PC SOFT

ONLINE HELP
 WINDEVWEBDEV AND WINDEV MOBILE

Home | Sign in | English EN

  • Plane and window
  • Plane and internal window
  • Plane and internal report
  • Limits
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac CatalystUniversal Windows 10 App
Others
Stored procedures
Plane is used to:
  • Find out the active plane of a window (or report) or the plane to which a control belongs.
  • Modify the active plane of a window (or report) or associate a control with another plane.
Remarks:
  • A plane is a "layer":
    • of a window,
    • Versions 19 and later
      of a report.
      New in version 19
      of a report.
      of a report.
    Several planes cannot be viewed at the same time (in the window editor, page editor, report editor, or in your applications).
  • In a window or in a report, each control can:
    • belong to no plane. This control will always be displayed, regardless of the current plane.
    • belong to a plane. This control will be displayed when the corresponding plane is visible.
    • Versions 19 and later
      belong to several planes. This control will be displayed when one of the planes associated with the control is enabled (which means visible).
      New in version 19
      belong to several planes. This control will be displayed when one of the planes associated with the control is enabled (which means visible).
      belong to several planes. This control will be displayed when one of the planes associated with the control is enabled (which means visible).
  • Versions 19 and later
    The planes in the reports are mainly used to replace the substitution blocks: simply position the controls on several planes and enable the desired plane when print.
    New in version 19
    The planes in the reports are mainly used to replace the substitution blocks: simply position the controls on several planes and enable the desired plane when print.
    The planes in the reports are mainly used to replace the substitution blocks: simply position the controls on several planes and enable the desired plane when print.
Versions 15 and later
Android This property is now available for Android applications.
New in version 15
Android This property is now available for Android applications.
Android This property is now available for Android applications.
Versions 17 and later
iPhone/iPad This property is now available for iPhone/iPad applications.
New in version 17
iPhone/iPad This property is now available for iPhone/iPad applications.
iPhone/iPad This property is now available for iPhone/iPad applications.
Versions 18 and later
Android Widget This property is now available in Android Widget mode.
New in version 18
Android Widget This property is now available in Android Widget mode.
Android Widget This property is now available in Android Widget mode.
Versions 19 and later
iPhone/iPad This property is now available for reports and report controls.
New in version 19
iPhone/iPad This property is now available for reports and report controls.
iPhone/iPad This property is now available for reports and report controls.
Versions 21 and later
Universal Windows 10 App This property is now available in Universal Windows 10 App mode.
New in version 21
Universal Windows 10 App This property is now available in Universal Windows 10 App mode.
Universal Windows 10 App This property is now available in Universal Windows 10 App mode.
Example
Universal Windows 10 AppAndroidAndroid Widget iPhone/iPadIOS Widget
// Modify the active plane
WIN_EditWindow.Plane = 2
Syntax

Finding out the active plane of a window (or report) or the plane to which a control belongs Hide the details

<Plane number> = <Element used>.Plane
<Plane number>: Integer or character string
  • Number of the active plane in the specified window.
  • Versions 19 and later
    Number of the active plane in the specified report.
    New in version 19
    Number of the active plane in the specified report.
    Number of the active plane in the specified report.
  • Number of the plane to which the specified control belongs.
  • Versions 19 and later
    Numbers of the planes (separated by a comma) to which the control belongs.
    New in version 19
    Numbers of the planes (separated by a comma) to which the control belongs.
    Numbers of the planes (separated by a comma) to which the control belongs.
<Element used>: Name of control, window or report
Name of the element to be used:
  • Control name.
  • Window name.
  • Versions 19 and later
    Report name.
    New in version 19
    Report name.
    Report name.

