ONLINE HELPFOR WINDEV, WEBDEV AND WINDEV MOBILE
Color of the LED. Corresponds to: an RGB color (returned by RGB),an HSL color (returned by HSL),a preset color of WLanguage.Caution: Some devices do not allow you to modify the LED color or they do not propose all the colors. A default color (or a similar color) will be used if the specified color is not supported by the device.
Duration (in milliseconds) during which the diode must be switched on. If this parameter is set to 0, the diode will be switched on until the call to LEDSwitchOff or until the application is closed. If this parameter is not specified, the diode will be switched on during 3 seconds.This parameter can correspond to: an integer corresponding to the number of milliseconds,a Duration variable,Versions 23 and laterthe direct indication of duration (1 s or 10 ms for example). New in version 23the direct indication of duration (1 s or 10 ms for example). the direct indication of duration (1 s or 10 ms for example).
True if the LED must blink, False (default value) if the LED must be fixed. The blinking frequency can change from a device to another one.
Operating mode of the LEDs
Last update: 03/17/2018
Send a report |
Search in progress...
J'accepte les termes de la licence
All you have to do is configure your product as follows: