PC SOFT

ONLINE HELP
FOR WINDEV, WEBDEV AND WINDEV MOBILE

Home | Sign in | English US
  • Overview
  • Parameters specific to the check regarding the activity of an application
  • Information about the application
  • Information about the activity file (.INI file)
  • Information for connecting to the FTP server
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
Check: Activity of an application
Overview
The monitoring robot proposes to check the activity of a WINDEV application.
In this case, the robot will check the activity of the application by reading the date and the time found in a .INI file. This INI file is an activity file, regularly filled by the WINDEV application that is checked.
The check will be:
  • successful if the date and the time read do not exceed the alert time-out.
  • unsuccessful otherwise.
Note: The file to check can be a file found on an FTP server.
Parameters specific to the check regarding the activity of an application

Information about the application

These parameters concern the WINDEV application to check. You must specify:
  • the name of the computer where the application is installed (computer accessible by the robot).
  • the name of the WINDEV application.
  • the time-out before alert. This time-out corresponds to the maximum time-out allowed between the date and time specified in the INI file and the date and time of the test.

Information about the activity file (.INI file)

These parameters affect the INI file used to check the activity of the application. You must specify:
  • the name of the directory where the INI file is installed (computer accessible by the robot).
  • the name of the INI file.
  • the section that must be read in the INI file.
  • the name of the keyword containing the date and time in YYYYMMDDHHMMSS format.

Information for connecting to the FTP server

The INI file of the application can be accessible on an FTP server. In this case, you must specify the characteristics of the FTP server to use:
  • the address of the FTP server.
  • the port number of the server and the connection mode (passive or not).
  • the user and the associated password.
Minimum required version
  • Version 14
This page is also available for…
Comments
Click [Add] to post a comment