ONLINE HELP
 WINDEVWEBDEV AND WINDEV MOBILE

Help / Environment / Installing WINDEV, WEBDEV, WINDEV Mobile
  • Overview
  • Required configuration
  • Configuration required for installing WINDEV
  • Configuration required to install WEBDEV
  • Configuration required for installing WINDEV Mobile
  • Setup
  • Configuring the Web servers
  • Register
  • Dongle
  • Compatibility with the earlier versions
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac CatalystUniversal Windows 10 App
Others
Stored procedures
Overview
This chapter presents the configuration required to install WINDEV, WEBDEV or WINDEV Mobile as well as the different steps of setup.
Caution: To install WINDEV, WEBDEV or WINDEV Mobile, you must be connected as computer administrator.
Required configuration
WINDEV

Configuration required for installing WINDEV

We will distinguish between the configuration of the development computer (your computer) and the configuration required for the applications developed by WINDEV to operate (the end-user computers).
Development computer:
  • Screen: minimum size: 1920 x 1080
  • 4 GB of RAM (8 GB or more recommended).
  • 4 GB of disk space (10 GB for a full setup: the software includes hundreds of examples).
  • running Windows 10 or later.
  • Caution: To install WINDEV, you must be connected as computer administrator.
User computer:
  • 2 GB of RAM.
  • running Windows Vista or 7 (32 or 64-bit) or later. An SSE2 processor is required.
    New in version 2024
    Caution: To use the Map control, the user computer must run Windows 10 or later.
You will notice that the WINDEV source code is identical regardless of the Windows version on which the programs will be run.
Remark: When the development computer has a screen with a high resolution, the font size in the WINDEV editors may be too small to be readable. This is the case on a Macbook retina in 2 560 x 1 600 or on the Windows computers in 3 000 x 1 800. To increase the size of all the fonts:
  1. Open the general options of WINDEV ("Home" tab, "Environment" group, "Options").
  2. Go to the "General" tab.
  3. In "DPI management", select "Let Windows manage DPI".
  4. The DPI settings will be applied next time WINDEV Mobile is started.
For more details, see WINDEV options.
WEBDEV - Server code

Configuration required to install WEBDEV

We will distinguish between the configuration of the development computer (your computer), the configuration required to host your sites (the computer of your hosting provider) and the configuration required for using the sites developed in WEBDEV (the computers of the Web users).
Development computer:
  • Screen: minimum size: 1920 x 1080
  • 4 GB or RAM (8 GB or more recommended).
  • 4 GB of disk space (10 GB for a full setup: the software includes hundreds of examples).
  • running Windows 10 or later.
    Remark: If WEBDEV is used in a virtual machine, hardware acceleration must not be enabled..
  • Caution: To install WEBDEV, you must be connected as computer administrator.
Host computer:
  • Server 1 GB of RAM.
  • System:
    • Minimum version: Windows 2016 and later
    • Recommended version: Windows Server 2016 edition (standard or datacenter) and later.
  • SSE4.1 and later processors.
  • Web server (see "Configuring the Web servers").
You will notice that the WEBDEV source code is identical regardless of the Windows version on which the programs will be run.
Computer of the Web user: standard Internet browser.
Remark: Microsoft Edge or Chrome is recommended.
Remarks: When the resolution of the screen on a development computer is important, the size of the character fonts in the WEBDEV editors may not be large enough for an efficient reading. This is the case on a Macbook retina in 2 560 x 1 600 or on the Windows computers in 3 000 x 1 800. To increase the size of all the fonts:
  1. Open the general options of WEBDEV ("Home" tab, "Environment" group, "Options").
  2. Go to the "General" tab.
  3. In "DPI management", select "Let Windows manage DPI".
  4. The DPI settings will be applied next time WINDEV Mobile is started.For more details, see WEBDEV options.
WINDEV Mobile

