Sliding Banner control
  • Limitations
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
The Value property is used to:
  • Find out and modify the value of a report control.
  • Find out and modify the value of a control or the title of a window.
  • Find out the identifier of a stream.
  • Find out and modify the value of a control or the title of a page.
  • Versions 15 and later
    WEBDEV - Server codeWEBDEV - Browser code Find out the files managed by an Upload control.
    New in version 15
    WEBDEV - Server codeWEBDEV - Browser code Find out the files managed by an Upload control.
    WEBDEV - Server codeWEBDEV - Browser code Find out the files managed by an Upload control.
  • Versions 22 and later
    WEBDEV - Server codeWEBDEV - Browser codePHP Find out and modify the plane currently displayed in a Sliding Banner control.
    New in version 22
    WEBDEV - Server codeWEBDEV - Browser codePHP Find out and modify the plane currently displayed in a Sliding Banner control.
    WEBDEV - Server codeWEBDEV - Browser codePHP Find out and modify the plane currently displayed in a Sliding Banner control.
  • WEBDEV - Server codeWEBDEV - Browser code Center the map found in a Map control on a specific position.
  • Versions 18 and later
    WEBDEV - Server codeWEBDEV - Browser codePHP Find out and modify the lower value of the interval currently selected in a Range Slider control.
    New in version 18
    WEBDEV - Server codeWEBDEV - Browser codePHP Find out and modify the lower value of the interval currently selected in a Range Slider control.
    WEBDEV - Server codeWEBDEV - Browser codePHP Find out and modify the lower value of the interval currently selected in a Range Slider control.
  • Versions 18 and later
    Find out the value associated with a value of an Enumeration variable.
    New in version 18
    Find out the value associated with a value of an Enumeration variable.
    Find out the value associated with a value of an Enumeration variable.
Remark: The Value property is rarely used and can be replaced by an equivalent syntax (see Remarks).
Example
// Modify the image file associated with the "IMG_Image" control
IMG_Image.Value = "C:\MyImages\Image.BMP"
Syntax

Finding out the value of an element Hide the details

<Result> = <Element used>.Value
<Result>: Any type
This result depends on the element type.
<Element used>: Type of element
Name of element to use.

Modifying the value of an element Hide the details

<Element used>.Value = <New value>
<Element used>: Type of element
Name of element to use.
<New value>: Any type
New value for the specified element. This parameter depends on the type of specified element.
Remarks
WEBDEV - Server codePHPAjax

Value of Static control

The Value property is used to retrieve or modify the text of a Static control.
<Result> is a character string.
To retrieve the text of a Static control, the following syntaxes are equivalent:
ResCaption = <Static control>.Value
ResCaption = <Static control>
ResCaption = <Static control>.Caption
WEBDEV - Server code

Value of Calculated control in a report

The Value property is used to retrieve or modify the value of a Calculated control in a report.
The type of <Result> depends on the type of the Calculated control.
To retrieve the value of a Calculated control, use one of the following syntaxes:
ResValue = <Calculated control>.Value

ResValue = <Calculated control>
WEBDEV - Server codePHPAjax

Value of Bar Code control

The Value property is used to retrieve or modify the value of a Bar Code control. The value of a Bar Code control corresponds to the character string represented in the bar code.
<Result> is a character string.
To retrieve the text of a Bar Code control, use one of the following syntaxes:
ResValue = <Bar Code control>.Value

ResValue = <Bar Code control>
WEBDEV - Server codePHPAjax

Value of Image control

The Value property is used to identify or modify the image file associated with an Image control.
<Result> is a character string containing the path of the image file.
To identify the image file associated with an Image control, use one of the following syntaxes:
ResImage = <Image control>.Value

ResImage = <Image control>
WEBDEV - Server code

Value of Static control or preset control found in a report

The Value property is used to identify or modify the content of the control.
In an assignment, the type of the value passed to the Value property depends on the type of the item associated with the control.
If the item is numeric, you must assign a number to it and make sure you use the right input mask (InputMask property).
A date must be assigned to a Date control.
WEBDEV - Server codePHPAjax

Value of RTF control

The Value property is used to retrieve or modify the content of an RTF control. This content is composed of RTF-specific characters.
<Result> is a character string.
To retrieve the content of an RTF control, use one of the following syntaxes:
ResRTF = <RTF control>.Value

ResRTF = <RTF control>
WEBDEV - Server codePHPAjax

Value of window or page

The Value property is used to retrieve or change the title of a window or page.
<Result> is a character string.
The Value and Title properties are equivalent.
To find out the title of a window or the title of a page, use one of the following syntaxes:
ResTitle = <Name of window or page>.Value

ResTitle = <Name of window or page>

ResTitle = <Name of window or page>.Title
WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Value of edit control

