| |
Accessibility | The Accessibility property gets and sets the accessibility properties of a control. |
Anchor | The Anchor property sets the anchors of a control in a window, page or report. |
AnchorRateBottom | The AnchorRateBottom property is used to:- Find out the anchor rate when a control moves on the vertical axis.
- Modify the anchor rate when a control moves on the vertical axis.
|
AnchorRateHeight | The AnchorRateHeight property is used to:- Find out the vertical anchor rate of a control.
- Modify the vertical anchor rate of a control.
|
AnchorRateRight | The AnchorRateRight property is used to:- Find out the anchor rate when a control moves on the horizontal axis.
- Modify the anchor rate when a control moves on the horizontal axis.
|
AnchorRateWidth | The AnchorRateWidth property is used to:- Find out the anchor rate when a control (or a table column) stretches on the horizontal axis.
- Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
|
AnchorToContent | The AnchorToContent property determines and changes how the control adapts to its content. |
| The Autofill property indicates the type of information to be automatically entered in an Edit control. |
AutoLineWrap | The AutoLineWrap property is used to: - determine if the automatic line wrap feature is enabled in a multiline Edit control, in a column of a Table or TreeView control or in a row header of a Pivot Table control.
- set the line wrap mode in a multiline Edit control, in a column of a Table or TreeView control or in a row header of a Pivot Table control.
|
AutomaticErase | The AutomaticErase property is used to:- find out whether an edit control is in "Automatic erase" mode.
- modify the "Automatic erase" characteristic of an edit control.
|
AutomaticLink | The AutomaticLink property is used to: - determine if the automatic link detection mode is enabled,
- enable or disable the automatic link detection mode.
|
BackgroundColor | The BackgroundColor property is used to set the background color of a control, window, page or block of a report. |
BackgroundImage | The BackgroundImage property is used to identify and modify the background color of an element: window, page, control or report. |
Border | The Border property is used to get and change the characteristics of the borders: - for a report control or block.
- for a window control.
- for a cell of a Table control.
|
BottomIndent | The BottomIndent property gets and sets the space at the bottom of the text (bottom margin) in a control. |
CalculatorButton | The CalculatorButton property is used to determine and indicate whether a Numeric or Currency Edit control has a button to display a popup calculator. |
CalendarButton | The CalendarButton property is used to determine and specify whether a Date Edit control has a button to display a popup calendar. |
Caption | In a database, the Caption property is used to:- Find out the caption associated with a file item.
- Find out the caption associated with a data file.
- Find out and modify the connection caption.
In a report, the Caption property is used to: - Find out the text displayed in a Static or Link control.
- Modify the text displayed in a Static or Link control.
In a window or page, the Caption property is also used to: - Find out and modify the caption of a control in a window or in a page.
- Find out and modify the caption of a menu option.
- Find out and modify the title of a window or page.
- Find out the content of a Breadcrumb control.
|
CaptionWidth | The CaptionWidth property is used to get and change the width reserved for the text area in an Edit or Combo Box control. |
CheckSpell | The CheckSpell property is used to enable or disable the automatic spelling checker. |
Color | The Color property is used to get or change the font color for:- a Font variable.
- a text displayed in a Static control or in a calculated control of a report.
- a text displayed in a window control.
- a text displayed in a page control.
|
ContextMenu | The ContextMenu property is used to:- Get the custom context menu of a control, window or page.
- Change the custom context menu of a control, window or page (or associate another context menu).
- Customize the system menus of the controls by adding options.
|
Cursor | The Cursor property gets and sets the position of the mouse cursor in one of the following controls:- Edit control.
- Editable Combo Box.
- "Edit control" table column and "Editable Combo Box" table column.
- Word Processing control.
- HTML Editor control.
- Code Editor control.
|
CursorEnd | The CursorEnd property gets and sets the end position of the mouse selection range in the following controls:- Edit control.
- Editable Combo Box.
- "Edit control" column and "Editable Combo Box" column in a Table control.
- Word Processing control.
- Code Editor control.
|
DataBinding | The DataBinding property is used to identify and change the binding between a control and:- an item in a data file.
