WINDEV, WEBDEV AND WINDEV MOBILEONLINE HELP
Value of all the elements found in the specified column, in the following format:
<Value of Element 1> + TAB + <Value of Element 2> + TAB + ... + TAB + <Value of Element N>
Name of matrix to read, defined by MatCreate.
Number of the column to read.
Total size of an element to read. This size includes the sign, the thousand separator, the decimal point, the exponent, the integer parts and the decimal parts of the element value.If the element has more than <Total Element Size> digits, <Total Element Size> is increased.If the element has less than <Total Element Size> digits, <Result> is filled with spaces.If <Total Element Size> is not specified, the value of the element read will have the size of its significant part.<Total Element Size> must not exceed 100.If <Total Element Size> is set to 0, the value of the element will have the size of its significant part.
Number of decimals to read. This parameter always starts with a dot ("."). The last decimal will be rounded. This parameter only affects the float notations ("f") and the exponential notations ("e" and "E"). <Total Element Size> is ignored if <Number of Decimals> is greater than <Total Element Size>.<Number of Decimals>"d" type (integer)"e" or "E" type (exponential notation) and "f" type (float notation).0-0.N-N (if N is greater than the number of decimals, the decimal part will be filled with zeros)(not specified)-6
Format for representing an element:d: the value of the element is expressed as a signed integer. The digits found after the decimal point are truncated and <Number of Decimals> is ignored.e or E: the value of the element is expressed as an exponential notation with 1 digit before the decimal point, <Number of Decimals> digits after the decimal point and at least 2 digits in the exponent.
Size of <Result>
Extracting an element value from <Result>
Last update: 06/04/2019
Send a report | Local help
J'accepte les termes de la licence
All you have to do is configure your product as follows: