<Page>.Display (Function)

ONLINE HELP
WINDEV, WEBDEV AND WINDEV MOBILE

Version:

Home | Sign in | English

Retrieving parameters in the event "Global declarations"
Retrieving the parameters with PageParameter
Principle for opening a page
Operations run when the page is displayed
Special cases
Opening a page of a component
Pre-launched sessions

WINDEV

WEBDEV

WINDEV Mobile

Others

See also

<Page>.Display (Function)

In french: <Page>.Affiche

Displays a site page in the browser of Web user.

The page displayed can be a static WEBDEV page, a page in session mode or an AWP page.

The page displayed can be a static WEBDEV page or an AWP page. To display an AWP page while passing parameters, use FileDisplay.

The page displayed is another PHP page of the project.

Remarks:

If the function <Page>.Display is used in the Short Code of an Button control, the page will be opened in the destination defined for this Button control ("General" tab of the HEX@ field or function ChangeTarget).
To display any page in a browser, use one of the following functions: BrowserRunApp or BrowserOpen.

Versions 24 and later

This function is now available in Ajax mode.

New in version 24

This function is now available in Ajax mode.

Example

// Display a page according to the authorization
IF bAuthorize(Name) THEN
PAGE_Welcome.Display(Name)
ELSE
PAGE_Error.Display("Access denied")
END

// In "PAGE_MyPage.AWP", displays the 150th element
// of "Instruments" category
PAGE_MyPage.Display("Instruments", 150)

// Displays a static page in the current frame
PAGE_PAGESTATIC.Display()

Syntax

<Page>.Display([<Parameter 1> [... [, <Parameter N>]]])

<Page>: Page name

Name of page to display.
In test mode, specify the full path of the page if the page to open is located in a directory other than the project directory.

<Parameter 1>: Type of value sent to the page (optional)

Parameters expected by the opening process of the page to display. These parameters are passed by reference and are considered as global variables to the page. For an AWP or PHP page, these parameters are converted into string.

<Parameter N>: Type of value sent to the page (optional)

Parameters expected by the opening process of the page to display. These parameters are passed by reference and are considered as global variables to the page. For an AWP or PHP page, these parameters are converted into string.
Versions 15 and later
In the environment, when defining the action of a button or link, you have the ability to select the page to display to avoid programming <Page>.Display in the click code. You also have the ability to define the parameters passed to the page by clicking the "Parameters" button.
The parameters can also be defined as:
Fixed value,
Reference to a page control,
Reference to a variable.
New in version 15
In the environment, when defining the action of a button or link, you have the ability to select the page to display to avoid programming <Page>.Display in the click code. You also have the ability to define the parameters passed to the page by clicking the "Parameters" button.
The parameters can also be defined as:
Fixed value,
Reference to a page control,
Reference to a variable.
In the environment, when defining the action of a button or link, you have the ability to select the page to display to avoid programming <Page>.Display in the click code. You also have the ability to define the parameters passed to the page by clicking the "Parameters" button.
The parameters can also be defined as:
Fixed value,
Reference to a page control,
Reference to a variable.

<Page>.Display([<Destination> [, <Window of the browser> [, <Options> [, <Width> [, <Height> [, <Horizontal position> [, <Vertical position> [, <Javascript parameters>]]]]]]]])

<Page>: Page name

Name of page to display.

<Destination>: Optional character string or constant

Name of target frame or alias of target iFrame control.
<Target> can also take the following values:
ParentFrame the target is the container of the current page (parent frameset, parent browser).
This parameter can also correspond to the "_parent" string (compatibility with WEBDEV 1.5).
CurrentFrame the target is the current frame (default value).
This parameter can also correspond to the "_self" string (compatibility with WEBDEV 1.5).
CurrentBrowser the target is the current browser.
This parameter can also correspond to the "_top" string (compatibility with WEBDEV 1.5).
NewBrowser the target is a new browser (a new browser window is opened). The following parameters of <Page>.Display are used to configure this new window.
This parameter can also correspond to the "_blank" string (compatibility with WEBDEV 1.5).

<Window of the browser>: Optional character string (with quotes)

Name of window in the new browser if <Target> is equal to the NewBrowser constant. This parameter allows you to redisplay a page in a browser with the same name (if several browsers are opened on the computer of Web user).

<Options>: Optional Integer constant (or combination of constants)

Parameters of the window in the new browser if <Target> is equal to the NewBrowser constant:
ONLocation The address bar will be displayed
ONScrollbar The scrollbars will be displayed
ONFull
(Default value) The window of new browser will include all options (equivalent to the combination of all constants)
ONResizable The window of new browser will be resizable
ONLink The link bar will be displayed
ONMenuBar The menu bar will be displayed
ONSatusBar The status bar will be displayed
ONToolbar The toolbar will be displayed
ONSimple The window of the new browser will be a simple window (no combination of constants).

