| |
AddChildDelayed | ..AddChildDelayed indicates the procedure that must be called during a click for expanding a row found in a TreeView control or in a TreeView Table control. |
Address | ..Address is used to:- Connect the Conference control (and the associated stream) to a correspondent. This property is equivalent to StreamConnect.
- Find out the address corresponding to the last request for outgoing connection.
|
AdLoaded | ..AdLoaded is used to find out whether an ad is currently loaded in the Ad control. |
Versions 09 and laterAlias Alias | ..Alias is used to: - find out or modify the alias of a window (WINDEV)
- Find out and modify the alias of a dynamic tab pane (WINDEV)
- find out the internal HTML/Javascript name of a control (WEBDEV).
|
AlternativeText | ..AlternativeText is used to find out and modify the alternative text for the page controls. |
Anchor | ..Anchor is used to manage the anchor of a control in a window or report. |
AnchorRateBottom | ..AnchorRateBottom is used to:- Find out the anchor rate when a control moves on the vertical axis.
- Modify the anchor rate when a control moves on the vertical axis.
|
AnchorRateHeight | ..AnchorRateHeight is used to:- Find out the anchor rate in height of a control.
- Modify the anchor rate in height of a control.
|
AnchorRateRight | ..AnchorRateRight is used to:- Find out the anchor rate when a control moves on the horizontal axis.
- Modify the anchor rate when a control moves on the horizontal axis.
|
AnchorRateWidth | ..AnchorRateWidth is used to:- Find out the anchor rate when a control (or a table column) stretches on the horizontal axis.
- Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
|
AnchorToContent | ..AnchorToContent is used to find out and modify how the control adapts according to its content. |
Animation | ..Animation is used to manage the animation of an image. |
AnimationDirectionAlernate | The AnimationDirectionAlernate property allows you to: - Check whether the animation in an infinite Progress Bar control is played forwards first, then backwards.
- Configure the animation in a infinite Progress Bar control to be played forwards first, then backwards.
|
AnimationDuration | ..AnimationDuration is used to find out and modify the duration of animation: - in a Chart control. This duration is set to 30 hundredths of a second by default.
- in an infinite Progress Bar control. This duration is set to 200 hundredths of a second by default.
- in an Image Gallery Looper control.
|
AnimationPeriod | AnimationPeriod is used to find out and modify the rotation speed of the animation performed in the Cube or Carousel controls. |
AttachPointEnd | ..AttachPointEnd is used to find out and modify the position of the end attach point in a Wire control. |
AttachPointStart | ..AttachPointStart is used to find out and modify the position of the start attach point in a Wire control. |
AutoBrowse | ..AutoBrowse is used to find out whether the browse performed in a browsing list box, looper, table or combo box is automatic or programmed. |
AutoLineWrap | ..AutoLineWrap is used to: - find out whether the line wrap is automatically supported in a multiline edit control or in a column found in a table (or in a treeview table).
- indicate the management mode of line wrap in a multiline edit control or in a column found in a table (or in a treeview table)
|
AutomaticallyMinimized | ..AutomaticallyMinimized is used to: - Find out the timeout before the Repositionable Note control is automatically minimized.
- Define the timeout before the Repositionable Note control is automatically minimized.
|
AutomaticErase | ..AutomaticErase is used to:- find out whether an edit control is in "Automatic erase" mode.
- modify the "Automatic erase" characteristic of an edit control.
|
AutomaticLink | ..AutomaticLink is used to find out the mode for automatic detection of links in the multiline edit controls and to enable (or not) this mode. |
AutomaticReorganization | ..AutomaticReorganization is used to find out and modify the mode for automatic reorganization of the tasks in a "Gantt Chart" column. |
AutomaticTextColor | ..AutomaticTextColor is used to find out and modify the color that will be used for all the captions of the elements that use the "automatic" color. |
AutomaticTooltip | ..AutomaticTooltip is used to allow (or not) the display of automatic tooltips on the List Box, Table and TreeView Table controls. |
BackgroundColor | ..BackgroundColor is used to manage the background color of a control, window, page or report block. |
BackgroundImage | ..BackgroundImage is used to find out and modify the background image of an element: window, page, control or report. |
BackgroundImageLine | ..BackgroundImageLine is used to find out and modify the background image used for each row: - of a Table control,
- of a TreeView Table control,
- of a Looper control.
|
BackgroundImageState | ..BackgroundImageState is used to find out and modify the number of drawings found in the image associated with the border of a button. |
BarVisible | ..BarVisible is used to manage the selection bar on a column found in a Table (or Treeview Table) control. |
Bearing | The Bearing property is used to determine or modify the bearing of the map displayed in a Map control. |
Versions 26 and laterBody New in version 26Body Body | The Property Body allows to know and modify the HTML body of an Control of HTML display. |
Border | ..Border is used to find out and modify the border characteristics: - for a report control or for a report block.
- for a window control.
- for a cell of a Table control.
|
BrowsedFile | ..BrowsedFile is used to find out and modify the data source used to display records in controls based on a data file. |
BrowsedItem | ..BrowsedItem is used to:- Find out the item used to automatically browse the Table, Looper, List Box, ListView and Combo Box controls, the reports based on file or the supercontrols.
- Modify the item used to automatically browse the Table, Looper, List Box, ListView and Combo Box controls, the reports based on file or the supercontrols. Then, the browse is reinitialized.
|
BrushStyle | ..BrushStyle is used to find out and modify the display style for the background of the cells found in the tables and/or in the treeview tables. |
ButtonType | ..ButtonType is used to find out and modify the type of a Button control: Cancelation, Interruption, Validation, ... |
CalculatorButton | ..CalculatorButton is used to find out and specify whether a Numeric or Currency edit control proposes a button to display a popup calculator. |
CalendarButton | ..CalendarButton is used to find out and indicate whether a Date edit control proposes a button to display a popup calendar. |
Caption | In a database, ..Caption is used to:- Find out the caption associated with a file item.
- Find out the caption associated with a data file.
- Find out and modify the connection caption.
In a report, ..Caption is used to: - Find out the text displayed in a Static or Link control.
- Modify the text displayed in a Static or Link control.
In a window or in a page, ..Caption is used to: - Find out and modify the caption of a control in a window or in a page.
- Find out and modify the caption of a menu option.
- Find out and modify the title of a window or page.
- Find out the content of a site map path.
|
CaptionHTML | ..CaptionHTML is used to handle a control caption in HTML code format. |
CaptionIfNew | ..CaptionIfNew is used to find out and modify the caption of the new pane opened by the end user in a dynamic Tab control. |
CaptionWidth | ..CaptionWidth is used to find out and modify the width reserved for the caption area in an edit control or in a Combo Box control. |
Checked | ..Checked is used to:- Find out whether a menu option is checked or not.
- Display (or not) a checkmark in front of a menu option.
|
CheckmarkVisible | ..CheckmarkVisible is used to: - Find out whether the checkmark is visible (or not) in front of a row of a TreeView control.
- Modify the visibility of the checkmark in front of a row of a TreeView control.
|
CheckSpell | ..CheckSpell is used to enable or disable the automatic spell check. |
CodeCSS | ..CodeCSS is used to read and modify the CSS code associated with a Web Composant control. |
CodeHTML | ..CodeHTML is used to read and modify the HTML code associated with a Web Component control. |
CodeJS | ..CodeJS is used to read and modify the CSS code associated with a Web Composant control. |
Collapsed | ..Collapsed is used to:- find out or define the status (collapsed or expanded) that will be used when rows are added into a TreeView Table control.
- find out or modify the collapsed/expanded status for:
- the breaks of a Table control,
- the breaks of a Looper control,
- a Drawer control,
- a Ribbon control,
- a Navigation Bar control.
- a Pivot Table control in a report.
|
CollapsedImage | ..CollapsedImage is used to: - find out and/or modify the default image associated with a collapsed row in a TreeView Table control.
- find out and/or modify the default image associated with a collapsed row in a TreeView control.
- find out and/or modify the image associated with a specific collapsed row in a TreeView Table control.
- find out and modify the image in a collapsed row of a TreeView item in a "TreeView table" type report.
|
Versions 09 and laterColor Color | ..Color is used to find out and modify the font color for:- a font variable.
- a text displayed in a Static control or in a calculated control of a report.
- a text displayed in a window control.
- a text displayed in a page control.
|
ColumnWidth | ..ColumnWidth is used to find out and modify the width of each column found in a multi-column Looper control. |
CompactOption | ..CompactOption is used to:- find out whether the options found in a Check Box, Radio Button or Dashboard control are in compacted mode.
- switch the options found in a Check Box, Radio Button or Dashboard control to compacted mode.
|
CompactToolbar | ..CompactToolbar is used to:- find out whether the toolbars found in the window are compacted.
- compact (or not) the toolbars.
|
Compass | The Compass property is used to: - display or hide the compass on a Map control,
- determine whether the compass is displayed on a Map control.
|
Content | ..Content is used to read or write the content of a control: - Memory List Box,
- Memory Combo Box,
- Spreadsheet.
|
Versions 12 and laterCount Count | ..Count is used to find out the number of elements in a set. |
CrosshairColor | ..CrosshairColor is used to find out and modify the color of the crosshair for a Chart control. |
CrosshairOpacity | ..CrosshairOpacity is used to find out and modify the opacity of the crosshair for a Chart control. |
CrosshairThickness | ..CrosshairThickness is used to find out and modify the thickness of the crosshair for a Chart control. |
Cumulated | ..Cumulated is used to find out whether the value of a row or column found in a Pivot Table control corresponds to a total (total at the end of ra ow or at the end of a column). |
CurrentWorksheet | ..CurrentWorksheet is used to find out and modify the current worksheet in a Spreadsheet control. |
Cursor | ..Cursor is used to find out and modify the position of the mouse cursor in one fo the following controls:- Edit control.
- Editable Combo Box.
- "Edit control" table column and "Editable Combo Box" table column.
- Word Processing control.
|
CursorEnd | ..CursorEnd is used to find out and modify the end of selection position of the mouse cursor in one of the following controls:- Edit control.
- Editable Combo Box.
- "Edit control" table column and "Editable Combo Box" table column.
- Word Processing control.
|
DayBreakHeight | ..DayBreakHeight is used to find out and modify the height of the breaks between the days in a Scheduler control where the days are displayed in row and the resources in column. |
DayHeight | ..DayHeight is used to find out and modify the height of the days in a Scheduler control where the days are displayed in row and the resources in column. |
DayWidth | ..DayWidth is used to find out and modify the width of days: - in a Scheduler control where the days are displayed in column and the resources in row.
- in a Gantt Chart column.
|
DefaultFilePath | Indique le nom du fichier associé à un champ Tableur |
DeleteButton | ..DeleteButton is used to find out and modify the presence and position of a delete button in a Text edit control. |
Description | ..Description is used to find out and modify the description associated with the page. |
Detection | ..Detection is used to find out and modify the automatic detection of incoming streams. If the stream detection is enabled, the streams allows the detection. |
DirectInputAPT | ..DirectInputAPT is used to find out and specify whether a user can directly modify the title of an appointment in an Organizer or Scheduler control. |
Display | ..Display is used to find out and modify the video currently displayed by the Conference control. The Conference control can use the incoming video, the outgoing video or no video. |
DisplayBookmarks | ..DisplayBookmarks is used to: - identify the display mode of bookmarks in a Word Processing control.
- show or hide bookmarks in a Word Processing control.
|
DisplayControlCharacters | The Property DisplayCharactersControl allows to: - Find out whether the display of control characters is enabled in a Word Processing control.
- Enable (or not) the display of control characters in a Word Processing control.
|
DisplayCurrency | ..DisplayCurrency allows you to find out and modify the currency used when displaying and/or typing data in a "Currency + Euro" control. |
DisplayedItem | ..DisplayedItem is used to:- Find out the item or the variable displayed by the control.
- Modify the item or the variable displayed by the control.
|
DisplayedItemImage | ..DisplayedItemImage is used to:- Find out the item corresponding to the image displayed in a ListView control.
- Modify the item corresponding to the image displayed in a ListView control.
|
DisplayedSection | ..DisplayedSection is used to find out and modify the section of an image displayed in an Image control. |
DisplayedValue | ..DisplayedValue is used to find out the value currently displayed on the screen in a window control or in a page control. |
DisplayEnabled | ..DisplayEnabled is used to:- find out whether the display of a control or window is enabled or not. If the display is enabled, the content of the control is refreshed on a regular basis.
- enable (or not) the display of a control or window.
|
DisplayEvenIfNull | ..DisplayEvenIfNull is used to: - Find out whether a row or a column in a Pivot Table control is displayed even if it contains no value.
- Configure a row or a column found in a Pivot Table control so that it is displayed (or not) even if it contains no value.
|
DisplayLink | ..DisplayLink is used to find out and modify the display mode of the links in a Gantt Chart column. |
DisplayMask | ..DisplayMask is used to: - Find out the display mask.
- Modify the display mask.
This display mask is displayed when the control is in read-only or when the control does not have focus. |
DisplayMode | ..DisplayMode is used to find out and modify the display mode in a Word Processing control or PDF Reader control. |
DisplayModeAutoWhenLoading | ..DisplayModeAutoWhenLoading is used to find out and modify the behavior of display mode when loading a PDF document. |
DisplayOrphan | ..DisplayOrphan is used to: - Find out whether a row or a column found in a Pivot Table control is displayed when it has no parent.
- Modify the display mode of a row or column in a Pivot Table control when it has no parent.
|
DndSource | ..DndSource is used to find out and modify the behavior of a control during Drag and Drop. |
DndTarget | ..DndTarget is used to find out and modify the behavior of a control during Drag and Drop. |
Document | The Document property is used to identify and modify the HTML document associated with an HTML Display control. |
DoubleClick | ..DoubleClick allows you to know and modify the name of the Button control that will be executed when double-clicking on a control. |
Driver | ..Driver is used to find out the driver for video capture that is associated with the Camera control. |
DynamicTab | ..DynamicTab is used to:- Find out the type of a Tab control (static tab or dynamic tab).
- Modify the type of a Tab control (static tab or dynamic tab).
|
ElementHeight | ..ElementHeight is used to:- Find out or modify the height of the elements in an Organization Chart control.
- Find out or modify the height of the cells in a Dashboard control.
|
ElementOrientation | ..ElementOrientation is used to find out and modify the orientation of an Organization Chart control. |
ElementWidth | ..ElementWidth is used to:- Find out or modify the width of the elements in an Organization Chart control.
- Find out or modify the width of the cells in a Dashboard control.
|
Ellipsis | ..Ellipsis is used to find out and modify the management mode of ellipsis in: - a window control (Static, edit control, List box, Button, Combo box or Static table column).
- a Static control in a report.
|
Versions 09 and laterEmpty Empty | ..Empty is used to find out whether:- a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control.
