Properties associated with the Word Processing control

ONLINE HELP
WINDEV, WEBDEV AND WINDEV MOBILE

Version:

Home | Sign in | English

Help

Editors

Controls (window/page/report)

Controls

Word Processing control

Properties associated with the Word Processing control

Overview

Properties available in a window

See also

The Word Processing control

Properties associated with the Word Processing control

Overview

A Word Processing control can be handled in a window by the following WLanguage properties.

Properties available in a window

The following properties are associated with the Word Procesing controls:


Versions 09 and later Anchor New in version 09 Anchor Anchor	The Anchor property is used to set the anchors of a control in a window, page or report.
Versions 09 and later AnchorRateBottom New in version 09 AnchorRateBottom AnchorRateBottom	The AnchorRateBottom property is used to: Find out the anchor rate when a control moves on the vertical axis. Modify the anchor rate when a control moves on the vertical axis.
Versions 09 and later AnchorRateHeight New in version 09 AnchorRateHeight AnchorRateHeight	The AnchorRateHeight property is used to: Find out the vertical anchor rate of a control. Modify the vertical anchor rate of a control.
Versions 09 and later AnchorRateRight New in version 09 AnchorRateRight AnchorRateRight	The AnchorRateRight property is used to: Find out the anchor rate when a control moves on the horizontal axis. Modify the anchor rate when a control moves on the horizontal axis.
Versions 09 and later AnchorRateWidth New in version 09 AnchorRateWidth AnchorRateWidth	The AnchorRateWidth property is used to: Find out the anchor rate when a control (or a table column) stretches on the horizontal axis. Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
Versions 11 and later AutomaticLink New in version 11 AutomaticLink AutomaticLink	The AutomaticLink property is used to: determine if the automatic link detection mode is enabled, enable or disable the automatic link detection mode.
Versions 11 and later CheckSpell New in version 11 CheckSpell CheckSpell	The CheckSpell property is used to enable or disable the automatic spelling checker.
Versions 09 and later Cursor New in version 09 Cursor Cursor	The Cursor property is used to get and change the position of the mouse cursor in one of the following controls: Edit control. Editable Combo Box. "Edit control" table column and "Editable Combo Box" table column. Word Processing control. HTML Editor control.
Versions 09 and later CursorEnd New in version 09 CursorEnd CursorEnd	CursorEnd is used to find out and modify the end position of selection of the mouse cursor in one of the following controls: Edit control. Editable Combo Box. "Edit control" table column and "Editable Combo Box" table column. Word Processing control.
Versions 09 and later DataBinding New in version 09 DataBinding DataBinding	The DataBinding property is used to identify and change the binding between a control and: an item in a data file. a variable. several variables.
Versions 26 and later DefaultFilePath New in version 26 DefaultFilePath DefaultFilePath	The DefaultFilePath property is used to get and set the full name of the file (path and file name) proposed by default when a user selects the "Save as" option in a Word Processing or HTML Editor control.
Versions 24 and later DisplayBookmarks New in version 24 DisplayBookmarks DisplayBookmarks	The DisplayBookmarks property is used to: identify the display mode of bookmarks in a Word Processing control. show or hide bookmarks in a Word Processing control.
Versions 22 and later DisplayControlCharacters New in version 22 DisplayControlCharacters DisplayControlCharacters	The DisplayControlCharacters property is used to: Find out whether the display of control characters is enabled in a Word Processing control. Enable (or not) the display of control characters in a Word Processing control.
Versions 09 and later DisplayEnabled New in version 09 DisplayEnabled DisplayEnabled	The DisplayEnabled property is used to: find out whether the display of a control or window is enabled or not. If the display is enabled, the content of the control is refreshed on a regular basis. enable (or not) the display of a control or window.
Versions 23 and later DisplayMode New in version 23 DisplayMode DisplayMode	The DisplayMode property is used to get and change the display mode of a Word Processing or PDF Reader control.
Versions 09 and later Empty New in version 09 Empty Empty	Empty is used to find out whether: a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control. a Chart control contains no series. a report control is empty (control linked to an item). an array (or an associative array) contains no element. an element of an associative array exists or not. a queue, a list or a stack contains no element.
Versions 23 and later FilePath New in version 23 FilePath FilePath	The FilePath property is used to identify: the name of the xlsx file associated with a Spreadsheet control. This name is initialized by SpreadsheetLoad and SpreadsheetSave. the name of the file associated with an Image Editor control. This name is initialized by PicOpen and PicSave. the name of the PDF file associated with a PDF Reader control. This name is initialized by PDFReaderOpen. the name of the DOCX file associated with a Word Processing control. This name is initialized by DocOpen and DocSave.
Versions 25 and later FormattingMarksColor New in version 25 FormattingMarksColor FormattingMarksColor	The FormattingMarksColor property is used to: get the color of the formatting marks in a Word Processing control. change the color of the formatting marks in a Word Processing control.
Versions 09 and later FullName New in version 09 FullName FullName	The FullName property is used to find out the full name: of a control. of a window. of a menu option. of a table column.