- a variable.
- several variables.
|
DeleteButton | The DeleteButton property allows you to determine if there is an automatic delete button in a Text Edit control, and to change its position. |
DisplayAsMarkdown | The DisplayAsMarkdown property indicates whether or not an Edit control displays its content in Markdown format. |
DisplayCurrency | The DisplayCurrency property gets and sets the currency used when entering or displaying values in a "Currency + Euro" control. |
DisplayedValue | The DisplayedValue property returns the value currently displayed in the control of a window or page. |
DisplayEnabled | The DisplayEnabled property is used to:- determine whether or not a control or window is refreshed. If the control is displayed, its content is refreshed regularly.
- refresh a control or window.
|
DisplayFormat | The DisplayFormat property gets and sets the expected display format for a given text: plain text, RTF or Markdown. |
DisplayMask | The DisplayMask property is used to: - Find out the display mask.
- Modify the display mask.
This display mask is displayed when the control is in read-only or when the control does not have focus. |
DndSource | The DndSource property is used to determine and change a control's drag-and-drop behavior. |
DndTarget | The DndTarget property determines and changes how a control behaves in a drag-and-drop operation. |
Ellipsis | The Ellipsis property is used to determine and change the truncation mode with ellipses in: - a window control (Static, edit control, List box, Button, Combo box or Static table column).
- a Static control in a report.
|
EmptyIfZero | The EmptyIfZero property is used to: - Find out the management mode of zero value in a control.
- Modify the management mode of zero value in a control
|
Extra | The Extra property is used to:- Get additional information about a control, window, or page.
- Edit additional information of a control, window or page.
|
FileFilter | The FileFilter property gets and sets the filter used to display files: - when using assisted input in an Edit control or table column with the "File path autocomplete" option (in the "General" tab of the description window),
- in the file picker displayed when the user selects the "Browse..." option in the context menu of an Edit control, table column or Combo Box control.
|
FlexAlignSelf | The FlexAlignSelf property gets and sets the alignment of an item along the cross axis of a Flexbox control (corresponding CSS property: "align-self"). |
FlexGrow | The FlexGrow property gets and sets the grow factor of an item in a line of a Flexbox control. |
FlexShrink | The FlexShrink property gets and sets the shrink factor of an item in a line of a Flexbox control. |
Font | The Font property is used to- Get the identifier of the font used in a control in a report, page or window.
- Change the font used in a control in a report, page or window.
|
FontBold | The FontBold property is used to:- Determine if the text is bold.
- Change the weight of the text.
|
FontCharset | The FontCharset property is used to:- Find out the character set used by the screen fonts of a control.
- Modify the character set used by the screen fonts of a control.
|
FontCondensed | The FontCondensed property is used to:- Determine if characters in a text are condensed.
- Condense (or not) the characters in a text.
|
FontExtended | The FontExtended property is used to:- Find out whether the spacing between characters in a text is increased.
- Increase the spacing between characters in a text.
|
FontItalic | The FontItalic property is used to:- Determine if the text is italicized.
- Apply or remove italic formatting from the text.
|
FontLarge | The FontLarge property is used to:- Determine if the text is expanded.
- Expand the text.
|
FontName | The FontName property is used to:- Identify the font used in a control.
- Change the font used in a control.
|
FontSize | The FontSize property is used to:- Identify the size of the font used in a control.
- Change the size of the font used in a control.
|
FontStrikeOut | The FontStrikeOut property is used to:- Determine if the text displayed is struck through.
- Apply strikethrough formatting (or not) the text displayed in a control.
|
FontUnderlined | The FontUnderlined property is used to:- Determine if the text is underlined.
- Underline (or not) a text.
|
FullName | The FullName property is used to find out the full name:- of a control.
- of a window.
- of a menu option.
- of a table column.
|
Grayed | The Grayed property is used to: - Determine if a control (or a group of controls) is grayed out.
- Gray out or ungray a control, a group of controls or a window.
|
Group | The Group property is used to: - find out whether the control belongs to a group of controls. If the control belongs to one or more groups, the Group property can be used to identify these groups of controls.