- a Chart control contains no series.
- a report control is empty (control linked to an item).
- an array (or an associative array) contains no element.
- an element of an associative array exists or not.
- a queue, a list or a stack contains no element.
|
EmptyIfZero | ..EmptyIfZero is used to: - Find out the management mode of zero value in a control.
- Modify the management mode of zero value in a control
|
EndControl | ..EndControl is used to find out and modify the end control of a Wire control. |
EndDate | ..EndDate is used to find out and modify the end date of the period selected: - in a Calendar control,
- in an Organizer control.
- in a Scheduler control.
|
EndTotalRange | ..EndTotalRange is used to: - find out and modify the last displayable date or time in a Scheduler control or in a TimeLine control.
- modify the last displayable time in a TimeLine control.
|
EndVisibleRange | ..EndVisibleRange is used to: - find out and modify the last visible date or time in a Scheduler control or in a TimeLine control.
- modify the last visible time in a TimeLine control.
|
ExpandedImage | ..ExpandedImage is used to: - find out and modify the default image associated with an expanded row in a TreeView Table control.
- find out and/or modify the default image associated with an expanded row in a TreeView control.
- find out and modify the image associated with a specific expanded row in a TreeView Table control.
- find out and modify the image associated with an expanded row in a treeview item of a "TreeView table" report.
|
FileLink | ..FileLink is used to find out and modify the link between a control:- and an item found in a data file.
- and a variable.
- and several variables.
|
FilePath | ..FilePath is used to find out: - the name of xlsx file associated with a Spreadsheet control. This name is initialized by SpreadsheetLoad and SpreadsheetSave.
- the name of file associated with an Image Editor control. This name is initialized by PicOpen and PicSave.
- the name of PDF file associated with a PDF Reader control. This name is initialized by PDFReaderOpen.
- the name of DOCX file associated with a Word Processing control. This name is initialized by DocOpen and DocSave.
|
FillType | ..FillType is used to find out the type of source used to fill the Table, List Box, ListView, Combo Box and Looper controls. |
Filter | ..Filter is used to find out and modify the filter used to display records in: - browsing Table controls,
- browsing TreeView Table controls,
- browsing List Box controls,
- browsing Combo Box controls,
- browsing Looper controls.
|
FilterProcedure | ..FilterProcedure is used to find out and modify the procedure that will be called to filter on a row or column header when calculating a pivot table. |
FocusOnClick | ..FocusOnClick is used to:- Find out whether a control gains focus during a click.
- Modify the effect for taking focus during the click on a control.
|
FolderImageWidth | ..FolderImageWidth is used to find out and modify the width of the image corresponding to the folders in the TreeView and TreeView Table controls. |
FolderModeImage | ..FolderModeImage is used to find out and modify the display mode of the image corresponding to the folder in the TreeView and TreeView Table controls. |
Versions 09 and laterFont New in version 09Font Font | ..Font is used to:- Find out the identifier of the font used in a control found in a report, in a page or in a window.
- Modify the font used in a control found in a report, in a page or in a window.
|
FontBold | ..FontBold is used to:- Find out whether a text is bold or not.
- Modify the weight of a text.
|
FontCharset | ..FontCharset is used to:- Find out the character set used by the screen fonts of a control.
- Modify the character set used by the screen fonts of a control.
|
FontCondensed | ..FontCondensed is used to:- Find out whether the characters in a text are condensed or not.
- Condense (or not) the characters in a text.
|
FontExtended | ..FontExtended is used to:- Find out whether the characters in a text are extended or not.
- Extend (or not) the characters displayed in a text.
|
FontItalic | ..FontItalic is used to:- Find out whether the italic attribute is assigned to a text.
- Modify the italic attribute of a text.
|
FontLarge | ..FontLarge is used to:- Find out whether the characters in a text are enlarged or not.
- Enlarge (or not) the characters in a text.
|
FontMinSize | ..FontMinSize allows you to find out and change the minimum font size used in a Static control with the option "Reduce font size". |
FontName | ..FontName is used to:- Find out the font used in a control.
- Modify the font used in a control.
|
FontSize | ..FontSize is used to:- Find out the size of the font used in a control.
- Modify the size of the font used in a control.
|
FontStrikeOut | ..FontStrikeOut is used to:- Find out whether a text is struck out or not.
- Strike out (or not) the text displayed in a control.
|
FontUnderlined | ..FontUnderlined is used to:- Find out whether a text is underlined or not.
- Underline (or not) a text.
|
FormattingMarksColor | ..FormattingMarksColor allows you to: - find out the color of formatting marks in a Word Processing control.
- change the color of formatting marks in a Word Processing control.
|
FormulaBarVisible | ..FormulaBarVisible is used to: - Find out whether a formula bar is displayed in a Spreadsheet control.
- Display (or not) a formula bar in a Spreadsheet control.
|
FullName | ..FullName is used to find out the full name:- of a control.
- of a window.
- of a menu option.
- of a table column.
|
GranularityDuration | ..GranularityDuration allows you to find out and modify the size of the grid used to resize:- the appointments of an Organizer control.
- the appointments of a Scheduler control.
- the events of a TimeLine control.
- the tasks found in a Gantt Chart column.
|
GranularityMovement | ..GranularityMovement is used to find out and modify the size of the grid used to move: - the appointments of an Organizer control.
- the appointments of a Scheduler control.
- the events of a TimeLine control.
- the tasks found in a Gantt Chart column.
|
Grayed | ..Grayed is used to: - Find out whether a control (or a group of controls) is grayed or not.
- Gray or ungray a control or a group of controls.
|
GridlinesVisible | ..GridlinesVisible is used to: - Find out whether the gridlines are visible or not in a Spreadsheet control.
- Modify the visibility of gridlines in a Spreadsheet control.
|
Versions 09 and laterGroup Group | ..Group is used to: - find out whether the control belongs to a group of controls. If the control belongs to one or more groups, ..Group is used to identify these groups of controls.
- associate a control with a group of controls.
|
HandwrittenInput | ..HandwrittenInput is used to manage the input with the stylus (Windows XP Tablet PC) or with the mouse (Windows Vista). |
HeaderVisible | ..HeaderVisible is used to: - Find out whether the row and column headers are displayed in a Spreadsheet control.
- Display (or not) the row and column headers in a Spreadsheet control.
|
Height | ..Height is used to know and modify the height:- of a control or block in a report.
- of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control.
- of a control (in a page), break header or footer in a Looper control. The control can be overlayable or not.
|
HeightExpanded | ..HeightExpanded is used to find out and modify the height of an expanded iOS widget. |
HelpNumber | ..HelpNumber is used to find out and modify the help number associated with a control. |
Versions 12 and laterHint New in version 12Hint Hint | ..Hint is used to find out and modify the hint text displayed when the edit control is empty. |
HintTextColor | ..HintTextColor is used to find out and modify the color of the hint text in an edit control. |
HorizontalAlignment | ..HorizontalAlignment is used to find out and modify the horizontal alignment of a control. |
HTMLAfter | ..HTMLAfter used to find out and modify the HTML code added after the control. |
HTMLBefore | ..HTMLBefore used to find out and modify the HTML code added before the control. |
HTMLClass | ..HTMLClass is used to read and modify the value of the HTML "class" attribute of the control. |
HTMLEdit | ..HTMLEdit is used to: - find out whether a Word Processing control is displayed in optimized mode for the HTML edit,
- modify a Word Processing control to display it (or not) in optimized mode for the HTML edit.
|
HTMLEndPage | ..HTMLEndPage is used to find out and modify the HTML code added at the end of the page. |
HtmlFormat | ..HtmlFormat is used to:- find out whether an edit control accepts the input in HTML format.
