Home | Sign in | English EN
  • Correspondence between tags and constants
  • Managing errors
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WindowsLinuxPHPWEBDEV - Browser code
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Stored procedures
ImageInfoList (Function)
In french: ImageInfoListe
Returns the list of Exif tags available for the image used.
Remark: The Exif (EXchangeable Image File) information is included in the image file. This standard defines a set of tags used to store information about the image: date, width, orientation, camera model, shutter speed, distance, exposure time, ...
TagList is string
MyTag is int
i is int = 1
// Retrieve the available tags for
// the JPEG image displayed in the "IMG_MyImageControl" control
TagList = ImageInfoList(IMG_MyImageControl)
WHILE ExtractString(TagList, i, CR) <> EOT
// Retrieve each tag
MyTag = ExtractString(TagList, i, CR)
// Add the tag and its value into TABLE_MyTable
TableAddLine(TABLE_MyTable, MyTag, ...
ImageInfoValue(IMG_MyImageControl, MyTag))
i ++
<Result> = ImageInfoList(<Image>)
<Result>: Character string
List of Exif tags available for the image used. Each tab corresponds to an integer and is separated by a RC character (Carriage Return).
<Image>: Character string (with or without quotes)
Image to use. This image can correspond to:
  • an image file (JPEG or TIFF format): specify the name and the full (or relative) path of the file. A UNC path can be used.
    In this case, the file must be closed by ImageInfoClose.
  • an image (JPEG or TIFF format) displayed in an Image control: specify the name of the Image control.
  • an image (JPEG or TIFF format) found in an image memo: specify this image memo.
  • an image (JPEG or TIFF format) found in a binary string: specify this binary string.

Correspondence between tags and constants

The table below presents the correspondence between tags and WLanguage constants. These tags and constants can be passed in parameter to ImageInfoValue to find out the value of the tag.
TagWLanguage constant Value
37510imgCommentCharacter string
Comments about the image
Compression of the image in bits/pixel
33432imgCopyrightCharacter string
Copyright of the image
Date and time of the image in YYYY:MM:DD HH:MM:SS format
270imgDescriptionCharacter string
Image description
Distance from the subject in meters
Exposure bias in APEX
Status of the flash during the shot:
  • 0: Flash off.
  • 1: Flash on.
  • 5: Flash on and light not detected.
  • 7: Flash on and light detected.
Height of image in pixels
Width of image in pixels
305imgRecordingSoftwareCharacter string
Name of the software that was used to record the image
Focal length in millimeters
Brightness of the image in APEX
271imgDeviceMarkCharacter string
Mark of the camera that took the photo
272imgDeviceModelCharacter string
Model of camera that took the photo
Metering mode:
  • 0: unknown.
  • 1: average.
  • 2: average centered.
  • 3: dot.
  • 4: multidot.
  • 5: pattern.
  • 6: partial.
  • 7 to 254: reserved.
  • 255: other.
37500imgManufacturerNoteCharacter string
Name of the camera manufacturer
Orientation of the image:
  • 1 to 4: landscape.
  • 5 to 8: portrait.
Aperture in APEX
Maximum aperture in APEX
Exposure mode used during the shot:
  • 0: undefined.
  • 1: manual.
  • 2: normal.
  • 3: priority to aperture.
  • 4: priority to speed.
  • 5: creation.
  • 6: action.
  • 7: portrait with no background.
  • 8: landscape.
  • 9 to 255: others.
Horizontal resolution of the image
Vertical resolution of the image
Light source for the image:
  • 0: unknown.
  • 1: daylight.
  • 2: fluorescent.
  • 3: tungsten.
  • 17: standard light A.
  • 18: standard light B.
  • 19: standard light C.
  • 20: D55.
  • 21: D65.
  • 22: D75.
  • 23 to 254: reserved.
  • 255: other.
Exposure time
Unit for the horizontal and vertical resolution of the image:
  • 2: inches.
  • 3: centimeters.
36864imgEXIFVersionCharacter string
Version of Exif information
65536imgThumbnailBinary string
Thumbnail corresponding to the image
Shutter speed in APEX
Other tags are also available. These unlisted tags are specific to some types of cameras or correspond to custom tags.

Managing errors

ImageInfoList returns no error code. To find out whether an error was generated by this function, use the ErrorOccurred variable. If an error occurs, you can get the details of the error with ErrorInfo.
Related Examples:
The EXIF functions Unit examples (WINDEV): The EXIF functions
[ + ] Using the ImageXXX functions.
These functions are used to access the EXIF information of an image.
The EXIF information is included in the JPEG or TIFF images.
It can be for example the snapshot date, the orientation of the device when taking the photo, the make and model of the camera, a miniature of the image...
Component: wd260img.dll
See also
Minimum version required
  • Version 10
This page is also available for…
Click [Add] to post a comment