PC SOFT

ONLINE HELP
FOR WINDEV, WEBDEV AND WINDEV MOBILE

Home | Sign in | English US
  • Overview
  • Parameters specific to the SNMP check
  • Information about the SNMP agent
  • Information about the OID to check
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
Overview
The monitoring robot will read the value of the specified OID and compare its value with the reference value.
The check will be:
  • successful if the value of the OID was read and if it corresponds to the reference value.
  • unsuccessful otherwise.
Parameters specific to the SNMP check

Information about the SNMP agent

To perform an SNMP check, specify:
  • the address of the SNMP agent to use,
  • the community of the agent.

Information about the OID to check

To perform an SNMP check, specify:
  • the preset OID if it exists,
  • the test conditions of the value.
Note: To add a preset OID:
  1. Enter its name ("Preset OIDs" control).
  2. Enter its value ("OID to read" control).
  3. Click the "+" button.
Minimum required version
  • Version 14
This page is also available for…
Comments
Click [Add] to post a comment