- Implementing the GPS management
- Checking whether the GPS is enabled
- Be notified when the GPS status changes
- Position tracking
- Ending the use of GPS functions
- When to use each function?
- Functions available according to the platforms
- Summary table
Managing geolocation and GPS
WINDEV Mobile and WEBDEV allow you to exploit geolocation and GPS features found on mobile devices and browsers.
In the Web sites
, you have the ability to interact with the GPS features of the device, if available (mobile device in most cases). You can retrieve or track a location in a website displayed on a mobile device.
: Geolocation is only available on certain modern browsers:
- FireFox from version 3.5,
- Chrome from version 5.0.342.1,
- Opera from version 10.6,
- Safari from version 5.0.
During the call to a geolocation function, the browser requests a location authorization.
Implementing the GPS management
Checking whether the GPS is enabled
To check whether the GPS is enabled, all you have to do is use GPSStatus
// Is the GPS enabled?
IF GPSStatus() = gpsEnabled THEN
Error("The GPS cannot operate.", ...
"It must be enabled to access this application.")
Be notified when the GPS status changes
To be notified when the GPS status changes, simply call GPSStatus
and specify the name of the procedure that will handle the current GPS status.
The procedure code is as follows:
IF CurrentStatus = Status THEN RETURN
CurrentStatus = Status
// The provider was enabled by the user.
STC_Status = "GPS enabled"
// The provider was disabled by the user.
STC_Status = "GPS disabled"
// The provider is off service.
STC_Status = "GPS off service"
// The provider is temporarily unavailable.
STC_Status = "GPS unavailable"
// The provider is available.
STC_Status = "GPS available"
// Requests location tracking with a maximum time between two calls to
// GPSFollowMovement(_GetLocation, 1000)
In this procedure, if GPS is enabled, a specific procedure is used to track the device.
This feature is not available.
To track the device's location, simply use GPSFollowMovement
and specify the name of the procedure that will handle location changes.
The code of the procedure can be as follows:
// Update the information about the location
// Latitude and longitude
STC_Latitude = StringBuild("Latitude: %1", MyLocation.Latitude)
STC_Longitude = StringBuild("Longitude: %1", MyLocation.Longitude)
IF MyLocation.SpeedValid = True THEN
STC_Speed = StringBuild("Speed: %1 m/s", MyLocation.Speed)
IMG_SPEED_VALIDITY = IMG_OK
STC_Speed = "Speed: N/A"
IMG_SPEED_VALIDITY = IMG_NOTOK
IF MyLocation.AltitudeValid = True THEN
STC_Altitude = StringBuild("Altitude: %1 m", MyLocation.Altitude)
IMG_ALTITUDE_VALIDITY = IMG_OK
STC_Altitude = "Altitude: N/A"
IMG_ALTITUDE_VALIDITY = IMG_NOTOK
IF MyLocation.DirectionValid = True THEN
STC_Direction = StringBuild("Direction: %1 ° E", MyLocation.Direction)
IMG_DIRECTION_VALIDITY = IMG_OK
STC_Direction = "Direction: N/A"
IMG_DIRECTION_VALIDITY = IMG_NOTOK
STC_Last_update = StringBuild("Last update on %1 at %2.", ...
STC_Last_update.Visible = True
In this code, MyLocation
is a geoPosition
variable. The properties of this type of variable are used to find out the location characteristics.
The WLanguage procedure used requires specific parameters.
Ending the use of GPS functions
Depending on the selected settings and on the call frequency, geolocation functions can consume a lot of resources on the device (battery, bandwidth, etc.). GPSEnd
must be called when the location functions are no longer used by the application.
This feature is not available.
When to use each function?
|Function||When to use it? ||Accuracy||Energy consumption|
|geoTrackingXXX||Permanent tracking of location changes, even when the application is in the background.||High accuracy, but the frequency of notifications is low and varies depending on the system. ||Low|
|GPSFollowMovement||Permanent tracking of location changes when the application is in the foreground.||Accuracy according to GPSInitParameter. ||Consumption according to GPSInitParameter.|
|GPSDetectPosition||Notification of the proximity of a given location when the application is in the foreground. ||Accuracy according to GPSInitParameter. ||Consumption according to GPSInitParameter.|
|GPSGetPosition||Get current location at a specific moment when the application is in the foreground. It may take long, depending on the surroundings (inside a building, cloudy day, etc.).||Accuracy according to GPSInitParameter. ||Depends on the number of calls. |
|GPSLastPosition||Immediately get the last known location of the device.||Low consumption, since it depends on when the last location was actually retrieved. Also depends on GPSInitParameter. ||Low consumption. |
Functions available according to the platforms
The table below presents the different geolocation/GPS functions and the different platforms for which they are currently available (this table can evolve with each version):
Cross-platform examples (WINDEV Mobile): WM Geolocation
This page is also available for…