Versions 17 and later Grayed New in version 17 Grayed Grayed	The Grayed property is used to: Determine if a control (or a group of controls) is grayed out. Gray out or ungray a control, a group of controls or a window.
Versions 09 and later Group New in version 09 Group Group	The Group property is used to: find out whether the control belongs to a group of controls. If the control belongs to one or more groups, the Group property can be used to identify these groups of controls. associate a control with a group of controls.
Versions 09 and later Height New in version 09 Height Height	The Height property is used to get and change the height: of a control or block in a report. of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control. of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
Versions 27 and later HideWhileScrolling New in version 27 HideWhileScrolling HideWhileScrolling	The HideWhileScrolling property is used to: Determine if the pinned control is hidden while scrolling, Show or hide the pinned control while scrolling.
Versions 23 and later HTMLEdit New in version 23 HTMLEdit HTMLEdit	The HTMLEdit property is used to: find out whether a Word Processing control is displayed in optimized mode for HTML editing, modify a Word Processing control to display it (or not) in optimized mode for HTML editing.
Versions 09 and later InitialHeight New in version 09 InitialHeight InitialHeight	The InitialHeight property is used to: Find out the creation height of a control or window. Modify the base height used to anchor the controls "in height". Find out the creation height of a block or control in a report.
Versions 09 and later InitialState New in version 09 InitialState InitialState	The InitialState property is used to get the initial state of a control.
Versions 09 and later InitialValue New in version 09 InitialValue InitialValue	The InitialValue property is used to get the initial value of a control in a window or page.
Versions 09 and later InitialVisible New in version 09 InitialVisible InitialVisible	The InitialVisible property is used to determine if: a control was visible during the first display of the associated window or page. a window was visible during its first display.
Versions 09 and later InitialWidth New in version 09 InitialWidth InitialWidth	The InitialWidth property is used to: Find out the initial width of a control or window. Modify the base width used to anchor the controls in "width". Find out the initial width of a report control.
Versions 17 and later InputEnabled New in version 17 InputEnabled InputEnabled	The InputEnabled property is used to: Determine if a control or a group of controls is editable or read-only. Change the input options for a control or group of controls.
Versions 09 and later MaxHeight New in version 09 MaxHeight MaxHeight	The MaxHeight property is used to get and change the maximum height of a control or window.
Versions 09 and later MaxWidth New in version 09 MaxWidth MaxWidth	The MaxWidth property is used to get and change the maximum width of a control or window.
Versions 09 and later MinHeight New in version 09 MinHeight MinHeight	The MinHeight property is used to get and change the minimum height of a control or window.
Versions 09 and later MinWidth New in version 09 MinWidth MinWidth	The MinWidth property is used to get and change the minimum width of a control or window.
Versions 09 and later Modified New in version 09 Modified Modified	The Modified property is used to determine if a control or group of controls has been modified by the user (keyboard or mouse input).
Versions 09 and later Name New in version 09 Name Name	The Name property is used to get: the name of the font associated with a Font variable. the name of a control, report or report block. the name of a control, group of controls or window. the name of a control, group of controls or page.
Versions 09 and later NewLine New in version 09 NewLine NewLine	The New property is used to determine: in a Table control, whether the current row was created by TableAddXXX or TableInsertXXX. in a Looper control, whether the current row was created by LooperAddXXX or LooperInsertXXX. in an Organizer control, whether an appointment was created via the popup menu. in a Scheduler control, whether an appointment was created via the popup menu.
Versions 09 and later Note New in version 09 Note Note	The Note property is used to: Find out the notes associated with a control, a window, a page or a report. Modify the notes associated with a control, a window a page or a report.
Versions 09 and later NoteTitle New in version 09 NoteTitle NoteTitle	The NoteTitle property is used to: Get the title of the notes used in the technical documentation of a control, window, page or report. Change the title of the notes used in the technical documentation of a control, window, page or report.
Versions 23 and later NumberAccessiblePages New in version 23 NumberAccessiblePages NumberAccessiblePages	The NumberAccessiblePages property is used to get the number of pages currently loaded in a PDF Reader or Word Processing control.
Versions 23 and later NumberDisplayedPage New in version 23 NumberDisplayedPage NumberDisplayedPage	The NumberDisplayedPage property is used to identify and change the number of the page currently displayed in the PDF Reader or Word Processing control.
Versions 09 and later NumberPage New in version 09 NumberPage NumberPage	The NumberPage property is used to get: the number of pages in a "multi-page" image file. This image is displayed in an Image control or in the background of a Chart control. the number of pages in a PDF file displayed in an Image control. the number of pages found in a PDF file displayed in a PDF Reader control. the number of pages found in a DOCX file displayed in a Word Processing control.
