PC SOFT

ONLINE HELP
FOR WINDEV, WEBDEV AND WINDEV MOBILE

Home | Sign in | English US
  • Overview
  • Sending the setup program to an FTP server
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
Overview
Once the setup program was generated (CAB format only), this program must be copied onto an FTP server.
Sending the setup program to an FTP server
To send the setup program to an FTP server:
  1. Select the files to install. The two following files are required: "<ApplicationName>.CAB" corresponding to the application update and "VERSION.WX" containing the version number of the update.
  2. Enter the FTP parameters:
    • the address of the server where the setup program must be installed.
    • the port to use. The port 21 will be used by default.
    • the name of the user on the server where the setup program must be installed.
    • the password of the user on the server where the setup program must be installed.
    • the directory where the setup program must be installed.
  3. If the current computer is using a Firewall, check "Establish a passive connection".
  4. To test the specified FTP parameters, click the "Test" button.
  5. To save the specified FTP parameters, click the "Save" button. These parameters will be saved in an INI file and they can be reused later via the "Load" button.
  6. Click the "Submit" button to actually send the setup program to the FTP server.
Minimum required version
  • Version 10
Comments
Click [Add] to post a comment