Modifying the active plane of a window (or report) or associating a control with another plane Hide the details

<Element used>.Plane = <New plane>
<Element used>: Name of control, window or report
Name of the element to be used:
  • Control name.
  • Window name.
  • Versions 19 and later
    Report name.
    New in version 19
    Report name.
    Report name.
<New plane>: Integer or character string
  • Number of the plane to activate. If this number is greater than the number of existing planes, only the controls not assigned to a plane will be displayed.
  • Number of the plane associated with the specified control. The control will no longer be displayed if this number does not correspond to the current plane.
  • Versions 19 and later
    Numbers of the planes associated with the control. These numbers are supplied in character string format and they are separated by a comma.
    New in version 19
    Numbers of the planes associated with the control. These numbers are supplied in character string format and they are separated by a comma.
    Numbers of the planes associated with the control. These numbers are supplied in character string format and they are separated by a comma.
  • Versions 23 and later
    WINDEV Mobile Number of the plane to activate (for the windows only). The plane name was defined in the plane management window in the window editor.
    New in version 23
    WINDEV Mobile Number of the plane to activate (for the windows only). The plane name was defined in the plane management window in the window editor.
    WINDEV Mobile Number of the plane to activate (for the windows only). The plane name was defined in the plane management window in the window editor.
Remarks
Universal Windows 10 AppAndroidAndroid Widget iPhone/iPadIOS Widget

Plane and window

  • If a control is assigned to no plane (<None> selected in the description window), this control will always be displayed, regardless of the active plane in the window or report.
  • If a control is assigned to a plane, this control will be displayed only if it belongs to the active plane in the window or report.
  • Versions 19 and later
    If a control is assigned to several planes, this control will be displayed as soon as one of these planes is enabled (which means visible).
    New in version 19
    If a control is assigned to several planes, this control will be displayed as soon as one of these planes is enabled (which means visible).
    If a control is assigned to several planes, this control will be displayed as soon as one of these planes is enabled (which means visible).
  • When opening a window or report, the active plane is plane #0.
Android

Plane and internal window

When the Plane property is used directly on an internal window, it applies to the controls in the internal window. For example, to display the plane 2 of the internal window from the host window or directly in the internal window, use the following code line:
<Name of internal window>.Plane = 2
If the Plane property is used on the host window of the internal window, this property will only apply to all controls in the host window (including the Internal Window control if it is associated with a plane).
Versions 19 and later

Plane and internal report

When the Plane property is used directly on the internal report, it applies to the controls in this report. For example, to display the plane 2 of the internal report from the host report or directly in the internal report, use the following code line:
<Name of internal report>.Plane = 2
When the Plane property is used on the host report of the internal report, it applies to all the controls in the host report (including the internal report control if it is associated with a plane).
New in version 19

Plane and internal report

When the Plane property is used directly on the internal report, it applies to the controls in this report. For example, to display the plane 2 of the internal report from the host report or directly in the internal report, use the following code line:
<Name of internal report>.Plane = 2
When the Plane property is used on the host report of the internal report, it applies to all the controls in the host report (including the internal report control if it is associated with a plane).

Plane and internal report

When the Plane property is used directly on the internal report, it applies to the controls in this report. For example, to display the plane 2 of the internal report from the host report or directly in the internal report, use the following code line:
<Name of internal report>.Plane = 2
When the Plane property is used on the host report of the internal report, it applies to all the controls in the host report (including the internal report control if it is associated with a plane).

Limits

The Plane property cannot be used on:
  • an option in a Check Box or Radio Button control,
  • a row in a Table, List Box or Combo Box control,
  • a cell in a Table control,
  • a column in Table control,
  • a window menu,
  • a tab pane,
  • a group of controls,
Android Widget The Plane property applies only to the following elements:
  • Button control.
  • Static control.
  • Image control.
  • Window.
Versions 19 and later
Universal Windows 10 AppiPhone/iPadIOS Widget The Plane property is not available for reports.
New in version 19
Universal Windows 10 AppiPhone/iPadIOS Widget The Plane property is not available for reports.
Universal Windows 10 AppiPhone/iPadIOS Widget The Plane property is not available for reports.
Minimum version required
  • Version 9
This page is also available for…
Comments
Video Planos
https://youtu.be/2hg0knDbAAc

https://windevdesenvolvimento.blogspot.com/2019/08/dicas-2229-windev-webdev-mobile-24.html
amarildo
04 Aug. 2019