- Selection mode ("UI" tab of the description window)
- Selection modes
- Display mode ("Details" tab of the description window)
- The different available modes
- Standard vertical mode or column gallery mode: Column anchoring
- Resizing the cells of a Looper control
- Other settings in the "Details" tab
- Input settings
- Movements and gestures
- Search control
- When a Looper control is populated programmatically
- Different content in each row ("Content" tab)
- Characteristics of internal windows
Characteristics of a Looper control in a window
To view the characteristics of the control, select "Description" in the context menu. In a window, the attributes not being proposed by default, only the characteristics of the Looper control will be displayed.
The main control characteristics are grouped in the following tabs:
- The "General" tab displays the list of controls found in the Looper control.
- In the "UI" tab, you can select:
- In the "Details" tab, you can select:
- In the "Content" tab, you can define:
- The "Style" tab allows you to define the style of the different control elements.
Selection mode ("UI" tab of the description window)
The following selection modes are available in a Looper control:
- No selection: The selection bar is not displayed on the selected row. However, the "Select a row" event in run when the row is selected.
- Single selection: The selection bar is displayed on the selected row. The code in the "Select a row" event is run.
- Multi-selection: The selection bar is displayed on the selected rows. To select several rows, hold the Shift or Ctrl key down. The "Select a row" event is run whenever a row is selected.
- Multiple selection via a single click: This option is used to perform a multi-selection with the mouse. If this option is selected, all you have to do is click a row in order for this row to be added to the multi-selection or removed from the multi-selection.
- Android/iOS selection mode: This option hides the selection bar after the selection. This allows you to get the standard operating mode on these platforms: the bar appears only when the row is clicked. Then, the row selection code is executed.
Display mode ("Details" tab of the description window)
The different available modes
Several display modes are available:
- Standard (grid): Display mode of standard Looper controls. In this case, the Looper control can be horizontal or vertical.
- Gallery in rows: Display mode corresponding to the Gallery control in rows. For more details, see 'Image gallery' Looper control.
- Gallery in columns: Display mode corresponding to the Gallery control in columns. For more details, see 'Image gallery' Looper control.
These modes can be selected in the "Details" tab of the Looper control description window.
Standard vertical mode or column gallery mode: Column anchoring
The available options are:
- Variable column width: If the width of the looper allows for an additional column, the number of columns does not change. Only the width of columns is modified.
- Variable width and number of columns: If the width of the looper control allows for an additional column, it will be added. Before adding the column, the rows are stretched horizontally.
- Variable number of columns (left): If the width of the looper control allows for an additional column, it will be added. Before adding the column, the columns are aligned on the left and an empty area may appear on the right.
- Variable number of columns (columns): If the width of the looper control allows for an additional column, it will be added. Before adding a column, the columns are centered in the control and an empty area may appear on either side of the centered columns.
- Fixed width and number of columns (left): The number of columns and the width of the columns are not changed. Columns are aligned to the left.
- Fixed width and number of columns (centered): The number of columns and the width of the columns are not changed. The columns are centered.
You cannot select a specific display mode: the Looper controls display a single column.
Resizing the cells of a Looper control
You can allow the user to resize the cells in a Looper control. In the "Details" tab of the control description, check the "Resizable" option next to:
- "Row height".
- "Column width".
Remark: The default height of a row can be specified.
Other settings in the "Details" tab
Input settings define the behavior of Looper controls based on a data file in edit mode. The available options are as follows:
- Cascading input: Pressing the Enter key in an edit control is used to automatically perform an input in a new row.
This option is not available.
- Save during row exit or Save during column exit: The record currently modified or created will be automatically saved in the corresponding data file as soon as the row is no longer selected. If this option is not selected, the record must be saved programmatically with LooperSave.
- Locke record during modification: When modifying a row, the corresponding record in the data file will be automatically locked until the modification is validated.
The display of horizontal/vertical scrollbar can be:
- automatic: the scrollbar will be displayed when necessary.
- always visible: the scrollbar will always be displayed.
- never visible: the scrollbar will never be displayed.
A tooltip can be displayed on the vertical scrollbar. This tooltip displays the number of the current row in relation to the total number of rows.
This option is not available.