<Width>: Optional integer

Width of window in the new browser (in pixels).

<Height>: Optional integer

Height of window in the new browser (in pixels).

<Horizontal position>: Optional integer

Horizontal position (in pixels) of window in the new browser (in relation to the top left corner of the screen).

<Vertical position>: Optional integer

Vertical position (in pixels) of window in the new browser (in relation to the top left corner of the screen).

<Javascript parameters>: Optional character string (with quotes)

Other Javascript parameters that must be used when opening a new browser if <Target> is equal to the NewBrowser constant.

Remarks

Retrieving parameters in the event "Global declarations"

To retrieve parameters in the "Global declarations" event of the page, specify the following line at the beginning of the code:

PROCEDURE <Page name> (<Parameter 1> [, ...[, <Parameter N>]]])

These parameters can be strings, reals or integers. The parameters retrieved in the "Global declarations" event of the page are character strings (AWP and PHP pages only)

Retrieving the parameters with PageParameter

PageParameter is used to retrieve the value of the parameters passed to the page. Several possibilities exist according to the type of page:

Retrieval according to the name of the parameter
The name of the parameter was specified in the URL of the page.
For an AWP or PHP page, the parameters are automatically renamed by WEBDEV (P1, P2, ..., P256). In this case, no controls named P1, P2, ..., P256 must be found in the page.
1. Code used to display the page by passing parameters:
  
  // In the "MyPage.AWP" page, displays the 350th element
  // of "Instruments" category
  PAGE_MyPage.Display("Instruments", 350)
2. Code used to retrieve the parameters:
  
  // Retrieve the parameters
  SoughtCategory is string = PageParameter("P1")
  SoughtID is int = PageParameter("P2")
Retrieval according to the subscript of the parameter
The subscript of the parameter corresponds to the order in which the parameters were passed in the URL of the page.
1. Code used to display the page by passing parameters:
  
  // In the "PAGE_MyPage.AWP" page, displays the 350th element
  // of "Instruments" category
  PAGE_MyPage.Display("Instruments", 350)
2. Code used to retrieve the parameters:
  
  // Retrieve the parameters
  SoughtCategory is string = PageParameter(1)
  // SoughtCategory = "P1=Instruments"
  SoughtCategory = Right(Length(SoughtCategory)-3)
  SoughtID is int = PageParameter(2)
  // SoughtID = "P2=350"
  SoughtID = Right(Length(SoughtID)-3)

Principle for opening a page

The following operations are performed by <Page>.Display:

Creating a page context on the server (except when displaying PHP pages).
Return the page to the browser of web user.

<Page>.Display only returns the page in the browser of the Web user.

Operations run when the page is displayed

The following operations are run when the page is displayed:

Running the "Global declarations" event of control templates and internal pages.
Running the "Global declarations" event of the page.
Intialization on the direct child controls of the page (and recursively on the page controls and objects):
- Declaration code of variables (if it exists and if it was not run yet: page, supercontrol, popup, ...).
- Intialization of direct children.
- Versions 24 and later
  Request for refreshing the display code (if it exists).
  New in version 24
  Request for refreshing the display code (if it exists).
  Request for refreshing the display code (if it exists).
- Initialization code (if it exists).
For all page controls (according to a browse in depth):
- Filling the control (for the List box, Combo box, Table or browsing Looper controls)
- End of initialization code (if it exists).
Versions 24 and later
Running the event "Request for refreshing the display" of the page (if it exists).
New in version 24
Running the event "Request for refreshing the display" of the page (if it exists).
Running the event "Request for refreshing the display" of the page (if it exists).
Running the "Initializing" event of the page.

Furthermore, for a page that inherits from a template, the code of template(s) is run just before the page code. For the controls that inherit from a template, ExecuteAncestor must be used to call the template code (except for the declaration code).

Special cases

To re-display a page, we recommend that you use <Page>.Refresh.
To take a change of language into account (Nation), use <Page>.Use.
If a page context with the same name already exists, it is deleted (and its closing code is run) before the new one is opened.
To display any page (not necessarily found in the site), use BrowserOpen for example.

Opening a page of a component

To open a page of a component, use the name of the component page (the component being included in the project). For example:

ComponentPage.Display()

If a conflict occurs with a project element, the name of the element must be prefixed by the name of the component. For example:

MyComponent.MyPage.Display()

To use the name of the page in a variable, the name of the component must be specified. For example:

sPage is string = "MyComponent.MyPage"
sPage.Display()

Versions 20 and later

Pre-launched sessions

If your project uses pre-launched sessions, this function must not be used in the "Initializing" event of the project. This function must be used in the event "Initializing the project after connection to the site".

New in version 20

Pre-launched sessions

Component : wd260page.dll