|
|
|
|
|
- Overview
- Parameters specific to the SNMP check
- Information about the SNMP agent
- Information about the OID to check
The monitoring robot will read the value of the specified OID and compare its value with the reference value. The check will be: - successful if the value of the OID was read and if it corresponds to the reference value.
- unsuccessful otherwise.
Parameters specific to the SNMP check Information about the SNMP agent To perform an SNMP check, specify: - the address of the SNMP agent to use,
- the community of the agent.
Information about the OID to check To perform an SNMP check, specify: - the preset OID if it exists,
- the test conditions of the value.
Remark: To add a preset OID: - Enter its name ("Preset OIDs" control).
- Enter its value ("OID to read" control).
- Click the "+" button.
This page is also available for…
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|