ONLINE HELP
 WINDEVWEBDEV AND WINDEV MOBILE

This content has been translated automatically.  Click here  to view the French version.
Help / Environment / Installing WINDEV, WEBDEV, WINDEV Mobile
  • Overview
  • Required configuration
  • Configuration required for installing WINDEV
  • Configuration required to install WEBDEV
  • Configuration required for installing WINDEV Mobile
  • Setup
  • Configuring the Web servers
  • Register
  • Electronic key (used by the historical version)
  • Compatibility with the earlier versions
WINDEV
WindowsLinuxJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac Catalyst
Others
Stored procedures
Overview
This page describes the configuration required to install WINDEV, WEBDEV or WINDEV Mobile, as well as the different installation steps.
Please note: To install WINDEV, WEBDEV or WINDEV Mobile, you need to be logged in as administrator of the workstation.
Required configuration
WINDEV

Configuration required for installing WINDEV

We will distinguish between the configuration of the development computer (your computer) and the configuration required for the applications developed by WINDEV to operate (the end-user computers).
Development computer:
  • Screen: minimum size: 1920 x 1080
  • 8 GB of RAM (16 GB or more recommended).
  • 20 GB of disk space.
  • running Windows 10 or later.
  • Please note: To install WINDEV, you must be logged in as administrator of the workstation..
User computer:
  • 2 GB of RAM.
  • running Windows Vista or 7 (32 or 64-bit) or later. An SSE2 processor is required.
    Please note: to use the Map control, you must have at least Windows 10 installed on your computer.
It is important to note that the source code of WINDEV applications is identical whatever the version of Windows under which the programs will run.
Note When the screen resolution of a development station is high, the font size of WINDEV editors may not be large enough for comfortable reading. This is the case on a Macbook retina in 2 560 x 1 600 or on the Windows computers in 3 000 x 1 800. To increase the size of all the fonts:
  1. Open the WINDEV general options ("Options" tab, "Home" group, "Environment").
  2. Go to the "General" tab.
  3. In "DPI management", select "Let Windows manage DPI".
  4. The DPI settings will be applied next time WINDEV Mobile is started.
For more details, see WINDEV options.
WEBDEV - Server code

Configuration required to install WEBDEV

We will distinguish between the configuration of the development computer (your computer), the configuration required to host your sites (the computer of your hosting provider) and the configuration required for using the sites developed in WEBDEV (the computers of the Web users).
Development computer:
  • Screen: minimum size: 1920 x 1080
  • 8 GB of main memory (16 GB or more recommended).
  • 20 GB of disk space.
  • running Windows 10 or later.
    Note: If WEBDEV is used in a virtual machine, hardware acceleration must not be enabled..
  • Please note: To install WEBDEV, you must be logged in as administrator of the workstation..
Host computer:
  • Server 16 GB of RAM.
  • System:
    • Minimum version: Windows 2016 and higher
    • Recommended version: Windows Server 2016 edition (standard or datacenter) and higher.
  • SSE4.1 and later processors.
  • Web server (see "Configuring the Web servers").
It is important to note that the source code of WEBDEV applications or sites is identical whatever the version of Windows under which the programs will run.
Internet user station: standard Internet browser:
  • Edge 16 (or later),
  • Chrome 57 (or later),
  • Firefox 53 (or later).
Note When the screen resolution of a development station is high, the font size of WEBDEV editors may not be large enough for comfortable reading. This is the case on a Macbook retina in 2 560 x 1 600 or on the Windows computers in 3 000 x 1 800. To increase the size of all the fonts:
  1. Open the WEBDEV general options ("Home" tab, "Environment" group, "Options").
  2. Go to the "General" tab.
  3. In "DPI management", select "Let Windows manage DPI".
  4. The DPI settings will be applied next time WINDEV Mobile is started.
For more details, see WEBDEV options.
WINDEV Mobile

