PC SOFT

ONLINE HELP
FOR WINDEV, WEBDEV AND WINDEV MOBILE

Home | Sign in | English US
  • Overview
  • Properties available for the Chart controls found in a window
  • Properties available for the Chart controls found in a page
  • Properties associated with the Chart control in a page (server code)
  • Properties associated with the Chart control in a page (browser code)
  • Properties associated with the Chart control in a page (PHP)
  • Properties available for the Chart controls found in a report
  • Properties associated with the Chart control in a report
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
Properties associated with the Chart control
Overview
A Chart control can be used:
  • in a window,
  • in a page,
  • in a report.
The properties associated with the control depend on the usage location.
Versions 23 and later
PHP These properties are now available for the PHP sites.
New in version 23
PHP These properties are now available for the PHP sites.
PHP These properties are now available for the PHP sites.
Properties available for the Chart controls found in a window
Versions 09 and later
DisplayEnabled
New in version 09
DisplayEnabled
DisplayEnabled
..DisplayEnabled is used to:
  • find out whether the display of a control or window is enabled or not. If the display is enabled, the content of the control is refreshed on a regular basis.
  • enable (or not) the display of a control or window.
Versions 09 and later
Alias
New in version 09
Alias
Alias
..Alias is used to:
  • find out or modify the alias of a window (WINDEV)
  • Find out and modify the alias of a dynamic tab pane (WINDEV)
  • find out the internal HTML/Javascript name of a control (WEBDEV).
Versions 09 and later
ZOrder
New in version 09
ZOrder
ZOrder
..ZOrder is used to manage the z-order position of a control.
Versions 09 and later
Anchor
New in version 09
Anchor
Anchor
..Anchor is used to manage the anchor of a control in a window or report.
Versions 14 and later
XAxisMax
New in version 14
XAxisMax
XAxisMax
..XAxisMax is used to find out the upper bound on the X axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 14 and later
XAxisMin
New in version 14
XAxisMin
XAxisMin
..XAxisMin is used to find out the lower bound on the X axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 14 and later
YAxisMax
New in version 14
YAxisMax
YAxisMax
..YAxisMax is used to find out the upper bound on the Y axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 14 and later
YAxisMin
New in version 14
YAxisMin
YAxisMin
..YAxisMin is used to find out the lower bound on the Y axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 18 and later
ZAxisMax
New in version 18
ZAxisMax
ZAxisMax
..ZAxisMax is used to find out the upper bound of altitudes (Z axis) for a Chart control (Surface chart).
Versions 18 and later
ZAxisMin
New in version 18
ZAxisMin
ZAxisMin
..ZAxisMin is used to find out the lower bound of altitudes (Z axis) for a Chart control (Surface chart).
Versions 09 and later
ToolTip
New in version 09
ToolTip
ToolTip
..ToolTip is used to find out and modify the text displayed in the tooltip associated with a control found in a window or in a page.
Versions 09 and later
HorizontalAlignment
New in version 09
HorizontalAlignment
HorizontalAlignment
..HorizontalAlignment is used to find out and modify the horizontal alignment of a control.
Versions 09 and later
VerticalAlignment
New in version 09
VerticalAlignment
VerticalAlignment
..VerticalAlignment is used to find out and modify the vertical alignment of a control.
Versions 14 and later
Border
New in version 14
Border
Border
..Border is used to find out and modify the border characteristics:
  • for a report control or for a report block.
  • for a window control.
  • for a table cell.
Versions 09 and later
RightClick
New in version 09
RightClick
RightClick
..RightClick is used to find out and modify the name of the button that will be run when a right click is performed on an object.
Versions 09 and later
Color
New in version 09
Color
Color
..Color is used to find out and modify the font color for:
  • a font variable.
  • a text displayed in a Static control or in a calculated control of a report.
  • a text displayed in a window control.
  • a text displayed in a page control.
Versions 09 and later
BrushColor
New in version 09
BrushColor
BrushColor
..BrushColor is used to manage the background color of a control, window, page or report block.
Versions 20 and later
CrosshairColor
New in version 20
CrosshairColor
CrosshairColor
..CrosshairColor is used to find out and modify the color of the crosshair for a Chart control.
Versions 09 and later
MouseCursor
New in version 09
MouseCursor
MouseCursor
..MouseCursor is used to find out and modify the rollover cursor defined for a control, a window or a page.
Versions 09 and later
DndTarget
New in version 09
DndTarget
DndTarget
..DndTarget is used to find out and modify the behavior of a control during Drag and Drop.
Versions 09 and later
DndSource
New in version 09
DndSource
DndSource
..DndSource is used to find out and modify the behavior of a control during Drag and Drop.
Versions 12 and later
RightToLeft
New in version 12
RightToLeft
RightToLeft
..RightToLeft is used to find out the actual writing direction, effective on a control, a column, a window or a report.
Versions 19 and later
AnimationDuration
New in version 19
AnimationDuration
AnimationDuration
..AnimationDuration is used to find out and modify the duration of animation:
  • in a Chart control. This duration is set to 30 hundredths of a second by default.
  • in an infinite progress bar control. This duration is set to 200 hundredths of a second by default.