- modify the input format of an edit control.
|
HTMLHeader | ..HTMLHeader is used to find out and modify the HTML code added into the page header. |
Versions 16 and laterIcon New in version 16Icon Icon | ..Icon is used to:- Find out the icon displayed in the title bar of a window or a Dockable Panel control.
- Change the icon displayed in the title bar of a window or a Dockable Panel control.
|
Identifier | ..Identifier is used to find out and modify the name under which the current computer appears for the correspondents (presentation of the number). |
Versions 09 and laterImage Image | ..Image is used to find out and modify the background image associated with a control or with a block. |
ImageHeight | ..ImageHeight is used to:- Find out the height of the image section displayed in an image control or in the background of a chart control.
- Modify the height of the image section displayed in an image control or in the background of a chart control.
|
ImageMode | ..ImageMode is used to find out and modify the display mode of an image in an Image control, in an Image table column and in the background of a Chart control found in a window. |
ImageState | ..ImageState is used to find out and modify the number of drawings found in:- The image associated with a button.
- The image of the cursor in a slider.
- The image associated with the button of a sidebar pane.
- The image associated with the button of a tab pane.
- The image associated with the Rating control.
|
ImageType | ..ImageType is used to find out the type of image currently edited in an Image Editor control (icon or image). |
ImageWidth | ..ImageWidth is used to find out and modify:- the width of the image section that is displayed in an Image control or in the background of a Chart control.
- the width reserved in a row of a treeview table for the image of a treeview column.
|
IncomingData | ..IncomingData is used to find out and modify the type of data received by the stream. |
InitialAnimation | ..InitialAnimation is used to find out the initial status of animation in an Image control, a button, a Static control or a Carousel control. |
InitialContent | ..InitialContent is used to find out and modify the initial content:- of a memory List Box control.
- of a memory Combo Box control.
- of a "List of values" column found in a Table control.
- in a Spreadsheet control.
|
InitialHeight | ..InitialHeight is used to:- Find out the creation height of a control or window.
- Modify the base height used to anchor the controls "in height".
- Find out the creation height of a block or control in a report.
|
InitialState | ..InitialState is used to find out the initial status of a control. |
InitialValue | ..InitialValue is used to find out the initial value of a control found in a window or in a page. |
InitialVisible | ..InitialVisible is used to find out whether:- a control was visible during the first display of the associated window or page.
- a window was visible during its first display.
|
InitialWidth | ..InitialWidth is used to:- Find out the initial width of a control or window.
- Modify the base width used to anchor the controls in "width".
- Find out the initial width of a report control.
|
InputEnabled | ..InputEnabled is used to: - Find out whether a control or a group of controls is editable or read-only.
- Modify the input options for a control or for a group of controls.
|
InputFormula | ..InputFormula is used to: - find out whether the end user can enter or modify formulas in a Spreadsheet control.
- allow (or not) the end user to enter or modify formulas in a Spreadsheet control.
|
InputMask | ..InputMask is used to:- find out the input mask.
- modify the input mask (among the available masks for the type).
|
InputMode | ..InputMode is used to find out and modify the input mode on a Smartphone. |
InputType | ..InputType is used to find out and modify the type of input allowed by a control: Duration, Date, Numeric, ... |
InputValue | ..InputValue is used to: - find out whether the end user can enter or modify values in a Spreadsheet control.
- allow or not the end user to enter or modify values in a Spreadsheet control.
|
InternalWindowPopup | The InternalWindowPopup property is used to get and modify the name of the internal window used to customize the content of the popup displayed for the markers in a Map control. |
Keywords | ..Keywords is used to find out and modify the keywords associated with a page. |
Layout | ..Layout is used to find out and modify the layout of cells in a Layout control. |
LeftIndent | ..LeftIndent is used to find out and modify the available space on the left of text in:- the columns of Table and TreeView Table controls (between the beginning of column and the beginning of text).
- the edit controls.
- the Combo Box and List Box controls.
- the Button controls.
- the Ribbon controls.
- the Tab controls.
- The Static controls.
|
LineHeight | ..LineHeight is used to find out and modify the height of rows:- in a List Box control,
- in a ListView control (standard display mode only),
- in a Table control,
- in a Combo Box control,
- in a Looper control (height of the row),
- in an Organizer control.
|
ListViewMode | ..ListViewMode is used to:- Find out the display mode of a ListView control.
- Modify the display mode of a ListView control.
|
LowerValue | ..LowerValue is used to: - Find out the lower bound of the interval currently selected in a Range Slider control.
- Modify the lower bound of the interval currently selected in a Range Slider control.
|
MagnifierMode | ..MagnifierMode is used to find out and modify the management mode of the magnifier in the title of the Table control (or TreeView table) columns. |
MapMode | ..MapMode is used to find out and change the display mode of a map in a Map control. |
MarginHeight | ..MarginHeight is used to: - Find out the vertical margin between the Widgets found in a Dashboard control.
- Modify the vertical margin between the Widgets found in a Dashboard control.
|
MarginInterCell | ..MarginInterCell is used to: - find out the margin between rows or columns in a Layout control.
- modify the margin between rows or columns in a Layout control.
|
MarginWidth | ..MarginWidth is used to: - Find out the horizontal margin between the widgets found in a Dashboard control.
- Modify the horizontal margin between the widgets found in a Dashboard control.
|
MaskTitleDate | ..MaskTitleDate is used to find out and modify the mask used for the title of the day columns in an Organizer control or in a Scheduler control. |
MaskTitleTime | ..MaskTitleTime is used to find out and modify the mask used for the title of time columns: - in an Organizer control.
- in a Scheduler control.
- in a TimeLine control.
|
MaxButtonWidth | ..MaxButtonWidth is used to find out and modify the maximum width of a button found in a tab pane. |
MaxHeight | ..MaxHeight is used to find out and modify the maximum height of a control or window. |
MaxLeafPerRow | ..MaxLeafPerRow is used to find out and modify the maximum number of elements per row in an Organization Chart control. |
MaxLineHeight | ..MaxLineHeight is used to find out and modify the maximum height of: - the rows in a Table control (case of multiline rows with automatic resizing).
- the rows in a Treeview Table control.
- the rows in a Looper control.
|
MaxNbSegment | ..MaxNbSegment is used to find out and modify the maximum number of line segments for drawing a Wire control. |
MaxValue | ..MaxValue is used to:- find out and modify the upper bound of a report based on a data file.
- find out the upper bound defined for the current filter.
- find out the maximum value of a chart series.
- find out and modify the maximum value for some types of controls.
|
MaxWidth | ..MaxWidth is used to find out and modify the maximum width of a control or window. |
MDIBottom | ..MDIBottom is used to find out and modify the distance between the bottom border of the MDI parent window and the bottom border of the MDI area. |
MDILeft | ..MDILeft is used to find out and modify the distance between the left border of the MDI parent window and the left border of the MDI area. |
MDIRight | ..MDIRight is used to find out and modify the distance between the right border of the MDI parent window and the right border of the MDI area. |
MDITop | ..MDITop is used to find out and modify the distance between the top border of the MDI parent window and the top border of the MDI area. |
Memory | ..Memory is used to find out whether the specified control is a memory control or a browsing control. |
MemoryCurrency | ..MemoryCurrency is used to find out and modify the currency used when handling a "Currency + Euro" control by programming. |
MemoryFormat | ..MemoryFormat is used to find out and modify the format of the value returned for:- the Date or Time edit controls.