Configuration required for installing WINDEV Mobile

We will distinguish between the configuration of the development computer (your computer) and the configuration required for the applications developed by WINDEV Mobile to operate (the end-user computers).
Development computer:
  • Screen: minimum size: 1920 x 1080
  • 8 GB of main memory (16 GB or more recommended).
  • 20 GB of disk space.
  • running Windows 10 or later.
  • Warning: To install WINDEV Mobile, you must be logged in as administrator of the workstation.
Note When the screen resolution of a development station is high, the font size of WINDEV Mobile editors may not be large enough for comfortable reading. This is the case on a Macbook retina in 2 560 x 1 600 or on the Windows computers in 3 000 x 1 800. To increase the size of all the fonts:
  1. Open the WINDEV Mobile general options ("Home" tab, "Environment" group, "Options").
  2. Go to the "General" tab.
  3. In "DPI management", select "Let Windows manage DPI".
  4. The DPI settings will be applied next time WINDEV Mobile is started.
For more details, see Options of WINDEV Mobile.
Mobile device:
  • equipped with ARM or ARM-compatible processors (XScale, Samsung, etc.), X86 or X86-compatible processors (Intel Transmeta, Geode, etc.) with 64 MB of main memory.
  • in Android.
  • in iOS.
It's important to note that the source code of WINDEV Mobile applications is identical whatever the version of Android or iOS under which the programs will run.
Remarks:
  • Windows Mobile, Windows CE and Windows Embedded are no longer supported by Microsoft, but are still used in the industrial field.
    To continue developing for Windows Mobile, you must use version 26. Version 2025 gives you access to version 26, which can be downloaded as a SaaS version here or purchased as a dongle-based version here.
  • The "Universal Windows 10 App" platform are no longer supported in WINDEV, WEBDEV and WINDEV Mobile.
    To continue developing an application in Universal Windows 10 App mode, use version 2024. Version 2025 gives you access to version 2024, which can be downloaded as a SaaS version here or purchased as a dongle-based version here.
Setup
The setup is very easy, simply follow the instructions included with the installation package.
WEBDEV and WINDEV Mobile can be installed in stand-alone mode, or integrated with WINDEV if it has been installed before. 64-bit and 32-bit versions of WEBDEV and WINDEV Mobile can be integrated with WINDEV.
To make things easier, the setup procedure automatically creates the "WINDEV", "WEBDEV" or "WINDEV Mobile" program group in "Start .. Programs" and installs the necessary files.
The WINDEV, WEBDEV and WINDEV Mobile setup wizard proposes to help improve the product by allowing the collection of information on how the product is used. This optional and anonymous data collection allows PC SOFT to improve its products.
WEBDEV - Server code

Configuring the Web servers

When installing WEBDEV, the following servers are automatically configured for WEBDEV:
Web server
Details
IIS 8 and laterMicrosoft Internet Information Server version 8 (and later).
Microsoft server provided with Windows 10.
ApacheVersion 2.2, 2.4
Free Web server supplied by the Apache Group.

Note: If your Web server does not appear in this list, manual configuration is required.
Register
IMPORTANT: return your completed registration card today.
The registration card supplied with your product is very important. It will make you eligible for the free services PC Soft offers to its customers: Free Technical Support (for a set number of inquiries), information about new features, ability to update your product, ...
You also have the ability to register via Internet directly:
  1. Start the desired IDE.
  2. On the "Home" tab, in the "Online help" group, expand "Help" and select "Register product".
Electronic key (used by the historical version)
The dongle supplied with your product is specific to the development environment.
This dongle is not required for the end users or for the hosting provider of your Internet sites.
The principle is simple, the dongle must be plugged in when the product is used. This key can be a USB key or a network key).
For the USB key, plug it into an available USB port and start WINDEV, WEBDEV or WINDEV Mobile.
Note: If the key doesn't light up or flashes, consult the following FAQ: Installing the driver required to recognize the dongle of WINDEV, WEBDEV or WINDEV MOBILE.
If you use the SaaS version, the electronic key is no longer required.
Compatibility with the earlier versions
As for all the PC SOFT products, we guarantee backward compatibility with the earlier version.
To migrate the projects created with an earlier version, see the online help.
Minimum version required
  • Version 9
This page is also available for…
Comments
Click [Add] to post a comment

Last update: 05/24/2025

Send a report | Local help