Versions 20 and later
CrosshairThickness
New in version 20
CrosshairThickness
CrosshairThickness
..CrosshairThickness is used to find out and modify the thickness of the crosshair for a Chart control.
Versions 09 and later
State
New in version 09
State
State
..State is used to find out and modify the display status of an element.
Versions 09 and later
InitialState
New in version 09
InitialState
InitialState
..InitialState is used to find out the initial status of a control.
Versions 21 and later
WinEditAllowed
New in version 21
WinEditAllowed
WinEditAllowed
..WinEditAllowed is used to find out and modify the operations allowed on a control when the window switches to "Edit by the end user" mode.
Versions 17 and later
Grayed
New in version 17
Grayed
Grayed
..Grayed is used to:
  • Find out whether a control (or a group of controls) is grayed or not.
  • Gray or ungray a control or a group of controls.
Versions 09 and later
Group
New in version 09
Group
Group
..Group is used to:
  • find out whether the control belongs to a group of controls. If the control belongs to one or more groups, ..Group is used to identify these groups of controls.
  • associate a control with a group of controls.
Versions 09 and later
Height
New in version 09
Height
Height
..Height is used to find out and modify the height:
  • of a control or block in a report.
  • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
  • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
Versions 09 and later
ImageHeight
New in version 09
ImageHeight
ImageHeight
..ImageHeight is used to:
  • Find out the height of the image section displayed in an image control or in the background of a chart control.
  • Modify the height of the image section displayed in an image control or in the background of a chart control.
Versions 09 and later
InitialHeight
New in version 09
InitialHeight
InitialHeight
..InitialHeight is used to:
  • Find out the creation height of a control or window.
  • Modify the base height used to anchor the controls "in height".
  • Find out the creation height of a block or control in a report.
Versions 09 and later
MaxHeight
New in version 09
MaxHeight
MaxHeight
..MaxHeight is used to find out and modify the maximum height of a control or window.
Versions 09 and later
MinHeight
New in version 09
MinHeight
MinHeight
..MinHeight is used to find out and modify the minimum height of a control or window.
Versions 09 and later
Image
New in version 09
Image
Image
..Image is used to find out and modify the background image associated with a control or with a block.
Versions 09 and later
BackgroundImage
New in version 09
BackgroundImage
BackgroundImage
..BackgroundImage is used to find out and modify the background image of an element: window, page, control or report.
Versions 09 and later
ImageMode
New in version 09
ImageMode
ImageMode
..ImageMode is used to find out and modify the display mode of an image in an Image control, in an Image table column and in the background of a Chart control found in a window.
Versions 09 and later
Width
New in version 09
Width
Width
..Width is used to find out and modify the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be stackable or not.
Versions 09 and later
ImageWidth
New in version 09
ImageWidth
ImageWidth
..ImageWidth is used to find out and modify:
  • the width of the image section that is displayed in an Image control or in the background of a Chart control.
  • the width reserved in a row of a treeview table for the image of a treeview column.
Versions 09 and later
InitialWidth
New in version 09
InitialWidth
InitialWidth
..InitialWidth is used to:
  • Find out the initial width of a control or window.
  • Modify the base width used to anchor the controls in "width".
  • Find out the initial width of a report control.
Versions 09 and later
MaxWidth
New in version 09
MaxWidth
MaxWidth
..MaxWidth is used to find out and modify the maximum width of a control or window.
Versions 09 and later
MinWidth
New in version 09
MinWidth
MinWidth
..MinWidth is used to find out and modify the minimum width of a control or window.
Versions 09 and later
Caption
New in version 09
Caption
Caption
In a database, ..Caption is used to:
  • Find out the caption associated with a file item.
  • Find out the caption associated with a data file.
  • Find out and modify the connection caption.
In a report, ..Caption is used to:
  • Find out the text displayed in a Static control or in a link control.
  • Modify the text displayed in a Static control or in a link control.
In a window or in a page, ..Caption is used to:
  • Find out and modify the caption of a control in a window or in a page.
  • Find out and modify the caption of a menu option.
  • Find out and modify the title of a window or page.
  • Find out the content of a site map path.
Versions 09 and later
PopupMenu
New in version 09
PopupMenu
PopupMenu
..PopupMenu is used to:
  • Find out the custom popup menu associated with a control or window.
  • Modify the popup menu associated with a control or window (associate another popup menu with the control or window).
  • Customize the system menus of controls by adding options.
Versions 11 and later
Message
New in version 11
Message
Message
..Message is used to:
  • Find out the help message associated with a control or with a menu option (in a window).
  • Modify the help message associated with a control or with a menu option (in a window).
Versions 21 and later
TransparencyMode
New in version 21
TransparencyMode
TransparencyMode
..TransparencyMode is used to find out and modify the transparency mode of an image.
Versions 09 and later
Modified
New in version 09
Modified
Modified
..Modified is used to find out whether a control (or a group of controls) was modified by the user (with the keyboard or with the mouse.
Versions 09 and later
Name
New in version 09
Name
Name
..Name is used to find out:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
Versions 09 and later
NumberPage
New in version 09
NumberPage
NumberPage
..NumberPage is used to find out:
  • the number of pages found in a "multi-page" image file. This image is displayed in an Image control or in the background of a Chart control.
