PC SOFT

ONLINE HELP
FOR WINDEV, WEBDEV AND WINDEV MOBILE

WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
Properties associated with the Preset control
The following properties can be used with the "Preset" controls in the report editor:
Versions 09 and later
Anchor
New in version 09
Anchor
Anchor
..Anchor is used to manage the anchor of a control in a window or report.
Versions 09 and later
AnchorRateBottom
New in version 09
AnchorRateBottom
AnchorRateBottom
..AnchorRateBottom is used to:
  • Find out the anchor rate when a control moves on the vertical axis.
  • Modify the anchor rate when a control moves on the vertical axis.
Versions 09 and later
AnchorRateHeight
New in version 09
AnchorRateHeight
AnchorRateHeight
..AnchorRateHeight is used to:
  • Find out the anchor rate in height of a control.
  • Modify the anchor rate in height of a control.
Versions 09 and later
AnchorRateRight
New in version 09
AnchorRateRight
AnchorRateRight
..AnchorRateRight is used to:
  • Find out the anchor rate when a control moves on the horizontal axis.
  • Modify the anchor rate when a control moves on the horizontal axis.
Versions 09 and later
AnchorRateWidth
New in version 09
AnchorRateWidth
AnchorRateWidth
..AnchorRateWidth is used to:
  • Find out the anchor rate when a control (or a table column) stretches on the horizontal axis.
  • Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
Versions 14 and later
Border
New in version 14
Border
Border
..Border is used to find out and modify the border characteristics
  • for a report control or for a report block.
  • for a window control.
  • for a table cell
Versions 09 and later
BrushColor
New in version 09
BrushColor
BrushColor
..BrushColor is used to manage the background color of a control, window, page or report block.
Versions 09 and later
Color
New in version 09
Color
Color
..Color is used to find out and modify the font color for:
  • a font variable.
  • a text displayed in a Static control or in a calculated control of a report.
  • a text displayed in a window control.
  • a text displayed in a page control.
Versions 09 and later
Empty
New in version 09
Empty
Empty
..Empty is used to find out whether:
  • a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control.
  • a Chart control contains no series.
  • a report control is empty (control linked to an item).
  • an array (or an associative array) contains no element.
  • an element of an associative array exists or not.
  • a queue, a list or a stack contains no element
Versions 09 and later
Font
New in version 09
Font
Font
..Font is used to:
  • Find out the identifier of the font used in a control found in a report, in a page or in a window.
  • Modify the font used in a control found in a report, in a page or in a window
Versions 09 and later
FontBold
New in version 09
FontBold
FontBold
..FontBold is used to:
  • Find out whether a text is bold or not.
  • Modify the weight of a text
Versions 09 and later
FontCharset
New in version 09
FontCharset
FontCharset
..FontCharset is used to:
  • Find out the character set used by the screen fonts of a control.
  • Modify the character set used by the screen fonts of a control
Versions 09 and later
FontCondensed
New in version 09
FontCondensed
FontCondensed
..FontCondensed is used to:
  • Find out whether the characters in a text are condensed or not.
  • Condense (or not) the characters in a text.
Versions 09 and later
FontExtended
New in version 09
FontExtended
FontExtended
..FontExtended is used to:
  • Find out whether the characters in a text are extended or not.
  • Extend (or not) the characters displayed in a text.
Versions 09 and later
FontItalic
New in version 09
FontItalic
FontItalic
..FontItalic is used to:
  • Find out whether the italic attribute is assigned to a text.
  • Modify the italic attribute of a text
Versions 09 and later
FontLarge
New in version 09
FontLarge
FontLarge
..FontLarge is used to:
  • Find out whether the characters in a text are enlarged or not.
  • Enlarge (or not) the characters in a text.
Versions 09 and later
FontName
New in version 09
FontName
FontName
..FontName is used to:
  • Find out the font used in a control.
  • Modify the font used in a control.
Versions 09 and later
FontSize
New in version 09
FontSize
FontSize
..FontSize is used to:
  • Find out the size of the font used in a control.
  • Modify the size of the font used in a control.
Versions 09 and later
FontStrikeOut
New in version 09
FontStrikeOut
FontStrikeOut
..FontStrikeOut is used to:
  • Find out whether a text is struck out or not.
  • Strike out (or not) the text displayed in a control
Versions 09 and later
FontUnderlined
New in version 09
FontUnderlined
FontUnderlined
..FontUnderlined is used to:
  • Find out whether a text is underlined or not.
  • Underline (or not) a text.
Versions 09 and later
FutureHeight
New in version 09
FutureHeight
FutureHeight
..FutureHeight is used to find out the height of an auto-sizable control in a report when this control is enlarged.
Versions 09 and later
Group
New in version 09
Group
Group
..Group is used to:
  • find out whether the control belongs to a group of controls. If the control belongs to one or more groups, ..Group is used to identify these groups of controls.
  • associate a control with a group of controls.
Versions 09 and later
Height
New in version 09
Height
Height
..Height is used to find out and modify the height:
  • of a control or block in a report.
  • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
  • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
Versions 09 and later
HeightInPixel
New in version 09
HeightInPixel
HeightInPixel
..HeightInPixel is used to find out the height of a report control in pixels.
Versions 09 and later
HorizontalAlignment
New in version 09
HorizontalAlignment
HorizontalAlignment
..HorizontalAlignment is used to find out and modify the horizontal alignment of a control.
Versions 09 and later
Image
New in version 09
Image
Image
..Image is used to find out and modify the background image associated with a control or with a block.
Versions 09 and later
InitialHeight
New in version 09
InitialHeight
InitialHeight
..InitialHeight is used to:
  • Find out the creation height of a control or window.
  • Modify the base height used to anchor the controls "in height".
  • Find out the creation height of a block or control in a report.
Versions 09 and later
InitialWidth
New in version 09
InitialWidth
InitialWidth
..InitialWidth is used to:
  • Find out the initial width of a control or window.
  • Modify the base width used to anchor the controls in "width".
  • Find out the initial width of a report control.
Versions 09 and later
InputMask
New in version 09
InputMask
InputMask
..InputMask is used to:
  • find out the input mask.
  • modify the input mask (among the available masks for the type)
Versions 09 and later
Multiline
New in version 09
Multiline
Multiline
In a window or in a page, ..Multiline is used to:
  • find out whether an edit control is multi-line. The property is read-only
  • find out and modify the "multiline" option of a column in a Table control
In a report, ..Multiline is used to:
  • find out whether a report control is multi-line
  • modify the "Multi-line" option of a report control.
Versions 09 and later
Name
New in version 09
Name
Name
..Name is used to find out:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
Versions 09 and later
Plane
New in version 09
Plane
Plane
..Plane is used to:
  • Find out
    • the active plane of a window (or report) or the plane to which a control belongs.
    • the active plane of a WEBDEV element.
  • Modify
    • the active plane of a window (or report) or associate a control with another plane.
    • the active plane of a WEBDEV element.
Versions 19 and later
Process
New in version 19
Process
Process
..Process is used to modify the processes that must be run by the events available on a control, window, page, report, ...
Versions 12 and later
RightToLeft
New in version 12
RightToLeft
RightToLeft
..RightToLeft is used to find out the actual writing direction, effective on a control, a column, a window or a report.
Versions 09 and later
State
New in version 09
State
State
..State is used to find out and modify the display status of an element.
Versions 15 and later
TextDirection
New in version 15
TextDirection
TextDirection
..TextDirection is used to find out and modify the writing direction used in a window, in a report or in a control (useful for managing languages such as Arabic or Hebrew).
Versions 09 and later
Value
New in version 09
Value
Value
..Value is used to:
  • Find out and modify the value of a report control.
  • Find out and modify the value of a control or the title of a window.
  • Find out the identifier of a stream.
  • Find out and modify the value of a control or the title of a page.
Versions 09 and later
VerticalAlignment
New in version 09
VerticalAlignment
VerticalAlignment
..VerticalAlignment is used to find out and modify the vertical alignment of a control.
Versions 09 and later
Visible
New in version 09
Visible
Visible
..Visible is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
Versions 09 and later
Width
New in version 09
Width
Width
..Width is used to find out and modify the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be stackable or not.
Versions 09 and later
WidthInPixel
New in version 09
WidthInPixel
WidthInPixel
..WidthInPixel is used to find out the width of a report control in pixels.
Versions 09 and later
X
New in version 09
X
X
..X is used to:
  • Find out the X coordinate of a control, of a Table control column or of a window (position on X axis).
  • Modify the X coordinate of a control or window (position on X axis).
Versions 09 and later
XInitial
New in version 09
XInitial
XInitial
..XInitial is used to:
  • Find out the X coordinate of a control or window (position on X axis) when opening the window.
  • Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
  • Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report
Versions 09 and later
Y
New in version 09
Y
Y
..Y is used to:
  • Find out the Y coordinate of a control or window (position on Y axis).
  • Modify the Y coordinate of a control or window.
Versions 09 and later
YInitial
New in version 09
YInitial
YInitial
..YInitial is used to:
  • Find out the Y coordinate:
    • of a control (position on Y axis) when opening the window or the page.
    • of a window (position on Y axis) when opening the window.
  • Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
Versions 09 and later
ZOrder
New in version 09
ZOrder
ZOrder
..ZOrder is used to manage the z-order position of a control.
Minimum required version
  • Version 9
This page is also available for…
Comments
Click [Add] to post a comment