- the Date or Time table columns.
- the Calendar controls.
- the Static controls.
- the editable combo boxes.
- the table columns displayed by combo boxes.
|
Versions 12 and laterMerge Merge | ..Merge is used to merge the cells found in a Table or TreeView Table control. |
Message | ..Message is used to:- Find out the help message associated with a control or with a menu option (in a window).
- Modify the help message associated with a control or with a menu option (in a window).
|
MinHeight | ..MinHeight is used to find out and modify the minimum height of a control or window. |
Miniature | ..Miniature is used to:- Find out the image associated with an element of a ListView control.
- Modify the image (the miniature) associated with an element of a ListView control.
|
Minimized | ..Minimized is used to: - find out whether a repositionable note is minimized,
- minimizing or restoring a repositionable note.
|
MinValue | ..MinValue is used to:- find out and modify the lower bound of a report based on a data file.
- find out the lower bound defined for the current filter.
- find out the minimum value of a chart series.
- find out and modify the minimum value for some types of controls.
|
MinWidth | ..MinWidth is used to find out and modify the minimum width of a control or window. |
ModificationDurationAPT | ..ModificationDurationAPT allows you to find out and specify whether the user can modify the duration of an appointment in a Scheduler or Organizer control. |
Modified | ..Modified is used to find out whether a control (or a group of controls) was modified by the user (with the keyboard or with the mouse. |
MouseCursor | ..MouseCursor is used to find out and modify the rollover cursor defined for a control, a window or a page. |
Moveable | ..Moveable is used to:- Find out whether a table column can be moved by the user,
- Allow and/or forbid a table column to be moved by the user.
|
MoveableByBackground | ..MoveableByBackground is used to:- find out whether a window can be moved by the background,
- allow (or not) a window to be moved by the background.
|
MovementAPT | ..MovementAPT is used to find out and specify whether the user can move an appointment in a Scheduler control or in an Organizer control. |
MovementTask | ..MovementTask is used to to find out and modify the mode for moving tasks in a Gantt Chart column. |
Multiline | In a window or in a page, ..Multiline is used to:- find out and modify the "Multiline" option of an Edit control.
- find out and modify the "Multiline" option of a column in a Table control.
In an report, the ..Multiline property is used to find out and modify the "Multiline" option of a control. |
MultimediaReader | ..MultimediaReader is used to know and modify the multimedia player currently used by a Multimedia control to play multimedia files. |
Multiselection | ..Multiselection is used to find out and modify the selection mode:- of a Table (and TreeView Table) control.
- of a Pivot Table control.
- of a List Box (and ListView) control.
- of a Looper control.
- of a Calendar control.
- of files in an Upload control.
|
MultiWorksheet | ..MultiWorksheet is used to: - Find out whether a Spreadsheet control manages several worksheets.
- Modify the mode for managing the worksheets in a Spreadsheet control.
|
Versions 09 and laterName New in version 09Name Name | ..Name is used to find out:- the name of the font associated with a Font variable.
- the name of a control, report or report block.
- the name of a control, group of controls or window.
- the name of a control, group of controls or page.
|
NameBrowserFile | ..NameBrowserFile is used to find out the initial name of the file to upload found on the computer of the Web user. |
NameServerFile | ..NameServerFile is used to find out the name of the uploaded file found on the server. |
NavigationPaneVisible | ..NavigationPaneVisible is used to manage the display of thumbnail pane in the PDF Reader control. |
NbAnimationSteps | ..NbAnimationSteps is used to find out and specify the number of drawings found in the image defining the animation of the custom infinite progress bar. |
NbDayDisplayed | ..NbDayDisplayed is used to find out and modify the number of days displayed in an Organizer control or in a Scheduler control. |
NbLinesPerPage | ..NbLinesPerPage is used to:- Find out and modify the maximum number of rows per page for a table.
- Find out and modify the maximum number of rows per page for a looper.
|
NbWorksheet | ..NbWorksheet is used to find out the number of worksheets in a Spreadsheet control. |
NewLine | ..NewLine is used to find out:- in a Table control, whether the current row was created by TableAddXXX or TableInsertXXX.
- in a Looper control, whether the current row was created by LooperAddXXX or LooperInsertXXX.
- in an Organizer control, whether an appointment was created via the popup menu.
- in a Scheduler control, whether an appointment was created via the popup menu.
|
Versions 09 and laterNote New in version 09Note Note | ..Note is used to:- Find out the notes associated with a control, a window, a page or a report.
- Modify the notes associated with a control, a window a page or a report.
|
NoteTitle | ..NoteTitle is used to:- Find out the title of the notes used in the program documentation of a control, window, page or report.
- Modify the title of the notes used in the program documentation of a control, window, page or report.
|
NullIfEmpty | ..NullIfEmpty is used to: - Find out whether the value returned by the control is NULL if its content is empty.
- Configure the value returned by the control if its content is empty.
|
Num1stDayOfTheWeek | ..Num1stDayOfTheWeek is used to find out and modify the 1st day of the week displayed in:- a Calendar control.
- an Organizer control.
- a Scheduler control.
- an edit control in Date format with Calendar.
|
NumberAccessiblePages | The Property AccessiblePageNumber shows the number of pages currently loaded in the champ PDF Reader or Word Processing control. |
NumberColumn | ..NumberColumn is used to:- Find out the number of columns in a control containing columns (Table, Check Box, Radio Button controls, etc.).
- Modify the number of columns in a multi-column List Box control.
|
NumberPage | ..NumberPage is used to find out: - the number of pages in a "multi-page" image file. This image is displayed in an Image control or in the background of a Chart control.
- the number of pages in a PDF file displayed in an Image control.
- the number of pages found in a PDF file displayed in a PDF Reader control.
- the number of pages found in a DOCX file displayed in a Word Processing control.
|
NumberRow | ..NumberRow returns the maximum number of rows containing data in a Spreadsheet control. These rows contain data, a formula, formatting or a non-standard height. |
ObserverOrientation | ..ObserverOrientation is used to find out and modify the secondary angle of a Carousel control. |
Opacity | ..Opacity is used to find out and define the percentage of opacity for a window or for the controls found in a window or in a page. |
Option | ..Option is used to configure the display of a Bar Code control. |
OrientationTitle | ..OrientationTitle is used to: - Find out whether the titles of columns in a Table control are slanted.
- Slant (or not) the titles of columns in a Table control (by 45% for example).
|
OriginPassingPoint | ..OriginPassingPoint is used to find out and define the origin of the points whose coordinates are specified in ..WayPoint. |
OutgoingData | ..OutgoingData is used to find out and modify the type of data sent by the stream. |
PageNumber | ..PageNumber is used to: - find out and modify the number of the page displayed in an Image control ("multi-page" image files)
- find out and modify the page number of a PDF file displayed in an image control of a window
- find out and modify the page number of a PDF file displayed in report background.
|
Versions 19 and laterPane New in version 19Pane Pane | ..Pane is used to: - Find out the pane tabs associated with a control.
- Define the pane tabs associated with a control.
|
PaneShift | ..PaneShift is used to find out and modify the shift between the border of a Tab or Ribbon control and the pane buttons. |
ParallaxRateHeight | ..ParallaxRateHeight is used to find out and specify the speed at which a control is reduced when the scrollbar found in the window, the internal window or the page moves. |
ParallaxRateY | ..ParallaxRateY is used to find out and specify the speed at which a control moves when the scrollbar found in the window, the internal window or the page moves. |
Password | ..Password can be used: - on the edit controls (or on the text table columns) to find out whether the control is a "Password" control or to modify the "Password" type of the control.