The Value property is used to retrieve or change the value entered in an Edit control.
<Result> has the following type:
  • character string if the sub-type of edit control corresponds to "Text", "Date" or "Time",
  • integer or real if the subtype of the Edit control corresponds to "Numeric",
  • numeric if the subtype of the Edit control corresponds to "Currency" or "Currency + Euro".
To find out the value typed in an edit control, use one of the following syntaxes:
ResValue = <Edit control>.Value

ResValue = <Edit control>
WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Value of Button control

The Value property is used to retrieve and modify the text of a Button control.
If the Button control contains an image, only the text is returned. It is not possible to assign a drawing to a Button control.
<Result> is a character string.
The Value and Caption properties are equivalent.
To know the text of a Button control, use one of the following syntaxes:
ResButton = <Button control>.Value

ResButton = <Button control>

ResButton = <Button control>.Caption
WEBDEV - Browser code The Value property is used to change the image of an Image Button control without a hover image. It is recommnded to use the Image property instead to change the image of the Button control.

Value of Check Box control or value of option in a Check Box control

The Value property is used to:
  • Check or uncheck an option in a Check Box control.
  • Find out whether an option found in a Check Box control is checked or unchecked
<Result> is a boolean:
  • True if the option is checked,
  • False otherwise.
To find out whether an option found in a Check Box control is checked or not, use one of the following syntaxes:
ResChecked = <Check Box control>[<Option number>].Value

ResChecked = <Check Box control>[<Option number>]

ResChecked = <Option name>.Value

ResChecked = <Option name>
Remark: If <Option number> is not specified, the first option is selected by default.
WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Value of Radio Button control

The Value property is used to:
  • Find out the active option in a Radio Button control.
  • Select an option.
<Result> is an integer.
To find out the active option in a Radio Button control, use one of the following syntaxes:
ResOption = <Radio Button control>.Value

ResOption = <Radio Button control>
Remark: A Radio Button control is always positioned on a position (1 by default). To display a Radio Button control with no default option, all you have to do is assign -1 to the control value during its initialization:
// Initialize the value of "RADIO_Customer" with its initial value
RADIO_Customer.InitialValue = -1
WEBDEV - Server codePHPAjax

Value of List Box, ListView or Table control

Two distinct cases may occur.
  • The List Box (ListView or Table) control is a memory control OR the StoredItem property corresponds to an empty string ("").
    The Value property is used to:
    • Find out the selected row. If no row is selected, the Value property returns -1. If the control allows for multiple selection, the number of the last selected row is returned.
      To find out the selected row, use one of the following syntaxes:
      ResRow = <Control name>.Value

      ResRow = <Control name>
    • Move the selection by specifying the number of the new row to select. The rows that were selected beforehand are deselected.
  • The List Box (ListView or Table) control is a browsing control AND the StoredItem property is not empty.
    The Value property is used to identify the stored item for the record associated with the selected row. If no row is selected, the Value property returns an empty string ("").
    To find out the stored item associated with the selected row, use one of the following syntaxes:
    ResStoredItem = <Control name>.Value

    ResStoredItem = <Control name>.StoredItem
WEBDEV - Server code Reminder: the ListView control is not available for WEBDEV.
WEBDEV - Server codePHPAjax

Value of cell in a Table control

The Value property is used to determine or modify the value of a cell in a Table control.
<Result> is a character string.
To find out the value of a cell, use one of the following syntaxes:
ResCell = <Table control>[<Row number>][<Column number>].Value

ResCell = <Table control>[<Row number>][<Column number>]

ResCell = <Column>[<Row number>].Value

ResCell = <Column>[<Row number>]
Special case: Value of cell in the current row
If only the column name is specified, the Value property can be used to:
  • Find out the value of the cell identified by the specified column and by the current row in the Table control. If there is no current row, an empty string ("") is returned.
  • Modify the value of the cell identified by the specified column and by the current row in the Table control.
<Result> is a character string.
To find out the value of the cell identified by the specified column and by the current row in the Table control, use one of the following syntaxes:
ResColumn = <Column name>.Value

ResColumn = <Column name>
WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Value of Combo Box control

Two distinct cases may occur.
  • The Combo Box control is editable AND the StoredItem property corresponds to an empty string ("").
    The Value property is used to:
    • Find out the value of the selected item. If no element is selected, the Value property returns an empty string ("").
      To find out the value of the selected element, use one of the following syntaxes:
      ResValue = <Combo Box control>.Value

      ResValue = <Combo Box control>
    • Modify the value of the selected element.
  • The Combo Box is not editable OR StoredItem is not empty.
    The Value property is used to determine the number of the selected element.
    To find out the number of the selected element, use one of the following syntaxes:
    ResElement = <Combo Box control>.Value
    ResElement = <Combo Box control>[<Combo Box control>]
    ResElement = <Combo Box control>
WEBDEV - Browser code