  • the number of pages found in a PDF file displayed in an Image control.
  • Versions 23 and later
    WINDEV the number of pages found in a PDF file displayed in a PDF Reader control.
    New in version 23
    WINDEV the number of pages found in a PDF file displayed in a PDF Reader control.
    WINDEV the number of pages found in a PDF file displayed in a PDF Reader control.
  • Versions 23 and later
    WINDEV the number of pages found in a DOCX file displayed in a Word Processing control.
    New in version 23
    WINDEV the number of pages found in a DOCX file displayed in a Word Processing control.
    WINDEV the number of pages found in a DOCX file displayed in a Word Processing control.
Versions 09 and later
FullName
New in version 09
FullName
FullName
..FullName is used to find out the full name:
  • of a control.
  • of a window.
  • of a menu option.
  • of a table column.
Versions 09 and later
Note
New in version 09
Note
Note
..Note is used to:
  • Find out the notes associated with a control, a window or a page.
  • Modify the notes associated with a control, a window or a page.
Versions 09 and later
HelpNumber
New in version 09
HelpNumber
HelpNumber
..HelpNumber is used to find out and modify the help number associated with a control.
Versions 09 and later
PageNumber
New in version 09
PageNumber
PageNumber
..PageNumber is used to
  • find out and modify the number of the page displayed in an image control ("multi-page" image files)
  • find out and modify the page number of a PDF file displayed in an image control of a window
  • find out and modify the page number of a PDF file displayed in report background
Versions 12 and later
Occurrence
New in version 12
Occurrence
Occurrence
..Occurrence is used to find out the number of elements found in a set.
Versions 09 and later
Opacity
New in version 09
Opacity
Opacity
..Opacity is used to find out and define the percentage of opacity for a window or for the controls found in a window or in a page.
Versions 20 and later
CrosshairOpacity
New in version 20
CrosshairOpacity
CrosshairOpacity
..CrosshairOpacity is used to find out and modify the opacity of the crosshair for a Chart control.
Versions 09 and later
Plane
New in version 09
Plane
Plane
..Plane is used to:
  • Find out:
    • the active plane of a window (or report) or the plane to which a control belongs.
    • the active plane of a WEBDEV element.
  • Modify:
    • the active plane of a window (or report) or associate a control with another plane.
    • the active plane of a WEBDEV element.
Versions 15 and later
TextDirection
New in version 15
TextDirection
TextDirection
..TextDirection is used to find out and modify the writing direction used in a window, in a report or in a control (useful for managing languages such as Arabic or Hebrew).
Versions 20 and later
Style
New in version 20
Style
Style
..Style is used to find out and assign the entire style of a control (including the overloads).
Versions 09 and later
AnchorRateBottom
New in version 09
AnchorRateBottom
AnchorRateBottom
..AnchorRateBottom is used to:
  • Find out the anchor rate when a control moves on the vertical axis.
  • Modify the anchor rate when a control moves on the vertical axis.
Versions 09 and later
AnchorRateRight
New in version 09
AnchorRateRight
AnchorRateRight
..AnchorRateRight is used to:
  • Find out the anchor rate when a control moves on the horizontal axis.
  • Modify the anchor rate when a control moves on the horizontal axis.
Versions 09 and later
AnchorRateHeight
New in version 09
AnchorRateHeight
AnchorRateHeight
..AnchorRateHeight is used to:
  • Find out the anchor rate in height of a control.
  • Modify the anchor rate in height of a control.
Versions 09 and later
AnchorRateWidth
New in version 09
AnchorRateWidth
AnchorRateWidth
..AnchorRateWidth is used to:
  • Find out the anchor rate when a control (or a table column) stretches on the horizontal axis.
  • Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
Versions 21 and later
ParallaxRateHeight
New in version 21
ParallaxRateHeight
ParallaxRateHeight
..ParallaxRateHeight is used to find out and specify the speed at which a control is reduced when the scrollbar found in the window, the internal window or the page moves.
Versions 21 and later
ParallaxRateY
New in version 21
ParallaxRateY
ParallaxRateY
..ParallaxRateY is used to find out and specify the speed at which a control moves when the scrollbar found in the window, the internal window or the page moves.
Versions 09 and later
Title
New in version 09
Title
Title
..Title is used to:
  • Find out the title of a table column, Chart control, window or page
  • Modify the title of a table column, Chart control, window or page.
Versions 09 and later
NoteTitle
New in version 09
NoteTitle
NoteTitle
..NoteTitle is used to:
  • Find out the title of the notes used in the program documentation of a window, control or page
  • Modify the title of the notes used in the program documentation of a control, window or page.
Versions 19 and later
Process
New in version 19
Process
Process
..Process is used to modify the processes that must be run by the events available on a control, window, page, report, ...
Versions 09 and later
Type
New in version 09
Type
Type
..Type is used to find out:
  • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
  • the type of object.
  • the type of value stored in a variant.
Versions 09 and later
Value
New in version 09
Value
Value
..Value is used to:
  • Find out and modify the value of a report control.
  • Find out and modify the value of a control or the title of a window.