- associate a control with a group of controls.
|
HandwrittenInput | The HandwrittenInput property is used to manage stylus or mouse input (Windows XP Tablet PC or Windows Vista, respectively). |
Height | The Height property is used to get and change the height:- of a control or block in a report.
- of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control.
- of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
- of a break cell in a Table or Looper control.
|
HelpNumber | The HelpNumber property is used to identify and modify the help number associated with a control. |
HideWhileScrolling | The HideWhileScrolling property is used to:- Determine if the pinned control is hidden while scrolling,
- Show or hide the pinned control while scrolling.
|
Hint | The Hint property gets and sets the hint text displayed when the Edit control is empty. |
HintTextColor | The HintTextColor property gets and sets the hint text color of an Edit control. |
HorizontalAlignment | The HorizontalAlignment property gets and changes the horizontal alignment of a control. |
HtmlFormat | The HtmlFormat property is used to:- find out whether an edit control accepts the input in HTML format.
- modify the input format of an edit control.
|
InitialHeight | The InitialHeight property is used to:- Find out the creation height of a control or window.
- Modify the base height used to anchor the controls "in height".
- Find out the creation height of a block or control in a report.
|
InitialState | The InitialState property gets the initial state of a control. |
InitialValue | The InitialValue property is used to get the initial value of a control in a window or page. |
InitialVisible | The InitialVisible property is used to determine if:- a control was visible during the first display of the associated window or page.
- a window was visible during its first display.
|
InitialWidth | The InitialWidth property is used to:- Find out the initial width of a control or window.
- Modify the base width used to anchor the controls in "width".
- Find out the initial width of a report control.
|
InputEnabled | The InputEnabled property is used to: - Determine if a control or a group of controls is editable or read-only.
- Change the input options for a control or group of controls.
|
InputMask | The InputMask property is used to:- get the input mask.
- set the input mask (from the masks available for the type).
|
InputType | The InputType property is used to identify or change the type of input supported by a control: Duration, Date, Numeric, etc. |
| The InvalidInput determines if a control prevents the user from leaving when they enter invalid data. |
InvalidInputMessage | The InvalidInputMessage property gets and sets the message that will be displayed if the control contains invalid data (input mask or value out of bounds). |
LeftButton | The LeftButton property gets and sets the characteristics of a button located on the left side of an Edit control. |
LeftIndent | The LeftIndent property is used to get and change the space to the left of the text in a control. |
MandatoryInput | The MandatoryInput property is used to determine if a control is required and to enable or disable the required data input. |
MandatoryInputMessage | The MandatoryInputMessage property is used to identify and set the message that will be displayed if the control is left empty (when the MandatoryInput property is enabled). |
Markdown | The Markdown property is used to enable or disable Markdown formatting in the controls of a window or a report. |
MaxHeight | The MaxHeight property is used to get and change the maximum height of a control or window. |
MaxValue | The MaxValue property is used to:- get and set the top value of a report based on a data file.
- get the maximum value of the current filter.
- get the maximum value of a data series in a chart.
- get and set the maximum value for some types of controls.
|
MaxWidth | The MaxWidth property is used to get and change the maximum width of a control or window. |
MemoryCurrency | The MemoryCurrency property gets and sets the currency used when manipulating a "Currency + Euro" control programmatically. |
MemoryFormat | The MemoryFormat property is used to get and change the format of the value returned for:- Date or Time edit controls.
- Date or Time table columns.
- Calendar controls.
- Static controls.
- editable combo boxes.
- table columns displayed by combo boxes.
|
Message | The Message property is used to:- Find out the help message associated with a control or with a menu option (in a window).
- Modify the help message associated with a control or with a menu option (in a window).
|
MinHeight | The MinHeight property is used to get and change the minimum height of a control or window. |
MinValue | The MinValue property is used to:- get and set the bottom value of a report based on a data file.
- get the minimum value of the current filter.
- get the minimum value of a data series in a chart.