Value of Tab control

The Value property is used to enable a pane in a Tab control or to determine the number of the active pane.
<Result> is an integer.
To find out the number of the active tab pane, use one of the following syntaxes:
ResPane = <Tab control>.Value

ResPane = <Tab control>
WEBDEV - Browser code The Value property is used to determine the number of the active pane in Browser code.
WEBDEV - Server codePHPAjax

Value of Chart control

The Value property can only be used to get the name of a Chart control.
<Result> is a character string.
To find out the name of a Chart control, use one of the following syntaxes:
Res_ChartName = <Chart control>.Value

Res_ChartName = <Chart control>
WEBDEV - Server codeWEBDEV - Browser code

Value of Rating control

The Value property is used to initialize and determine the value of a Rating control.
This value corresponds to the number of icons displayed in the control.
Example:
RATE_Nation1.Value = 4.5
WEBDEV - Browser code

Value of Drawer control

The Value property is used to determine if the Drawer control is expanded (1) or collapsed (0) and to switch between the two states.
Example:
// Collapses the Drawer control if it is expanded
IF DRW_Drawer1.Value = 1 THEN DRW_Drawer1.Value = 0
WEBDEV - Server codeAjax

Value of HTML control

The Value property is used to get the address associated with the HTML page displayed in the control. If the page:
  • is a page built in HTML directly, the value corresponds to "about:blank".
  • is a page from a site, the value corresponds to the address of the page (www.windev.com for example).
  • is an HTML file, the value corresponds to the address of the file.
Versions 17 and later
WEBDEV - Server codeWEBDEV - Browser code

Value of Map control

The Value property is used to center the map (in a Map control) on the position that corresponds to a geoPosition variable.
Example:
// Centers the map displayed by the "MAP_Position" control on a geographical position
MyPosition is geoPosition
 
MAP_Position.Value = MyPosition
Remarks:
  • The Value property is equivalent to the MapDisplayPosition function. The only difference is: when using MapDisplayPosition, the positioning on the requested position is performed via an animation.
  • WEBDEV - Server code The Value property can only be used to change the position in a Map control.
  • WEBDEV - Browser code The Value property is used to get and change the position in a Map control.
New in version 17
WEBDEV - Server codeWEBDEV - Browser code

Value of Map control

The Value property is used to center the map (in a Map control) on the position that corresponds to a geoPosition variable.
Example:
// Centers the map displayed by the "MAP_Position" control on a geographical position
MyPosition is geoPosition
 
MAP_Position.Value = MyPosition
Remarks:
  • The Value property is equivalent to the MapDisplayPosition function. The only difference is: when using MapDisplayPosition, the positioning on the requested position is performed via an animation.
  • WEBDEV - Server code The Value property can only be used to change the position in a Map control.
  • WEBDEV - Browser code The Value property is used to get and change the position in a Map control.
WEBDEV - Server codeWEBDEV - Browser code

Value of Map control

The Value property is used to center the map (in a Map control) on the position that corresponds to a geoPosition variable.
Example:
// Centers the map displayed by the "MAP_Position" control on a geographical position
MyPosition is geoPosition
 
MAP_Position.Value = MyPosition
Remarks:
  • The Value property is equivalent to the MapDisplayPosition function. The only difference is: when using MapDisplayPosition, the positioning on the requested position is performed via an animation.
  • WEBDEV - Server code The Value property can only be used to change the position in a Map control.
  • WEBDEV - Browser code The Value property is used to get and change the position in a Map control.
WEBDEV - Server codePHPAjax

Value of Site Map Path control

The Value property is used to get the index of the element in the Breadcrumb control the user has clicked on.
WEBDEV - Server codePHPAjax

Button, Link and iFrame: URL and Value properties

The URL and Value properties have the same effect on Button, Link and iFrame controls. These properties are used to find out the address associated with the control.
Versions 15 and later
WEBDEV - Server codeWEBDEV - Browser codeAjax

Upload control

The Value property is used to get the list of files selected in an Multifile Upload control. The names of files are separated by CR characters (Carriage Return). For a single-file Upload control, only the name of the selected file is returned.
WEBDEV - Server code The name of the files corresponds to the path and to the name of the temporary uploaded file. For example: C\WebDep\Temp\File.upl
This property must be used in the process for Receiving the uploaded files. In the other cases, this property returns an empty string ("").
This property is equivalent to Content in server code on the Upload control.
WEBDEV - Browser code The name of the files corresponds to the name of the file displayed on he browser. For example: MyImage.jpg
New in version 15
WEBDEV - Server codeWEBDEV - Browser codeAjax

