PC SOFT

WINDEVWEBDEV AND WINDEV MOBILE
ONLINE HELP

Home | Sign in | English UK

  • Plane and window
  • Plane and internal window
  • Plane and internal report
  • Limits
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
..Plane is used to:
  • Find out the active plane of a window (or report) or the plane to which a control belongs.
  • Modify the active plane of a window (or report) or associate a control with another plane.
Remarks:
  • A plane is a "layer":
    • of a window,
    • Versions 19 and later
      of a report.
      New in version 19
      of a report.
      of a report.
    Several planes cannot be viewed at the same time (in the window editor, page editor, report editor, or in your applications).
  • In a window or in a report, each control can:
    • belong to no plane. This control will always be displayed, regardless of the current plane.
    • belong to a plane. This control will be displayed when the corresponding plane is visible.
    • Versions 19 and later
      belong to several planes. This control will be displayed when one of the planes associated with the control is enabled (which means visible).
      New in version 19
      belong to several planes. This control will be displayed when one of the planes associated with the control is enabled (which means visible).
      belong to several planes. This control will be displayed when one of the planes associated with the control is enabled (which means visible).
  • Versions 19 and later
    The planes in the reports are mainly used to replace the substitution blocks: all you have to do is position the controls on several planes and enable the requested plane during the print.
    New in version 19
    The planes in the reports are mainly used to replace the substitution blocks: all you have to do is position the controls on several planes and enable the requested plane during the print.
    The planes in the reports are mainly used to replace the substitution blocks: all you have to do is position the controls on several planes and enable the requested plane during the print.
Versions 18 and later
Universal Windows 10 App This property is now available in Windows Store apps mode.
New in version 18
Universal Windows 10 App This property is now available in Windows Store apps mode.
Universal Windows 10 App This property is now available in Windows Store apps mode.
Versions 19 and later
WINDEV This property is now available for the report and for the report controls.
Universal Windows 10 App This property is now available for Windows Phone applications.
New in version 19
WINDEV This property is now available for the report and for the report controls.
Universal Windows 10 App This property is now available for Windows Phone applications.
WINDEV This property is now available for the report and for the report controls.
Universal Windows 10 App This property is now available for Windows Phone applications.
Versions 21 and later
Universal Windows 10 App This property is now available in Universal Windows 10 App mode.
New in version 21
Universal Windows 10 App This property is now available in Universal Windows 10 App mode.
Universal Windows 10 App This property is now available in Universal Windows 10 App mode.
Versions 22 and later
Windows This property is now available in the WEBDEV sites.
New in version 22
Windows This property is now available in the WEBDEV sites.
Windows This property is now available in the WEBDEV sites.
Example
WINDEVUniversal Windows 10 AppJava
// Modify the active plane
WIN_EditWindow..Plane = 2
Syntax

Finding out the active plane of a window (or report) or the plane to which a control belongs Hide the details

<Plane Number> = <Object name>..Plane
<Plane Number>: Integer or character string
  • Number of the active plane in the specified window.
  • Versions 19 and later
    Number of the active plane in the specified report.
    New in version 19
    Number of the active plane in the specified report.
    Number of the active plane in the specified report.
  • Number of the plane to which the specified control belongs.
  • Versions 19 and later
    Numbers of the planes (separated by a comma) to which the control belongs.
    New in version 19
    Numbers of the planes (separated by a comma) to which the control belongs.
    Numbers of the planes (separated by a comma) to which the control belongs.
<Object name>: Character string (with or without quotes)
Name of object to use:
  • Control name.
  • Window name.
  • Versions 19 and later
    Name of report.
    New in version 19
    Name of report.
    Name of report.