  • Find out the identifier of a stream.
  • Find out and modify the value of a control or the title of a page.
Versions 09 and later
InitialValue
New in version 09
InitialValue
InitialValue
..InitialValue is used to find out the initial value of a control found in a window or in a page.
Versions 09 and later
Empty
New in version 09
Empty
Empty
..Empty is used to find out whether:
  • a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control.
  • a Chart control contains no series.
  • a report control is empty (control linked to an item).
  • an array (or an associative array) contains no element.
  • an element of an associative array exists or not.
  • a queue, a list or a stack contains no element.
Versions 09 and later
Visible
New in version 09
Visible
Visible
..Visible is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
Versions 09 and later
InitialVisible
New in version 09
InitialVisible
InitialVisible
..InitialVisible is used to find out whether:
  • a control was visible during the first display of associated window or page.
  • a window was visible during its first display.
Versions 19 and later
Pane
New in version 19
Pane
Pane
..Pane is used to:
  • Find out the pane tabs associated with a control.
  • Define the pane tabs associated with a control.
Versions 09 and later
X
New in version 09
X
X
..X is used to:
  • Find out the X coordinate of a control, of a Table control column or of a window (position on X axis).
  • Modify the X coordinate of a control or window (position on X axis).
Versions 09 and later
XImage
New in version 09
XImage
XImage
..XImage is used to find out and modify the origin (X coordinate) of the image section that will be displayed in an image control or in the background of a chart control.
Versions 09 and later
XInitial
New in version 09
XInitial
XInitial
..XInitial is used to:
  • Find out the X coordinate of a control or window (position on X axis) when opening the window.
  • Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
  • Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report
Versions 09 and later
Y
New in version 09
Y
Y
..Y is used to:
  • Find out the Y coordinate of a control or window (position on Y axis).
  • Modify the Y coordinate of a control or window.
Versions 09 and later
YImage
New in version 09
YImage
YImage
..YImage is used to find out and modify the origin (Y coordinate) of the image section that will be displayed in an Image control or in the background of a Chart control.
Versions 09 and later
YInitial
New in version 09
YInitial
YInitial
..YInitial is used to:
  • Find out the Y coordinate:
    • of a control (position on Y axis) when opening the window or the page.
    • of a window (position on Y axis) when opening the window.
  • Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
Note: Some properties may not be available according to the platform used. See the help page about the property for more details.
Properties available for the Chart controls found in a page
WEBDEV - Server code

Properties associated with the Chart control in a page (server code)

Versions 09 and later
Alias
New in version 09
Alias
Alias
..Alias is used to:
  • find out or modify the alias of a window (WINDEV)
  • Find out and modify the alias of a dynamic tab pane (WINDEV)
  • find out the internal HTML/Javascript name of a control (WEBDEV).
Versions 09 and later
ToolTip
New in version 09
ToolTip
ToolTip
..ToolTip is used to find out and modify the text displayed in the tooltip associated with a control found in a window or in a page.
Versions 20 and later
HTMLClass
New in version 20
HTMLClass
HTMLClass
..HTMLClass is used to read and modify the value of the HTML "class" attribute of the control.
Versions 09 and later
BrushColor
New in version 09
BrushColor
BrushColor
..BrushColor is used to manage the background color of a control, window, page or report block.
Versions 20 and later
CrosshairColor
New in version 20
CrosshairColor
CrosshairColor
..CrosshairColor is used to find out and modify the color of the crosshair for a Chart control.
Versions 09 and later
MouseCursor
New in version 09
MouseCursor
MouseCursor
..MouseCursor is used to find out and modify the rollover cursor defined for a control, a window or a page.
Versions 19 and later
AnimationDuration
New in version 19
AnimationDuration
AnimationDuration
..AnimationDuration is used to find out and modify the duration of animation:
  • in a Chart control. This duration is set to 30 hundredths of a second by default.
  • in an infinite progress bar control. This duration is set to 200 hundredths of a second by default.
Versions 20 and later
CrosshairThickness
New in version 20
CrosshairThickness
CrosshairThickness
..CrosshairThickness is used to find out and modify the thickness of the crosshair for a Chart control.
Versions 09 and later
State
New in version 09
State
State
..State is used to find out and modify the display status of an element.
Versions 09 and later
InitialState
New in version 09
InitialState
InitialState
..InitialState is used to find out the initial status of a control.
Versions 17 and later
Grayed
New in version 17
Grayed
Grayed
..Grayed is used to:
  • Find out whether a control (or a group of controls) is grayed or not.
  • Gray or ungray a control or a group of controls.
Versions 09 and later
Group
New in version 09
Group
Group
..Group is used to:
  • find out whether the control belongs to a group of controls. If the control belongs to one or more groups, ..Group is used to identify these groups of controls.
  • associate a control with a group of controls.
Versions 09 and later
Height
New in version 09
Height
Height
..Height is used to find out and modify the height:
  • of a control or block in a report.
  • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
  • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
Versions 12 and later
HTMLAfter
New in version 12
HTMLAfter
HTMLAfter
..HTMLAfter used to find out and modify the HTML code added after the control.