Versions 19 and later Pane New in version 19 Pane Pane	The Pane property is used to: Find out the pane tabs associated with a control. Define the pane tabs associated with a control.
Versions 27 and later Pinned New in version 27 Pinned Pinned	The Pinned property is used to: Pin a control: the position of the pinned control will be relative to the visible area of its container and not to the content area. Determine if a control is pinned.
Versions 09 and later Plane New in version 09 Plane Plane	Plane is used to: Get: the active plane of a window (or report) or the plane to which a control belongs. the active plane of a WEBDEV element. Change: the active plane of a window (or report) or associate a control with another plane. the active plane of a WEBDEV element.
Versions 19 and later Process New in version 19 Process Process	The Process property is used to modify the processes to be executed by the events available on a control, window, page, report, etc.
Versions 24 and later Ribbon New in version 24 Ribbon Ribbon	The Ribbon property is used to access the Ribbon control of the associated control (Word Processing, PDF Reader, Spreadsheet, Image Editor or HTML Editor controls).
Versions 22 and later RuleVisible New in version 22 RuleVisible RuleVisible	The RuleVisible property is used to: Find out whether the rulers are visible or invisible in a Word Processing control. Make the rulers visible or invisible in a Word Processing control.
Versions 22 and later Selection New in version 22 Selection Selection	The Selection property is used to get the characteristics of the selection (or cursor): in the Word Processing control. Remark: This selection is in the section being edited in the control (body, header or footer). in the Spreadsheet control. in the HTML Editor control.
Versions 22 and later SelectionDirection New in version 22 SelectionDirection SelectionDirection	The SelectionDirection property is used to determine and change the selection direction (left to right or right to left) in a Word Processing control.
Versions 22 and later SelectionLength New in version 22 SelectionLength SelectionLength	The SelectionLength property is used to get and change the length of the selection made in a Word Processing control.
Versions 09 and later State New in version 09 State State	The State property is used to get and change the state of an element.
Versions 09 and later TABOrder New in version 09 TABOrder TABOrder	The TABOrder property is used to get and change the position of a control in the tab order of a window.
Versions 20 and later ToolbarVisible New in version 20 ToolbarVisible ToolbarVisible	The ToolbarVisible property is used to: know if the toolbar or the ribbon is displayed in a control. show or hide the toolbar or the ribbon in a control.
Versions 09 and later Type New in version 09 Type Type	The Type property is used to get: the type of element described through programming (file or item description) or not (file or item defined in the data model editor, view or query). the type of object. the type of value stored in a variant.
Versions 09 and later Value New in version 09 Value Value	The Value property is used to: Find out and modify the value of a report control. Find out and modify the value of a control or the title of a window. Find out the identifier of a stream. Find out and modify the value of a control or the title of a page.
Versions 09 and later Visible New in version 09 Visible Visible	The Visible property is used to: Find out whether an element is visible. Make an element visible or invisible.
Versions 26 and later VisibleWithAnimation New in version 26 VisibleWithAnimation VisibleWithAnimation	The VisibleWithAnimation property is used to make a control visible or invisible via the "Appear/Disappear" animation.
Versions 09 and later Width New in version 09 Width Width	Width is used to find out and modify the width: of a control or block in a report. of a control (found in a window), window, column found in a table or column found in a list box (including listview). of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
Versions 09 and later X New in version 09 X X	The X property is used to: Get the X-coordinate of a control, Table control column or window (position on the X-axis). Get the X-coordinate of a control or window (position on the X-axis).
Versions 09 and later XInitial New in version 09 XInitial XInitial	The XInitial property is used to: Get the X-coordinate: of a control (position on the X-axis) when opening the window or the page. of a window (position on X-axis) when opening the window. Change the X-coordinate of a control anchored "to the right" (position on the X-axis) when opening the window. Get the X-coordinate of a control in relation to its block (position in millimeters on the X-axis) when opening the report.
Versions 09 and later Y New in version 09 Y Y	The Y property is used to: Find out the Y-coordinate of a control or window (position on Y-axis). Modify the Y-coordinate of a control or window.
Versions 09 and later YInitial New in version 09 YInitial YInitial	The YInitial property is used to: Find out the Y-coordinate: of a control (position on Y axis) when opening the window or the page. of a window (position on Y axis) when opening the window. Modify the Y-coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window. Find out the Y-coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
Versions 12 and later Zoom New in version 12 Zoom Zoom	The Zoom property is used to get or change the zoom value: in an Image control. in a Map control. in an Organization Chart control. in a Table, TreeView Table, Pivot Table, Spreadsheet or List Box control. in a Word Processing control. in a PDF Reader control. in a Camera control. in a window.
Versions 09 and later ZOrder New in version 09 ZOrder ZOrder	The ZOrder property is used to manage the z-order of an element.