Modifying the active plane of a window (or report) or associating a control with another plane Hide the details

<Object name>..Plane = <New Plane>
<Object name>: Character string (with or without quotes)
Name of object to use:
  • Control name.
  • Window name.
  • Versions 19 and later
    Name of report.
    New in version 19
    Name of report.
    Name of report.
<New Plane>: Integer or character string
  • Number of the plane to activate. If this number is greater than the number of existing planes, only the controls not assigned to a plane will be displayed.
  • Number of the plane associated with the specified control. The control will no longer be displayed if this number does not correspond to the current plane.
  • Versions 19 and later
    Numbers of the planes associated with the control. These numbers are supplied in character string format and they are separated by a comma.
    New in version 19
    Numbers of the planes associated with the control. These numbers are supplied in character string format and they are separated by a comma.
    Numbers of the planes associated with the control. These numbers are supplied in character string format and they are separated by a comma.
  • Versions 23 and later
    WINDEV Number of the plane to activate (for the windows only). The plane name was defined in the window for plane management in the window editor.
    New in version 23
    WINDEV Number of the plane to activate (for the windows only). The plane name was defined in the window for plane management in the window editor.
    WINDEV Number of the plane to activate (for the windows only). The plane name was defined in the window for plane management in the window editor.
Remarks
WINDEVUniversal Windows 10 AppJava

Plane and window

  • If a control is assigned to no plane (<None> selected in the description window), this control will always be displayed, regardless of the active plane in the window or report.
  • If a control is assigned to a plane, this control will be displayed only if it belongs to the active plane in the window or report.
  • Versions 19 and later
    If a control is assigned to several planes, this control will be displayed as soon as one of these planes is enabled (which means visible).
    New in version 19
    If a control is assigned to several planes, this control will be displayed as soon as one of these planes is enabled (which means visible).
    If a control is assigned to several planes, this control will be displayed as soon as one of these planes is enabled (which means visible).
  • When opening a window or report, the active plane is plane #0.
WINDEV

Plane and internal window

When ..Plane is used directly on an internal window, this property applies to the controls found in the internal window. For example, to display the plane 2 of the internal window from the host window or directly in the internal window, use the following code line:
<Name of Internal Window>..Plane = 2
When ..Plane is used on the host window of an internal window, this property applies to all the controls found in the host window (including the internal window control if it is associated with a plane).
Versions 19 and later

Plane and internal report

When ..Plane is used directly on the internal report, this property applies to the controls found in the internal report. For example, to display the plane 2 of the internal report from the host report or directly in the internal report, use the following code line:
<Name of Internal Report>..Plane = 2
When ..Plane is used on the host report of the internal report, this property applies to all the controls found in the host report (including the internal report control if it is associated with a plane).
New in version 19

Plane and internal report

When ..Plane is used directly on the internal report, this property applies to the controls found in the internal report. For example, to display the plane 2 of the internal report from the host report or directly in the internal report, use the following code line:
<Name of Internal Report>..Plane = 2
When ..Plane is used on the host report of the internal report, this property applies to all the controls found in the host report (including the internal report control if it is associated with a plane).

Plane and internal report

When ..Plane is used directly on the internal report, this property applies to the controls found in the internal report. For example, to display the plane 2 of the internal report from the host report or directly in the internal report, use the following code line:
<Name of Internal Report>..Plane = 2
When ..Plane is used on the host report of the internal report, this property applies to all the controls found in the host report (including the internal report control if it is associated with a plane).

Limits

..Plane cannot be used on:
  • an option in a Check Box or Radio Button control,
  • a row in a Table, List Box or Combo Box control,
  • a cell in a Table control,
  • a column in Table control,
  • a window menu,
  • a tab pane,
  • a group of controls,
Java ..Plane only applies to the following elements:
  • Button control.
  • Static control.
  • Edit control.
  • Image control.
  • Check Box control.
  • Radio Button control.
  • List Box control.
  • Combo Box control.
  • TreeView control.
  • Tab control.
  • Window control.
  • Table control.
  • Supercontrol control.
Versions 19 and later
Universal Windows 10 App ..Plane is not available for the reports.
New in version 19
Universal Windows 10 App ..Plane is not available for the reports.
Universal Windows 10 App ..Plane is not available for the reports.
Minimum version required
  • Version 9
This page is also available for…
Comments
Video Planos
https://youtu.be/2hg0knDbAAc

https://windevdesenvolvimento.blogspot.com/2019/08/dicas-2229-windev-webdev-mobile-24.html
amarildo
04 Aug. 2019