Versions 12 and later
HTMLBefore
New in version 12
HTMLBefore
HTMLBefore
..HTMLBefore used to find out and modify the HTML code added before the control.
Versions 09 and later
Image
New in version 09
Image
Image
..Image is used to find out and modify the background image associated with a control or with a block.
Versions 09 and later
ImageMode
New in version 09
ImageMode
ImageMode
..ImageMode is used to find out and modify the display mode of an image in an Image control, in an Image table column and in the background of a Chart control found in a window.
Versions 09 and later
Width
New in version 09
Width
Width
..Width is used to find out and modify the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be stackable or not.
Versions 09 and later
Caption
New in version 09
Caption
Caption
In a database, ..Caption is used to:
  • Find out the caption associated with a file item.
  • Find out the caption associated with a data file.
  • Find out and modify the connection caption.
In a report, ..Caption is used to:
  • Find out the text displayed in a Static control or in a link control.
  • Modify the text displayed in a Static control or in a link control.
In a window or in a page, ..Caption is used to:
  • Find out and modify the caption of a control in a window or in a page.
  • Find out and modify the caption of a menu option.
  • Find out and modify the title of a window or page.
  • Find out the content of a site map path.
Versions 09 and later
Name
New in version 09
Name
Name
..Name is used to find out:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
Versions 09 and later
FullName
New in version 09
FullName
FullName
..FullName is used to find out the full name:
  • of a control.
  • of a window.
  • of a menu option.
  • of a table column.
Versions 09 and later
Note
New in version 09
Note
Note
..Note is used to:
  • Find out the notes associated with a control, a window or a page.
  • Modify the notes associated with a control, a window or a page.
Versions 12 and later
Occurrence
New in version 12
Occurrence
Occurrence
..Occurrence is used to find out the number of elements found in a set.
Versions 09 and later
Opacity
New in version 09
Opacity
Opacity
..Opacity is used to find out and define the percentage of opacity for a window or for the controls found in a window or in a page.
Versions 20 and later
CrosshairOpacity
New in version 20
CrosshairOpacity
CrosshairOpacity
..CrosshairOpacity is used to find out and modify the opacity of the crosshair for a Chart control.
Versions 21 and later
AlternativeText
New in version 21
AlternativeText
AlternativeText
..AlternativeText is used to find out and modify the alternative text for the page controls.
Versions 09 and later
Title
New in version 09
Title
Title
..Title is used to:
  • Find out the title of a table column, Chart control, window or page
  • Modify the title of a table column, Chart control, window or page.
Versions 09 and later
NoteTitle
New in version 09
NoteTitle
NoteTitle
..NoteTitle is used to:
  • Find out the title of the notes used in the program documentation of a window, control or page
  • Modify the title of the notes used in the program documentation of a control, window or page.
Versions 19 and later
Process
New in version 19
Process
Process
..Process is used to modify the processes that must be run by the events available on a control, window, page, report, ...
Versions 09 and later
Type
New in version 09
Type
Type
..Type is used to find out:
  • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
  • the type of object.
  • the type of value stored in a variant.
Versions 09 and later
Value
New in version 09
Value
Value
..Value is used to:
  • Find out and modify the value of a report control.
  • Find out and modify the value of a control or the title of a window.
  • Find out the identifier of a stream.
  • Find out and modify the value of a control or the title of a page.
Versions 09 and later
Empty
New in version 09
Empty
Empty
..Empty is used to find out whether:
  • a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control.
  • a Chart control contains no series.
  • a report control is empty (control linked to an item).
  • an array (or an associative array) contains no element.
  • an element of an associative array exists or not.
  • a queue, a list or a stack contains no element.
Versions 09 and later
Visible
New in version 09
Visible
Visible
..Visible is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
Versions 09 and later
InitialVisible
New in version 09
InitialVisible
InitialVisible
..InitialVisible is used to find out whether:
  • a control was visible during the first display of associated window or page.
  • a window was visible during its first display.
Versions 09 and later
X
New in version 09
X
X
..X is used to:
  • Find out the X coordinate of a control, of a Table control column or of a window (position on X axis).
  • Modify the X coordinate of a control or window (position on X axis).
Versions 09 and later
XInitial
New in version 09
XInitial
XInitial
..XInitial is used to:
  • Find out the X coordinate of a control or window (position on X axis) when opening the window.
  • Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
  • Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report
Versions 09 and later
Y
New in version 09
Y
Y
..Y is used to:
  • Find out the Y coordinate of a control or window (position on Y axis).
  • Modify the Y coordinate of a control or window.
Versions 09 and later
YInitial
New in version 09
YInitial
YInitial
..YInitial is used to:
  • Find out the Y coordinate:
    • of a control (position on Y axis) when opening the window or the page.
    • of a window (position on Y axis) when opening the window.
  • Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
WEBDEV - Browser code

Properties associated with the Chart control in a page (browser code)

Versions 14 and later
XAxisMax
New in version 14
XAxisMax
XAxisMax
..XAxisMax is used to find out the upper bound on the X axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 14 and later
XAxisMin
New in version 14
XAxisMin
XAxisMin
..XAxisMin is used to find out the lower bound on the X axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 14 and later
YAxisMax
New in version 14
YAxisMax
YAxisMax
..YAxisMax is used to find out the upper bound on the Y axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 14 and later
YAxisMin
New in version 14
YAxisMin
YAxisMin
..YAxisMin is used to find out the lower bound on the Y axis for a Chart control. This property can be used in the zoom process of a chart to identify the section displayed.