Movements and gestures
The following options are available:
- Per-pixel scrolling: a row may not be entirely displayed according to the scrollbar position.
- Touch scrolling: used to handle the scrollbar via a touch screen.
The Looper control allows searching in the data displayed. The available options are:
- By using the menu of A.A.F.: The search will be performed via the "Search" option of the AAF menu (Automatic Application Features).
- Always visible: a search control will always be displayed above the Looper control.
- Never: No search can be performed in the Looper control.
When a Looper control is populated programmatically
When a Looper control is populated programmatically, some specific information can be displayed:
- Progress Bar,
- Information window, etc.
To display information when populating a Looper control programmatically:
- Open the Looper control description window.
- In the "Details" tab of the control description window, check "Display an internal window over the rows".
- If necessary, specify the internal window to be used. You can:
- use the WINDEV default window ("None" option).
- import the preset window into the project and customize it ("Preset window" option).
If this option is selected, the WDAAF internal component is immediately added to the current project. The "IW_TableLoadStatus" internal window is automatically associated with the feature.
Remark: If the WDAAF component already exists, only the window is added to the component.
- If necessary, validate the control description window.
- To enable this mechanism, call LooperStartFilling and LooperEndFilling to frame the code used to populate the Looper control.
- By default, the "No available data" message is displayed in the empty Looper control. During the fill, an infinite progress bar is displayed at the bottom of the Looper control.
- The default internal window has 3 planes:
- Plane 1 containing an infinite progress bar.
- Plane 2 containing the caption displayed if the Looper control is empty. The caption "No available data" is displayed by default.
- Plane 3 containing the caption displayed before the call to LooperStartFilling.
- The "IW_TableLoadStatus" internal window can also be used to programmatically populate Table controls.
Different content in each row ("Content" tab)
The Looper controls allow you to customize the appearance of rows: layout, content, ... This makes it possible to place Looper controls within other Looper controls.
To create a Looper control with variable content:
- Create a Looper control populated programmatically. This control must be a vertical Looper control containing a single column.
- Open the Looper control description window.
- In the "Content" tab of control description:
- Check "Use an internal window per row (LooperAddIW function)".
- Indicate the mode for unloading the internal windows:
- Never: The internal windows are loaded when the associated row is visible in the control. The unload is never performed when using the control. It is performed when closing the window. This mode is recommended if there are few internal windows and if they do not contain many controls .
Advantage: The entire data is always available
Drawback: High memory consumption.
- When the row is no longer visible (option selected by default): The internal windows are loaded when the associated row is visible in the control. The unload is performed when the row is not visible anymore. This mode is recommended for the non-editable Looper controls. Indeed, if an internal window allows the input, the content typed by the user is lost when this internal window is no longer visible.
Advantage: Consumes little memory.
Drawback: Loss of information typed by the user.
- Row not visible + IW containing read-only controls: The internal windows are loaded when the associated row is visible in the control. The unload is performed according to the type of row:
- If the row contains no control allowing the user input, the associated internal window is unloaded when it is no longer visible.
- If the row allows the input, the associated internal window is never unloaded.
- Validate the control description window.
- Create the different internal windows corresponding to the rows of the Looper control.
- Add the internal windows to the Looper control using the following functions:
|LooperAddIW||Adds a row as an internal window at the end of a Looper control populated programmatically.|
|LooperInsertIW||Inserts a row as an internal window into a Looper control populated programmatically.|
|LooperModifyIW||Modifies a row corresponding to an internal window in a Looper control populated programmatically.|
Characteristics of internal windows
The characteristics regarding the width and height of internal windows are as follows:
- Height: The height of the row using an internal window exactly corresponds to the height of internal window defined in edit. The height of internal window cannot exceed the height of Looper control.
In most cases, we advise you to create the internal window with the smallest possible width and to use anchors.
- If the width of the internal window is less than the width of the Looper control, the internal window is automatically increased and anchors are applied.
- If the width of the internal window exceeds the width of the Looper control, the internal window is automatically truncated.
Remark: If the internal window includes controls adapted to content, the row height will be increased or reduced according to the content.
Unit examples (WINDEV): The Looper control
Cross-platform examples (WINDEV Mobile): WM Managing Contacts
Cross-platform examples (WINDEV Mobile): WM Attendance
This page is also available for…