- on the connections (HFSQL Client/Server, OLE DB, etc.) to define the password of the user who is using the connection.
|
PeriodSelection | ..PeriodSelection is used to find out and indicate whether the user can select a period in a Scheduler control or in an Organizer control. |
Versions 09 and laterPlane Plane | ..Plane is used to:- Find out:
- the active plane of a window (or report) or the plane to which a control belongs.
- the active plane of a WEBDEV element.
- Modify:
- the active plane of a window (or report) or associate a control with another plane.
- the active plane of a WEBDEV element.
|
PopupMenu | ..PopupMenu is used to:- Find out the custom popup menu associated with a control or window.
- Modify the popup menu associated with a control or window (associate another popup menu with the control or window).
- Customize the system menus of controls by adding options.
|
Process | ..Process is used to modify the processes that must be run by the events available on a control, window, page, report, etc. |
ProgressBar | ..ProgressBar allows you to know and modify the Progress Bar control used when calculating a Pivot Table control (PVTCalculateAll and PVTCalculateUpdate). |
ProgressBarColor | ..ProgressBarColor is used to find out and modify the progression color (which means the color of the area that moves forward) in one of the following controls: - Progress Bar control,
- Progress Bar column,
- Progress Bar cell,
- infinite Progress Bar control.
|
ProgressBarSystem | ..ProgressBarSystem is used to find out and modify the progress bar used as system progress bar (in the taskbar) with Windows 7 (and later). |
Pushed | ..Pushed is used to find out and modify the state of an on/off button (pressed or not). |
Reduced | The ..Reduced property allows you to know if a Dockable Panel control is expanded/collapsed, or to switch between the two states. |
Resource | ..Resource is used to: - find out the resources visible in a Scheduler control.
- find out the resource of the Scheduler control corresponding to the specified subscript.
|
ResourceHeight | ..ResourceHeight is used to find out and modify the height of the resources in a Scheduler control where the resources are displayed in row. |
ResourceWidth | ..ResourceWidth is used to find out and modify the width of resources in a Scheduler control where the resources are displayed in column. |
ReturnedValue | ..ReturnedValue is used to:- Find out and modify the value returned by a window, a page or a report.
- Find out and modify the value returned by an option in a Radio Button control.
|
Ribbon | The ..Ribbon property is used to access the Ribbon control of the associated control (Word Processing, PDF Reader, Spreadsheet or Image Editor controls). |
RichEdit | ..RichEdit is used to manage the RTF type (Rich Text Format): - of an edit control or Static control found in a window.
- of a Static control found in a report.
|
RightClick | ..RightClick is used to find out and modify the name of the button that will be run when a right click is performed on an object. |
RightIndent | ..RightIndent is used to find out and modify the space left on the right of the text in a control. |
RightToLeft | ..RightToLeft is used to find out the actual writing direction, effective on a control, a column, a window or a report. |
RulerModifiable | ..RulerModifiable is used to: - Find out whether the ruler of a TimeLine control can be moved by the user.
- Make the ruler of a TimeLine control movable (or not) by the user.
|
RulerValue | ..RulerValue is used to find out and modify the position of a ruler in a TimeLine control. |
RulerVisible | ..RulerVisible is used to: - Find out whether a ruler is visible in a TimeLine control.
- Make a ruler visible or invisible in a TimeLine control.
|
RuleVisible | The Property RuleVisible allows to: - Find out whether the rulers are visible or invisible in a Word Processing control.
- Make the rulers visible or invisible in a Word Processing control.
|
ScreenCastAllowed | ..ScreenCastAllowed is used to: - find out whether the use can move the display of the Multimedia control onto an external device (compatible with Air Play),
- enable (or not) the ability to move the display of the Multimedia control onto an external device (compatible with Air Play.
|
ScreenCastInProgress | ..ScreenCastInProgress is used to find out whether the video played in a Multimedia control is currently played on an external device (compatible with Air Play). |
ScreenshotAllowed | The ScreenshotAllowed property is used to: - Determine whether it is possible to take screenshots of a window,
- Allow or prevent taking screenshots of a window.
|
Scroll | ..Scroll is used to find out and modify the scroll step in a Scrollbar or Range Slider control. |
ScrollValue | ..ScrollValue is used to manage the value of the scroll. |
ScrollWithFinger | ..ScrollWithFinger is used to: - Find out whether the content of a control can be moved with the finger ("scroll with finger").
- Allow (or not) a control to be handled with the finger.
|
SearchAAF | ..SearchAAF is used to: - find out whether the search via AAF is enabled on a non-editable Combo Box control,
- enable (or not) the search via AAF on a non-editable Combo Box control.
|
SearchValue | ..SearchValue is used to find out and modify the value of the search control in an Action Bar. |
SecurityHtml | ..SecurityHtml is used to find out and modify the status of the security mechanism of HTML edit controls. |
Selected | ..Selected is used to find out whether a row is selected (in a List Box control, a ListView control or a Table control) and to select a row (in a List Box control, a ListView control or a Table control). |
SelectedResource | ..SelectedResource returns the name of the resource corresponding to the selection made by the user in a Scheduler control. |
SelectedText | ..SelectedText is used to find out and modify the text selected in an edit control, an editable Combo Box or an editable table column. |
SelectedTextWithTag | ..SelectedTextWithTag is used to find out or modify the text selected in a rich edit control (in RTF or HTML format) with the HTML and RTF formatting tags. |
Selection | ..Selection is used to find out the characteristics of the selection (or cursor): - in the Word Processing control.
Remark: This selection is located in the section currently edited in the control (body, header or footer). - in the Spreadsheet control.
|
SelectionDirection | ..SelectionDirection is used to find out and modify the selection direction (left to right or right to left) in a Word Processing control. |
SelectionIfReadOnly | ..SelectionIfReadOnly is used to find out and indicate whether the content of an edit control can be selected when it is in read-only mode. |
SelectionLength | ..SelectionLength is used to find out and modify the length of the selection performed in a Word Processing control. |
ShapeExtremityEnd | ..ShapeExtremityEnd is used to find out and modify the type of shape used for the end extremity of a Wire control. |
ShapeExtremitySize | ..ShapeExtremitySize is used to find out and modify the size of the shape at the start and end extremities of a Wire control. |
ShapeExtremityStart | ..ShapeExtremityStart is used to find out and modify the type of shape used for the start extremity of a Wire control. |
ShortcutKey | ..ShortcutKey is used to find out and modify the keyboard shortcut associated with a control. |
Versions 11 and laterSize New in version 11Size Size | ..Size is used to find out and modify the size of an element. |
Sortable | ..Sortable is used to:- Find out whether a column of a Table control is sortable.
- Make a column of a Table control sortable or not.
|
Sorted | ..Sorted is used to:- Find out whether a control is sorted.
- Sort a control or not.
|
SortOption | ..SortOption is used to find out and modify the sort options used in:- the text columns found in Table controls,
- the text columns found in Treeview Table controls,
- the List Box and ListView controls,
- the Combo Box controls,
- the attributes of Looper controls,
- the images, the clickable images and the thumbnails with automatic scroll.
|
SourcePage | ..SourcePage is used to find out the source of an internal page (which means the internal page displayed by the Internal Page control). |
SourceWindow | ..SourceWindow is used to find out the source of an internal window (which means the internal window displayed by the Internal Window control). |
StartControl | ..StartControl is used to find out and modify the start control of a Wire control. |
StartDate | ..StartDate is used to find out and modify the start date of the period selected:- in a Calendar control.