Versions 09 and later
ToolTip
New in version 09
ToolTip
ToolTip
..ToolTip is used to find out and modify the text displayed in the tooltip associated with a control found in a window or in a page.
Versions 20 and later
HTMLClass
New in version 20
HTMLClass
HTMLClass
..HTMLClass is used to read and modify the value of the HTML "class" attribute of the control.
Versions 09 and later
MouseCursor
New in version 09
MouseCursor
MouseCursor
..MouseCursor is used to find out and modify the rollover cursor defined for a control, a window or a page.
Versions 19 and later
AnimationDuration
New in version 19
AnimationDuration
AnimationDuration
..AnimationDuration is used to find out and modify the duration of animation:
  • in a Chart control. This duration is set to 30 hundredths of a second by default.
  • in an infinite progress bar control. This duration is set to 200 hundredths of a second by default.
Versions 09 and later
State
New in version 09
State
State
..State is used to find out and modify the display status of an element.
Versions 09 and later
InitialState
New in version 09
InitialState
InitialState
..InitialState is used to find out the initial status of a control.
Versions 17 and later
Grayed
New in version 17
Grayed
Grayed
..Grayed is used to:
  • Find out whether a control (or a group of controls) is grayed or not.
  • Gray or ungray a control or a group of controls.
Versions 09 and later
Height
New in version 09
Height
Height
..Height is used to find out and modify the height:
  • of a control or block in a report.
  • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
  • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
Versions 09 and later
Width
New in version 09
Width
Width
..Width is used to find out and modify the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be stackable or not.
Versions 09 and later
Caption
New in version 09
Caption
Caption
In a database, ..Caption is used to:
  • Find out the caption associated with a file item.
  • Find out the caption associated with a data file.
  • Find out and modify the connection caption.
In a report, ..Caption is used to:
  • Find out the text displayed in a Static control or in a link control.
  • Modify the text displayed in a Static control or in a link control.
In a window or in a page, ..Caption is used to:
  • Find out and modify the caption of a control in a window or in a page.
  • Find out and modify the caption of a menu option.
  • Find out and modify the title of a window or page.
  • Find out the content of a site map path.
Versions 09 and later
Note
New in version 09
Note
Note
..Note is used to:
  • Find out the notes associated with a control, a window or a page.
  • Modify the notes associated with a control, a window or a page.
Versions 09 and later
Opacity
New in version 09
Opacity
Opacity
..Opacity is used to find out and define the percentage of opacity for a window or for the controls found in a window or in a page.
Versions 21 and later
AlternativeText
New in version 21
AlternativeText
AlternativeText
..AlternativeText is used to find out and modify the alternative text for the page controls.
Versions 09 and later
Title
New in version 09
Title
Title
..Title is used to:
  • Find out the title of a table column, Chart control, window or page
  • Modify the title of a table column, Chart control, window or page.
Versions 09 and later
NoteTitle
New in version 09
NoteTitle
NoteTitle
..NoteTitle is used to:
  • Find out the title of the notes used in the program documentation of a window, control or page
  • Modify the title of the notes used in the program documentation of a control, window or page.
Versions 09 and later
Type
New in version 09
Type
Type
..Type is used to find out:
  • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
  • the type of object.
  • the type of value stored in a variant.
Versions 09 and later
Visible
New in version 09
Visible
Visible
..Visible is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
Versions 09 and later
InitialVisible
New in version 09
InitialVisible
InitialVisible
..InitialVisible is used to find out whether:
  • a control was visible during the first display of associated window or page.
  • a window was visible during its first display.
Versions 09 and later
X
New in version 09
X
X
..X is used to:
  • Find out the X coordinate of a control, of a Table control column or of a window (position on X axis).
  • Modify the X coordinate of a control or window (position on X axis).
Versions 09 and later
XInitial
New in version 09
XInitial
XInitial
..XInitial is used to:
  • Find out the X coordinate of a control or window (position on X axis) when opening the window.
  • Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
  • Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report
Versions 09 and later
Y
New in version 09
Y
Y
..Y is used to:
  • Find out the Y coordinate of a control or window (position on Y axis).
  • Modify the Y coordinate of a control or window.
Versions 09 and later
YInitial
New in version 09
YInitial
YInitial
..YInitial is used to:
  • Find out the Y coordinate:
    • of a control (position on Y axis) when opening the window or the page.
    • of a window (position on Y axis) when opening the window.
  • Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
PHP

Properties associated with the Chart control in a page (PHP)

Versions 09 and later
Alias
New in version 09
Alias
Alias
..Alias is used to:
  • find out or modify the alias of a window (WINDEV)
  • Find out and modify the alias of a dynamic tab pane (WINDEV)
  • find out the internal HTML/Javascript name of a control (WEBDEV).
Versions 20 and later
HTMLClass
New in version 20
HTMLClass
HTMLClass
..HTMLClass is used to read and modify the value of the HTML "class" attribute of the control.