- get and set the minimum value for some types of controls.
|
MinWidth | The MinWidth property is used to get and change the minimum width of a control or window. |
Modified | The Modified property is used to determine if a control or group of controls has been modified by the user (keyboard or mouse input). |
MouseCursor | The MouseCursor property gets and sets the cursor displayed when pointing over a control, window or page. |
Multiline | In a window or page, the Multiline property is used to:- find out and modify the "Multiline" option of an Edit control.
- find out and modify the "Multiline" option of a column in a Table control.
In a report, the Multiline property is used to determine and change the "Multiline" option of a control. |
Multiselection | The Multiselection property gets and sets the selection mode:- in a Table and TreeView Table control.
- in a Pivot Table control.
- in a List Box and ListView control.
- in a Looper control.
- in a Calendar control.
- of files in an Upload control.
|
Name | The Name property is used to get:- the name of the font associated with a Font variable.
- the name of a control, report or report block.
- the name of a control, group of controls or window.
- the name of a control, group of controls or page.
|
Note | The Note property is used to:- Find out the notes associated with a control, a window, a page or a report.
- Modify the notes associated with a control, a window a page or a report.
|
NoteTitle | The NoteTitle property is used to:- Get the title of the notes used in the technical documentation of a control, window, page or report.
- Change the title of the notes used in the technical documentation of a control, window, page or report.
|
NullIfEmpty | The NullIfEmpty property is used to: - Find out whether the value returned by the control is NULL if its content is empty.
- Configure the value returned by the control if its content is empty.
|
Num1stDayOfTheWeek | The Num1stDayOfTheWeek property gets and sets the 1st day of the week displayed in:- a Calendar control.
- an Organizer control.
- a Scheduler control.
- an Edit control in Date format with Calendar.
|
Opacity | The Opacity property is used to get and define the opacity percentage for a window, or for controls in a window or page. |
Pane | The Pane property is used to: - Find out the pane tabs associated with a control.
- Define the pane tabs associated with a control.
|
ParallaxRateHeight | The ParallaxRateHeight property is used to determine and specify how fast a control is reduced when the scrollbar in the window, internal window or page moves. |
ParallaxRateY | The ParallaxRateY property is used to determine and specify how fast a control moves when the scrollbar in the window, internal window or page moves. |
Password | The Password property can be used: - on the edit controls (or on the text table columns) to find out whether the control is a "Password" control or to modify the "Password" type of the control.
- on the connections (HFSQL Client/Server, OLE DB, etc.) to define the password of the user who uses the connection.
|
Pinned | The Pinned property is used to: - Pin a control: the position of the pinned control will be relative to the visible area of its container and not to the content area.
- Determine if a control is pinned.
|
Plane | The Plane property is used to:- Get:
- the active plane of a window (or report) or the plane to which a control belongs.
- the active plane of a WEBDEV element.
- Change:
- the active plane of a window (or report) or associate a control with another plane.
- the active plane of a WEBDEV element.
|
Process | The Process property is used to modify the processes to be executed by the events available on a control, window, page, report, etc. |
RichEdit | The RichEdit property is used to manage the RTF (Rich Text Format) type: - of an edit control or Static control found in a window.
- of a Static control found in a report.
|
RightButton | The RightButton property gets and sets the characteristics of a button located on the right side of an Edit control. |
RightClick | The RightClick property gets and sets the name of the Button control that will be executed when an object is right-clicked. |
RightIndent | The RightIndent property is used to get and change the space to the right of the text in a control. |
RightToLeft | The RightToLeft property is used to get the writing direction on a control, column, window or report. |
SecurityHtml | The SecurityHtml property gets and sets the status of the security mechanism of HTML Display and HTML Editor controls. |
SelectedText | The SelectedText property is used to get and change the text selected in an Edit control, editable Combo Box control or editable column in a Table control. |
SelectedTextWithTag | The SelectedTextWithTag property is used to get or change the text selected in a rich edit control (RTF or HTML) with HTML or RTF formatting tags. |
SelectionIfReadOnly | The SelectionIfReadOnly property is used to determine and specify if the content of an Edit control can be selected when in read-only mode. |
ShortcutKey | The ShortcutKey property gets and sets the keyboard shortcut associated with a control or menu option. |
Size | The Size property is used to determine and change the size of an element. |
State | The State property gets and sets the state of an element. |
StoredValue | The StoredValue property is used to get the value currently stored by: - a row in a List Box, ListView or Combo Box control.