- in an Organizer control.
- in a Scheduler control.
|
StartTotalRange | ..StartTotalRange is used to: - find out and modify the first displayable date or time in a Scheduler control or in a TimeLine control.
- modify the first displayable time in a TimeLine control.
|
StartVisibleRange | ..StartVisibleRange is used to: - find out and modify the first visible date or time in a Scheduler control or in a TimeLine control.
- modify the first visible time in a TimeLine control.
|
Versions 09 and laterState State | ..State is used to find out and modify the display state of an element. |
StatusBar | ..StatusBar is used to:- find out whether the status bar is displayed or not
- display (or not) the status bar of a window.
|
StoredItem | ..StoredItem is used to:- Find out the stored item or the stored variable of a Table, Looper, List Box or Combo Box control.
- Modify the stored item or the stored variable of a Table, Looper, List Box or Combo Box control.
|
StoredValue | ..StoredValue is used to find out the value currently stored by: - a row in a List Box, ListView or Combo Box control.
- a "Text token" edit control.
|
StoreFilterAAF | .. StoreFilterAAF is used to find out and specify whether the filters implemented by the user on a Table control or on a TreeView Table control are stored between 2 launches of the application. |
StoreSortAAF | .. StoreSortAAF is used to find out and specify whether the sort performed by the user on a Table control or on a Treeview Table control is stored between 2 startups of the application. |
StoreTheConfiguration | ..StoreTheConfiguration is used to: - Find out whether the configuration of the panes in a dynamic Tab control is automatically saved and restored.
- Modify the configuration of the panes in a dynamic Tab control so that it is automatically saved and restored (or not).
|
StoreTheValue | ..StoreTheValue is used to:- Find out whether a control keeps its value between two application starts via the persistence.
- Modify a control so that it keeps (or not) its value between two application starts via the persistence.
|
Versions 20 and laterStyle Style | ..Style is used to find out and assign the entire style of a control (including the overrides). |
SubCaption | ..SubCaption is used to find out and modify: - the secondary caption of an option found in a Radio Button or Check Box control.
- the secondary caption of an element found in a TreeMap control.
|
SwipeEnabled | ..SwipeEnabled enables or disables the management of the swipe gesture by the user: - on an Internal Window control.
- on a row in a Looper control.
|
SystemBarColor | ..SystemBarColor is used to find out and modify the color of the system bar in the maximized mobile windows. |
TabMDI | ..TabMDI is used to: - Find out the type of a Tab control (simple tab or dynamic tab - MDI).
- Modify the type of a Tab control (simple tab or dynamic tab - MDI).
This property is obsolete from version 200057. Use ..DynamicTab. |
TABOrder | ..TABOrder is used to find out and modify the position of a control in the tab order of a window. |
TestMode | ..TestMode is used to find out whether the ad displayed in the Ad control is a test ad. |
TextDirection | ..TextDirection is used to find out and modify the writing direction used in a window, in a report or in a control (useful for managing languages such as Arabic or Hebrew). |
TextProgressBar | ..TextProgressBar is used to find out and modify the text displayed in a progress bar. |
TextWithoutFormat | ..TextWithoutFormat is used to retrieve the text found in a rich edit control without formatting tags. |
Thumbnail | ..Thumbnail is used to find out and modify the image displayed as a thumbnail in a Thumbnail control. |
Versions 26 and laterTilt New in version 26Tilt Tilt | The Tilt property is used to determine or modify the tilt of the map displayed in a Map control. |
Timeout | ..Timeout is used to find out and modify the timeout after which the connection will be considered as "having failed". This timeout is taken into account when using StreamConnect and ..Address. |
Versions 09 and laterTitle Title | ..Title is used to:- Find out the title of a table column, Chart control, window or page
- Modify the title of a table column, Chart control, window or page.
|
TitleBackgroundColor | ..TitleBackgroundColor is used to find out and modify the background color of a column title in a Table or TreeView Table control |
TitleColor | ..TitleColor is used to: - find out the text color for the title of a column found in a Table control.
- modify the text color for the title of a column (or all columns) found in a Table control.
|
TitleHeader | ..TitleHeader is used to: - Find out the title and aspect of column title-header (Table or TreeView Table control).
- Find out the number of column title-headers (Table or TreeView Table control).
- Modify the title and aspect of column title-header (Table or TreeView Table control).
|
TitleHeight | ..TitleHeight is used to find out and modify : - the height of the title for the columns of a Table or TreeView Table control.
- the height of the title bar of a Dockable Panel control.
|
TitleImage | ..TitleImage is used to find out and/or modify the image displayed beside the title of a column in a Table control. |
Versions 24 and laterToken Token | ..Token allows you to manage the different tokens associated with a "Text token" edit control. |
TokenAllowDuplicate | ..TokenAllowDuplicate allows: - Authorizing (or not) the input of duplicates in a "Text token" edit control.
- Finding out if duplicates are allowed in a "Text token" edit control.
|
TokenCurrentInput | ..TokenCurrentInput allows you to read or modify the value being entered in a "Text token" edit control. |
TokenDeletable | ..TokenDeletable allows: - Finding out whether the end user is allowed (or not) to delete tokens in a "Text token" edit control.
- Authorizing (or not) the end user to delete tokens in a "Text token" edit control.
|
TokenEnabled | ..TokenEnabled allows you to know if an edit control is a "Text token" edit control. |
TokenListSeparator | ..TokenListSeparator retrieves or modifies the separators that trigger the creation of new tokens when entering information in a "Text token" edit control. |
ToolbarVisible | ..ToolbarVisible is used to: - Find out whether the control ribbon is displayed.
- Display (or not) a ribbon for the control.
|
ToolTip | ..ToolTip is used to find out and modify the text displayed in the tooltip associated with a control found in a window or in a page. |
ToolTipTitle | ..ToolTipTitle is used to find out and modify the text displayed in the tooltip associated with the title of a table column. This tooltip is displayed when the title of table column is hovered by the mouse cursor. |
TotalNbChildren | ..TotalNbChildren returns the total number of children in a branch: - of a Treeview control,
- of a TreeView Table control.
|
TotalRange | ..TotalRange is used to find out and modify the total number of data represented by the Range Slider control. |
TotalsEnabled | ..TotalsEnabled is used to:- Find out the operating mode of column calculations (automatic or custom) for a Table or TreeView Table control,
- Temporarily forbid or force the column calculations (automatic or custom) in a Table or TreeView Table control.
|
TrafficInfo | The TrafficInfo property is used to: - determine whether traffic information is displayed in the Map control.
- display or hide traffic information in the Map control.
|
TransparencyMode | ..TransparencyMode is used to find out and modify the transparency mode of an image. |
TriState | ..TriState is used to:- Find out whether an option found in a check box supports 3 states or 2 states.
- Find out whether a treeview control supports 3 states or 2 states type checkmarks.
- Modify the type of an option found in a check box: option with 3 states or with 2 states.
|
Versions 09 and laterType New in version 09Type Type | ..Type is used to find out:- the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
- the type of object.
- the type of value stored in a variant.
|
TypeFiles | ..TypeFiles is used to find out and modify the filter on the files proposed in the file picker of Upload control. |
UndockablePane | ..UndockablePane is used to: - Find out whether the panes of a dynamic Tab control can be moved outside the window by the end user.
