WINDEV, WEBDEV AND WINDEV MOBILEONLINE HELP
Requested information. If several types of information are requested, each type of information is separated by a CR character (Carriage Return). The order in which the information is returned (if requested) is as follows: <Type of network><Operator><GSM signal><Roaming><Plane mode>
Requested information: networkRoamingRoaming mode of data.If this information is requested, <Result> is set to:1 if the current connection uses the data roaming0 otherwise. This constant is not available.networkAirPlaneModeManagement of plane mode.If this information is requested, <Result> is set to:1 if the device is in plane mode.0 otherwise. This constant is not available.networkOperatorName of network operator used.Depending on the type of network or if the plane mode is enabled, this information may not be specified.If no SIM card is found, this information may correspond to an operator name if the phone is "Sim-locked". networkGSMSignalIntensity of the GSM signal included between 0 (no signal) and 100 (optimum signal). This constant is not available.networkTypeType of network used to access the data on the mobile network.Roaming mode of data.If this information is requested, <Result> is set to:network2G: 2G networknetworkEdge: Edge networknetwork3G: 3G networknetwork4G: 4G networknetworkUnknown: Unknown network (or SIM card not found).
WiFi connection information
Last update: 08/26/2020
Send a report | Local help
J'accepte les termes de la licence
All you have to do is configure your product as follows: