|
|
|
|
|
|
|
|
|
|
- Lightness of black color
- Miscellaneous
iBorder (Function) In french: iCadre Prints a border at specified coordinates. Remark: The origin (0,0) is located in the top left-hand corner of the sheet.. It takes the physical margins of the printer into account.
iPrint(iXPos(50) + CU.CUSTNAME)
// Encloses the text in a line equal to 2 Pica point
// The border background is 50% gray
iBorder(0, 0, iPageWidth(), 10, 2, 50)
Syntax
iBorder(<X1> , <Y1> , <X2> , <Y2> [, <Thickness> [, <Fill> [, <Color> [, <Line> [, <Brush> [, <Border>]]]]]])
<X1>: Real Horizontal coordinate of the upper-left corner of the border (in millimeters). This corner defines the external side of the border.
Value between 0 and the page width (returned by iPageWidth). <Y1>: Real Vertical coordinate of the upper-left corner of the border (in millimeters). This corner defines the external side of the border.
Value between 0 and the page height (returned by iPageHeight). <X2>: Real Horizontal coordinate of the lower-right corner of the border (in millimeters). This corner defines the external side of the border.
Value between 0 and the page width (returned by iPageWidth). <Y2>: Real Vertical coordinate of the lower-right corner of the border (in millimeters). This corner defines the external side of the border.
Value between 0 and the page height (returned by iPageHeight). <Thickness>: Optional real Thickness of border line (in picas). Default value = 1 (one Pica = 0.353 mm).
Attention: Depending on the value of this parameter, the thickness is obtained by adding several lines side by side from outside to inside..
<Fill>: Optional integer (included between 1 and 200) Rate for the line color and for the background color. If this parameter is:- Equal to 0 (default): no filling.
- Equal to 100: full filling with the specified color.
- Less than 100: the closer this parameter is to 0, the lighter the color.
- Greater than 100: the closer this parameter gets to 200 the darker the color is.
<Color>: Optional integer Color used for the background and for the border. If this parameter is not specified, the color used is black.
This color can correspond to: <Line>: Optional integer constant Type of line.
| | iContinuous
(Default value) | Solid line | | iDashed | Dashed line (-----) | | iDotAndDash | Dot-and-dash line (-.-.) | | iDotted | Dotted line (....) |
<Brush>: Optional integer constant Pattern used to fill the border.
| | | iCrossed | Crossed lines. | | iDiagonalCrossed | Diagonal crossed lines. | | iDownwardDiagonal | Descending diagonal lines. | | iHorizontal | Horizontal lines. | iSolid
(default value) | Entire fill. | | iUpwardDiagonal | Ascending diagonal lines. | | iVertical | Vertical lines |
<Border>: Optional integer constant Sides of the border to draw:
| | iBorderAll
(Default value) | All the border sides are drawn | | iBorderBottom | The bottom side is drawn. | | iBorderLeft | The left side is drawn | | iBorderNone | The border has no side | | iBorderRight | The right side is drawn | | iBorderTop | The top side is drawn |
Remarks For the black color, the rate corresponds to a rate of gray whose values are included between 1 (white) and 100 (solid black). In this case, the values greater than 100 will be processed like the value 100. - The cursor position is not modified when the outline is drawn.
- The dotted type (iDotted) or the mixed type (iDotAndDash) combined with a thick border may produce unpleasant effects.
This page is also available for…
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|