- a "Text token" Edit control.
- a row of a Table control.
- an input suggestion in an Edit control (if the suggestion is selected).
|
StoreTheValue | The StoreTheValue property is used to:- Find out whether a control keeps its value between two application starts via the persistence.
- Modify a control so that it keeps (or not) its value between two application starts via the persistence.
|
Style | The Style property is used to retrieve and assign the entire style of a control (including the overrides). |
TABOrder | The TABOrder property gets and sets the position of a control in the tab order of a window. |
TextDirection | The TextDirection property is used to determine and change the writing direction in a window, report or control (useful for languages such as Arabic or Hebrew). |
TextWithoutFormat | The TextWithoutFormat property is used to get the text contained in a rich edit control without the formatting tags. |
Token | The Token property is used to manage the different tokens associated with a "Text token" Edit control. |
TokenAllowDuplicate | The TokenAllowDuplicate property is used to: - Allow or prevent the user from entering duplicates in a "Text token" Edit control.
- Determine if duplicates are allowed in a "Text token" Edit control.
|
TokenCurrentInput | The TokenCurrentInput property is used to read or change the value being entered in a "Text token" edit control. |
TokenDeletable | The TokenDeletable property is used to: - Determine if the end user is allowed to delete tokens in a "Text token" Edit control.
- Allow or prevent the end user from deleting tokens in a "Text token" Edit control.
|
TokenEnabled | The TokenEnabled property determines if an Edit control is a "Text token" Edit control. |
TokenListSeparator | The TokenListSeparator property retrieves or modifies the separators that trigger the creation of new tokens when entering information in a "Text token" Edit control. |
ToolTip | The ToolTip property is used to get and change the text displayed in the tooltip associated with a window or page control. |
TopIndent | The TopIndent property is used to get and change the space at the top of the text (top margin) in a control. |
Type | The Type property is used to get:- the type of element (data file or item) defined programmatically or in the data model editor, view or query.
- the type of object.
- the type of data held in a Variant.
|
Unicode | The Unicode property is used to:- Determine if the value of a control is a Unicode string.
- Specify whether the value of a control is a Unicode string.
|
Value | The Value property is used to:- Find out and modify the value of a report control.
- Find out and modify the value of a control or the title of a window.
- Find out the identifier of a stream.
- Find out and modify the value of a control or the title of a page.
|
Visible | The Visible property is used to:- Find out whether an element is visible.
- Make an element visible or invisible.
|
VisibleWithAnimation | The VisibleWithAnimation property is used to make a control visible or invisible via the "Appear/Disappear" animation. |
VisualEffect | The VisualEffect property allows you to apply a visual effect on a control or group of controls in a window. |
Width | The Width property gets and changes the width:- of a control or block in a report.
- of a control (found in a window), window, column found in a table or column found in a list box (including listview).
- of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
|
WinEditAllowed | The WinEditAllowed property is used to determine and configure the actions allowed on a control when the window switches to "Allow end users to modify the UI" mode. |
X | The X property is used to:- Get the X-coordinate of a control, Table control column or window (position on the X-axis).
- Get the X-coordinate of a control or window (position on the X-axis).
|
XInitial | The XInitial property is used to:- Get the X-coordinate:
- of a control (position on the X-axis) when opening the window or the page.
- of a window (position on X-axis) when opening the window.
- Change the X-coordinate of a control anchored "to the right" (position on the X-axis) when opening the window.
- Get the X-coordinate of a control in relation to its block (position in millimeters on the X-axis) when opening the report.
|
Y | The Y property is used to:- Find out the Y-coordinate of a control or window (position on Y-axis).
- Modify the Y-coordinate of a control or window.
|
YInitial | The YInitial property is used to:- Find out the Y-coordinate:
- of a control (position on Y-axis) when opening the window or the page.
- of a window (position on Y-axis) when opening the window.
- Modify the Y-coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
- Find out the Y-coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
|
ZOrder | The ZOrder property defines the Z-order of an element. |