Configuration required for installing WINDEV Mobile

We will distinguish between the configuration of the development computer (your computer) and the configuration required for the applications developed by WINDEV Mobile to operate (the end-user computers).
Development computer:
  • Screen: minimum size: 1920 x 1080
  • 4 GB or RAM (8 GB or more recommended).
  • 4 GB of disk space (10 GB for a full setup: the software includes hundreds of examples).
  • running Windows 10 or later.
  • Caution: To install WINDEV Mobile, you must be connected as computer administrator.
Remarks: When the resolution of the screen on a development computer is important, the size of the character fonts in the WINDEV Mobile editors may not be large enough for an efficient reading. This is the case on a Macbook retina in 2 560 x 1 600 or on the Windows computers in 3 000 x 1 800. To increase the size of all the fonts:
  1. Open the general options of WINDEV Mobile ("Home" tab, "Environment" group, "Options").
  2. Go to the "General" tab.
  3. In "DPI management", select "Let Windows manage DPI".
  4. The DPI settings will be applied next time WINDEV Mobile is started.
For more details, see Options of WINDEV Mobile.
Mobile computer:
  • equipped with an ARM or ARM-compatible processor (XScale, Samsung, ... except for the ARM V4T-compatible processors), X86 or X-86 compatible (Intel Transmeta, Geode, ...) and 64 MB of RAM.
  • in Android.
  • in iOS.
Please note that the WINDEV Mobile source code remains the same, regardless of the Android or iOS version the programs will run on.
Remark: Windows Mobile, Windows CE and Windows Embedded are no longer supported by Microsoft, but are still used in the industrial field.
To continue developing for Windows Mobile, you must use version 26. Version 2024 gives you access to version 26, which can be downloaded here.
Setup
The setup is very easy, simply follow the instructions included with the installation package.
You can install WEBDEV and WINDEV Mobile separately, or integrate them into WINDEV if it is already installed. Up to version 25, this integration is only allowed in 64-bit mode. From version 26, you can integrate WEBDEV and WINDEV Mobile into WINDEV in 64-bit and 32-bit mode.
To make things easier, the setup procedure automatically creates the "WINDEV", "WEBDEV" or "WINDEV Mobile" program group in "Start .. Programs" and installs the necessary files.
The WINDEV, WEBDEV and WINDEV Mobile setup wizard proposes to help improve the product by allowing the collection of information on how the product is used. This optional and anonymous data collection allows PC SOFT to improve its products.
WEBDEV - Server code

Configuring the Web servers

When installing WEBDEV, the following servers are automatically configured for WEBDEV:
Web server
Details
IIS 8 and laterMicrosoft Internet Information Server version 8 (and later).
Microsoft server provided with Windows 10.
ApacheVersion 2.2, 2.4
Free Web server supplied by the Apache Group.
Remark: Your Web server must be configured manually if it is not displayed in this list.
Register
IMPORTANT: fill and return your registration card today.
The registration card supplied with your product is very important. It enables you to benefit from the free services offered by PC Soft to the customers: Free Technical Support (for a specified number of requests), information about new features or products, product upgrades, ...
You also have the ability to register via Internet directly:
  1. Start the desired IDE.
  2. On the "Home" tab, in the "Online help" group, expand "Help" and select "Register product".
Dongle
The dongle supplied with your product is specific to the development environment.
This dongle is not required for the end users or for the hosting provider of your Internet sites.
The principle is simple, the dongle must be plugged in when the product is used.
Two types of keys are available, the key that goes on the parallel port of your computer (most common one) or the USB key.
To make sure that the parallel key operates properly, you must:
  • insert the key into the parallel port of your computer when it is switched off
  • connect your printer to the dongle
  • switch the computer and the printer on
  • start a print job
If the document is printed, your dongle is properly connected.
For the USB key, plug it into an available USB port and start WINDEV, WEBDEV or WINDEV Mobile.
Remark: If the dongle is switched off or if it blinks, see the following FAQ: Installing the driver required to recognize the dongle of WINDEV, WEBDEV or WINDEV MOBILE.
Compatibility with the earlier versions
As for all the PC SOFT products, we guarantee backward compatibility with the earlier version.
To migrate the projects created with an earlier version, see the online help.
Minimum version required
  • Version 9
This page is also available for…
Comments
Click [Add] to post a comment

Last update: 01/16/2024

Send a report | Local help