Upload control

The Value property is used to get the list of files selected in an Multifile Upload control. The names of files are separated by CR characters (Carriage Return). For a single-file Upload control, only the name of the selected file is returned.
WEBDEV - Server code The name of the files corresponds to the path and to the name of the temporary uploaded file. For example: C\WebDep\Temp\File.upl
This property must be used in the process for Receiving the uploaded files. In the other cases, this property returns an empty string ("").
This property is equivalent to Content in server code on the Upload control.
WEBDEV - Browser code The name of the files corresponds to the name of the file displayed on he browser. For example: MyImage.jpg
WEBDEV - Server codeWEBDEV - Browser codeAjax

Upload control

The Value property is used to get the list of files selected in an Multifile Upload control. The names of files are separated by CR characters (Carriage Return). For a single-file Upload control, only the name of the selected file is returned.
WEBDEV - Server code The name of the files corresponds to the path and to the name of the temporary uploaded file. For example: C\WebDep\Temp\File.upl
This property must be used in the process for Receiving the uploaded files. In the other cases, this property returns an empty string ("").
This property is equivalent to Content in server code on the Upload control.
WEBDEV - Browser code The name of the files corresponds to the name of the file displayed on he browser. For example: MyImage.jpg
Versions 18 and later

WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Range Slider control

The Value property is used to get and change the lower bound of the currently selected interval in a Range Slider control. In this case, this property is equivalent to the LowerValue property.
The same rules apply.
New in version 18

WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Range Slider control

The Value property is used to get and change the lower bound of the currently selected interval in a Range Slider control. In this case, this property is equivalent to the LowerValue property.
The same rules apply.

WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Range Slider control

The Value property is used to get and change the lower bound of the currently selected interval in a Range Slider control. In this case, this property is equivalent to the LowerValue property.
The same rules apply.
Versions 22 and later

WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Value of Sliding Banner control

The Value property is used to:
  • find out the number of the plane displayed in a Sliding Banner control.
  • display a specific plane in a Sliding Banner control.
<Result> is an integer.
To find out the number of the plane displayed in a Sliding Banner control, use one of the following syntaxes:
ResPlane = <Sliding Banner control>.Value

ResPlane = <Sliding Banner control>
New in version 22

WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Value of Sliding Banner control

The Value property is used to:
  • find out the number of the plane displayed in a Sliding Banner control.
  • display a specific plane in a Sliding Banner control.
<Result> is an integer.
To find out the number of the plane displayed in a Sliding Banner control, use one of the following syntaxes:
ResPlane = <Sliding Banner control>.Value

ResPlane = <Sliding Banner control>

WEBDEV - Server codeWEBDEV - Browser codePHPAjax

Value of Sliding Banner control

The Value property is used to:
  • find out the number of the plane displayed in a Sliding Banner control.
  • display a specific plane in a Sliding Banner control.
<Result> is an integer.
To find out the number of the plane displayed in a Sliding Banner control, use one of the following syntaxes:
ResPlane = <Sliding Banner control>.Value

ResPlane = <Sliding Banner control>

Limitations

WEBDEV - Server code In a report, the Value property cannot be used on:
  • a report.
  • a report block.
  • a Check Box control.
  • a Shape control.
  • an Organizer control.
  • a Scheduler control.
  • a Gantt Chart control.
  • Versions 21 and later
    a Signature control.
    New in version 21
    a Signature control.
    a Signature control.
WEBDEV - Server codeWEBDEV - Browser code The Value property cannot be used on:
  • an option in a radio button,
  • a group of controls.
WEBDEV - Browser code The Value property works only on the following controls:
  • Static control.
  • Formatted display control.
  • Button control.
  • Edit control,
  • List Box control.
  • Combo Box,
  • Check Box control.
  • Radio Button control.
  • Thumbnail control.
  • iframe control.
  • Drawer control.
  • Tab control.
  • Versions 15 and later
    Upload control (single-selection and multi-selection).
    New in version 15
    Upload control (single-selection and multi-selection).
    Upload control (single-selection and multi-selection).
  • Versions 16 and later
    Progress Bar control.
    New in version 16
    Progress Bar control.
    Progress Bar control.
  • Versions 16 and later
    Scheduler control.
    New in version 16
    Scheduler control.
    Scheduler control.
  • Versions 18 and later
    Slider control (linear slider and range slider).
    New in version 18
    Slider control (linear slider and range slider).
    Slider control (linear slider and range slider).
  • Versions 22 and later
    Sliding Banner control.
    New in version 22
    Sliding Banner control.
    Sliding Banner control.
Minimum version required
  • Version 9
This page is also available for…
Comments
Click [Add] to post a comment