- Allow (or not) the panes of a dynamic Tab control to be moved outside the window by the end user.
|
Unicode | ..Unicode is used to:- Find out whether the value of a control is a Unicode string.
- Specify whether the value of a control is a Unicode string.
|
UpperValue | ..UpperValue is used to: - Find out the upper bound of the interval currently selected in a Range Slider control.
- Modify the upper bound of the interval currently selected in a Range Slider control.
|
Versions 09 and laterURL New in version 09URL URL | ..URL is used to:- Find out the address associated with a control.
- Modify the address associated with a control.
|
UsefulHeight | ..UsefulHeight is used to find out and modify the useful height of an internal window, window or supercontrol with scrollbars. |
UsefulWidth | ..UsefulWidth is used to find out and modify the useful width of an internal window (or supercontrol) with scrollbars. |
UseMode | The Property ModeManipulation allows to know or modify the champ PDF Reader handling mode via the mouse. The mouse is used to select text in the document or to move within the document pages. |
Versions 09 and laterValue Value | ..Value is used to:- Find out and modify the value of a report control.
- Find out and modify the value of a control or the title of a window.
- Find out the identifier of a stream.
- Find out and modify the value of a control or the title of a page.
|
ValuePerStar | ..ValuePerStar is used to find out and modify the value of a star in a Rating control. |
Vertical | The Property Vertical allows to:- find out whether a control is oriented horizontally or vertically.
- modify the display direction of Table and Looper controls (switch from vertical to horizontal and conversely).
|
VerticalAlignment | The Property CadrageVertical makes it possible to know and modify the vertical framing of an control. |
VerticalOrientation | ..VerticalOrientation is used to:- Find out the orientation of a ListView control.
- Modify the orientation of a ListView control.
|
VerticalSwipe | ..VerticalSwipe is used to find out and modify the swipe direction in an internal window with swipe. |
Visible | ..Visible is used to:- Find out whether an element is visible.
- Make an element visible or invisible.
|
VisibleInExportAndPrint | ..VisibleInExportAndPrint is used to: - Find out whether a column of a Table or TreeView Table control is visible for export and printing.
- Modify the visibility of a column in a Table or TreeView Table control for export and printing.
|
VisibleOutsideWindow | VisibleOutsideWindow is used to: - find out whether a button is visible even if its position (X,Y) places it outside the border of the window (entirely or partially).
- modify the visibility of an "off-window" button.
|
VisibleRange | ..VisibleRange is used to find out and modify the width of the scrollbar box in a Range Slider control. |
VisualEffect | ..VisualEffect is used to manage a visual effect on a control or on a group of controls found in a window. |
WayPoint | ..WayPoint is used to find out and modify the mandatory way points for a Wire control. |
Weight | ..Weight is used to manage the weight of an element found in a TreeMap control. |
Versions 09 and laterWidth Width | ..Width is used to find out and modify the width:- of a control or block in a report.
- of a control (found in a window), window, column found in a table or column found in a list box (including listview).
- of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
|
WindowIfNew | ..WindowIfNew is used to find out and modify the name of internal window to open if the end user opens a new pane in a dynamic Tab control. |
WinEditAllowed | ..WinEditAllowed is used to find out and modify the operations allowed on a control when the window switches to the mode "Modification of UI by the end user". |
WinEditMode | ..WinEditMode is used to find out and modify the actions allowed on the window and its controls when the window switches to the mode "Modification of UI by the end user". |
WithClosingButton | ..WithClosingButton is used to: - Find out whether all panes of a dynamic tab include a closing cross.
- Configure all panes of a dynamic tab in order to display a closing cross.
|
WithInput | ..WithInput is used to find out whether a Combo Box control is editable (or not) and to modify this status. |
WithNewButton | ..WithNewButton is used to: - Find out whether a dynamic Tab control proposes an addition cross.
- Configure a dynamic Tab control so that it proposes (or not) an addition cross.
|
WithRotation | The WithRotation property is used to: - enable or disable the rotate gesture on a Map control,
- determine whether the rotate gesture is enabled on a Map control.
|
WithScroll | The WithScroll property is used to: - enable or disable the scroll gesture on a Map control,
- determine whether the scroll gesture is enabled on a Map control.
|
WithTilt | The WithTilt property is used to: - enable or disable the tilt gesture on a Map control,
- determine whether the tilt gesture is enabled on a Map control.
|
WithZoom | The WithZoom property is used to specify and to determine whether the user can zoom in and out: - in an HTML control in an Android, iPhone or iPad application.
- in a map displayed in a Map control in an Android, iPhone or iPad application.
|
WorkingDirectory | Récupère ou modifie le répertoire utilisé par le champ éditeur Html pour stocker les images d’une page. |
WorkingHourEnd | ..WorkingHourEnd is used to find out and modify the end time of the working hours used:- by an Organizer control.
- by a Scheduler control.
- by a Gantt Chart column (in a Table or TreeView Table control).
|
WorkingHourStart | ..WorkingHourStart is used to find out and modify the start time of the working hours used: - by an Organizer control.
- by a Scheduler control.
- by a Gantt Chart column (in a Table or TreeView Table control).
|
WorksheetName | ..WorksheetName is used to find out and modify the name of the current worksheet in a Spreadsheet control. |
Versions 09 and laterX New in version 09X X | ..X is used to:- Find out the X coordinate of a control, of a Table control column or of a window (position on X axis).
- Modify the X coordinate of a control or window (position on X axis).
|
XAxisMax | ..XAxisMax is used to find out the upper bound on the X axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed. |
XAxisMin | ..XAxisMin is used to find out the lower bound on the X axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed. |
XImage | ..XImage is used to find out and modify the origin (X coordinate) of the image section that will be displayed in an image control or in the background of a chart control. |
XInitial | ..XInitial is used to:- Find out the X coordinate:
- of a control (position on X axis) when opening the window or the page.
- of a window (position on X axis) when opening the window.
- Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
- Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report.
|
Versions 09 and laterY New in version 09Y Y | ..Y is used to:- Find out the Y coordinate of a control or window (position on Y axis).
- Modify the Y coordinate of a control or window.
|
YAxisMax | ..YAxisMax is used to find out the upper bound on the Y axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed. |
YAxisMin | ..YAxisMin is used to find out the lower bound on the Y axis for a Chart control. |
YImage | ..YImage is used to find out and modify the origin (Y coordinate) of the image section that will be displayed in an Image control or in the background of a Chart control. |
YInitial | ..YInitial is used to:- Find out the Y coordinate:
- of a control (position on Y axis) when opening the window or the page.
- of a window (position on Y axis) when opening the window.
- Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
- Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
|
ZAxisMax | ..ZAxisMax is used to find out the upper bound of altitudes (Z axis) for a Chart control (Surface chart). |
ZAxisMin | ..ZAxisMin is used to find out the lower bound of altitudes (Z axis) for a Chart control (Surface chart). |
Versions 12 and laterZoom New in version 12Zoom Zoom | ..Zoom allows you to find out and modify the zoom value used: - in an Image control.
- in a Map control.
- in an Organization Chart control.
- in a Table, TreeView Table, Pivot Table, Spreadsheet or List Box control.
- in a Word Processing control.
- in a PDF Reader control.
- in a window.
|
ZoomWithFinger | ..ZoomWithFinger is used to: - find out whether an Image control allows the zoom with finger.
- allow (or not) the zoom with finger in an Image control.
|
ZOrder | ..ZOrder is used to manage the z-order position of a control. |