Versions 09 and later
Color
New in version 09
Color
Color
..Color is used to find out and modify the font color for:
  • a font variable.
  • a text displayed in a Static control or in a calculated control of a report.
  • a text displayed in a window control.
  • a text displayed in a page control.
Versions 09 and later
BrushColor
New in version 09
BrushColor
BrushColor
..BrushColor is used to manage the background color of a control, window, page or report block.
Versions 20 and later
CrosshairColor
New in version 20
CrosshairColor
CrosshairColor
..CrosshairColor is used to find out and modify the color of the crosshair for a Chart control.
Versions 19 and later
AnimationDuration
New in version 19
AnimationDuration
AnimationDuration
..AnimationDuration is used to find out and modify the duration of animation:
  • in a Chart control. This duration is set to 30 hundredths of a second by default.
  • in an infinite progress bar control. This duration is set to 200 hundredths of a second by default.
Versions 20 and later
CrosshairThickness
New in version 20
CrosshairThickness
CrosshairThickness
..CrosshairThickness is used to find out and modify the thickness of the crosshair for a Chart control.
Versions 09 and later
InitialState
New in version 09
InitialState
InitialState
..InitialState is used to find out the initial status of a control.
Versions 09 and later
Height
New in version 09
Height
Height
..Height is used to find out and modify the height:
  • of a control or block in a report.
  • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
  • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
Versions 09 and later
Width
New in version 09
Width
Width
..Width is used to find out and modify the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be stackable or not.
Versions 09 and later
Caption
New in version 09
Caption
Caption
In a database, ..Caption is used to:
  • Find out the caption associated with a file item.
  • Find out the caption associated with a data file.
  • Find out and modify the connection caption.
In a report, ..Caption is used to:
  • Find out the text displayed in a Static control or in a link control.
  • Modify the text displayed in a Static control or in a link control.
In a window or in a page, ..Caption is used to:
  • Find out and modify the caption of a control in a window or in a page.
  • Find out and modify the caption of a menu option.
  • Find out and modify the title of a window or page.
  • Find out the content of a site map path.
Versions 09 and later
Name
New in version 09
Name
Name
..Name is used to find out:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
Versions 09 and later
Note
New in version 09
Note
Note
..Note is used to:
  • Find out the notes associated with a control, a window or a page.
  • Modify the notes associated with a control, a window or a page.
Versions 20 and later
CrosshairOpacity
New in version 20
CrosshairOpacity
CrosshairOpacity
..CrosshairOpacity is used to find out and modify the opacity of the crosshair for a Chart control.
Versions 21 and later
AlternativeText
New in version 21
AlternativeText
AlternativeText
..AlternativeText is used to find out and modify the alternative text for the page controls.
Versions 09 and later
NoteTitle
New in version 09
NoteTitle
NoteTitle
..NoteTitle is used to:
  • Find out the title of the notes used in the program documentation of a window, control or page
  • Modify the title of the notes used in the program documentation of a control, window or page.
Versions 09 and later
Type
New in version 09
Type
Type
..Type is used to find out:
  • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
  • the type of object.
  • the type of value stored in a variant.
Versions 09 and later
Visible
New in version 09
Visible
Visible
..Visible is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
Versions 09 and later
InitialVisible
New in version 09
InitialVisible
InitialVisible
..InitialVisible is used to find out whether:
  • a control was visible during the first display of associated window or page.
  • a window was visible during its first display.
Versions 09 and later
X
New in version 09
X
X
..X is used to:
  • Find out the X coordinate of a control, of a Table control column or of a window (position on X axis).
  • Modify the X coordinate of a control or window (position on X axis).
Versions 09 and later
XInitial
New in version 09
XInitial
XInitial
..XInitial is used to:
  • Find out the X coordinate of a control or window (position on X axis) when opening the window.
  • Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
  • Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report
Versions 09 and later
Y
New in version 09
Y
Y
..Y is used to:
  • Find out the Y coordinate of a control or window (position on Y axis).
  • Modify the Y coordinate of a control or window.
Versions 09 and later
YInitial
New in version 09
YInitial
YInitial
..YInitial is used to:
  • Find out the Y coordinate:
    • of a control (position on Y axis) when opening the window or the page.
    • of a window (position on Y axis) when opening the window.
  • Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
Properties available for the Chart controls found in a report

Properties associated with the Chart control in a report

The following properties can be used with the "Chart" controls found in a report:
Versions 12 and later
Border
New in version 12
Border
Border
..Border is used to find out and modify the border characteristics:
  • for a report control or for a report block.
  • for a window control.
  • for a table cell.
Versions 09 and later
FullName
New in version 09
FullName
FullName
..FullName is used to find out the full name:
  • of a control.
  • of a window.
  • of a menu option.
  • of a table column.
Versions 09 and later
Group
New in version 09
Group
Group
..Group is used to:
  • find out whether the control belongs to a group of controls. If the control belongs to one or more groups, ..Group is used to identify these groups of controls.
  • associate a control with a group of controls.
Versions 09 and later
Height
New in version 09
Height
Height
..Height is used to find out and modify the height:
  • of a control or block in a report.
  • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
  • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
Versions 09 and later
HeightInPixel
New in version 09
HeightInPixel
HeightInPixel
..HeightInPixel is used to find out the height of a report control in pixels.
Versions 09 and later
InitialHeight
New in version 09
InitialHeight
InitialHeight
..InitialHeight is used to:
  • Find out the creation height of a control or window.
  • Modify the base height used to anchor the controls "in height".
  • Find out the creation height of a block or control in a report.
Versions 09 and later
InitialWidth
New in version 09
InitialWidth
InitialWidth
..InitialWidth is used to:
  • Find out the initial width of a control or window.
  • Modify the base width used to anchor the controls in "width".
  • Find out the initial width of a report control.
Versions 09 and later
Name
New in version 09
Name
Name
..Name is used to find out:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
Versions 09 and later
Note
New in version 09
Note
Note
..Note is used to:
  • Find out the notes associated with a control, a window or a page.
  • Modify the notes associated with a control, a window or a page.
Versions 09 and later
NumberPage
New in version 09
NumberPage
NumberPage
..NumberPage is used to find out:
  • the number of pages found in a "multi-page" image file. This image is displayed in an Image control or in the background of a Chart control.
  • the number of pages found in a PDF file displayed in an Image control.
  • Versions 23 and later
    WINDEV the number of pages found in a PDF file displayed in a PDF Reader control.
    New in version 23
    WINDEV the number of pages found in a PDF file displayed in a PDF Reader control.
    WINDEV the number of pages found in a PDF file displayed in a PDF Reader control.
  • Versions 23 and later
    WINDEV the number of pages found in a DOCX file displayed in a Word Processing control.
    New in version 23
    WINDEV the number of pages found in a DOCX file displayed in a Word Processing control.
    WINDEV the number of pages found in a DOCX file displayed in a Word Processing control.
Versions 09 and later
State
New in version 09
State
State
..State is used to find out and modify the display status of an element.
Versions 09 and later
Visible
New in version 09
Visible
Visible
..Visible is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
Versions 09 and later
Width
New in version 09
Width
Width
..Width is used to find out and modify the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be stackable or not.
Versions 09 and later
WidthInPixel
New in version 09
WidthInPixel
WidthInPixel
..WidthInPixel is used to find out the width of a report control in pixels.
Versions 09 and later
XInitial
New in version 09
XInitial
XInitial
..XInitial is used to:
  • Find out the X coordinate of a control or window (position on X axis) when opening the window.
  • Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
  • Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report
Versions 09 and later
YInitial
New in version 09
YInitial
YInitial
..YInitial is used to:
  • Find out the Y coordinate:
    • of a control (position on Y axis) when opening the window or the page.
    • of a window (position on Y axis) when opening the window.
  • Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
Versions 09 and later
ZOrder
New in version 09
ZOrder
ZOrder
..ZOrder is used to manage the z-order position of a control.
Versions 09 and later
ZOrder
New in version 09
ZOrder
ZOrder
..ZOrder is used to manage the z-order position of a control.
Versions 09 and later
Anchor
New in version 09
Anchor
Anchor
..Anchor is used to manage the anchor of a control in a window or report.
Versions 09 and later
HorizontalAlignment
New in version 09
HorizontalAlignment
HorizontalAlignment
..HorizontalAlignment is used to find out and modify the horizontal alignment of a control.
Versions 09 and later
VerticalAlignment
New in version 09
VerticalAlignment
VerticalAlignment
..VerticalAlignment is used to find out and modify the vertical alignment of a control.
Versions 14 and later
Border
New in version 14
Border
Border
..Border is used to find out and modify the border characteristics:
  • for a report control or for a report block.
  • for a window control.
  • for a table cell.
Versions 09 and later
BrushColor
New in version 09
BrushColor
BrushColor
..BrushColor is used to manage the background color of a control, window, page or report block.
Versions 12 and later
RightToLeft
New in version 12
RightToLeft
RightToLeft
..RightToLeft is used to find out the actual writing direction, effective on a control, a column, a window or a report.
Versions 09 and later
State
New in version 09
State
State
..State is used to find out and modify the display status of an element.
Versions 09 and later
Group
New in version 09
Group
Group
..Group is used to:
  • find out whether the control belongs to a group of controls. If the control belongs to one or more groups, ..Group is used to identify these groups of controls.
  • associate a control with a group of controls.
Versions 09 and later
Height
New in version 09
Height
Height
..Height is used to find out and modify the height:
  • of a control or block in a report.
  • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
  • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
Versions 09 and later
InitialHeight
New in version 09
InitialHeight
InitialHeight
..InitialHeight is used to:
  • Find out the creation height of a control or window.
  • Modify the base height used to anchor the controls "in height".
  • Find out the creation height of a block or control in a report.
Versions 09 and later
HeightInPixel
New in version 09
HeightInPixel
HeightInPixel
..HeightInPixel is used to find out the height of a report control in pixels.
Versions 09 and later
Image
New in version 09
Image
Image
..Image is used to find out and modify the background image associated with a control or with a block.
Versions 09 and later
Width
New in version 09
Width
Width
..Width is used to find out and modify the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be stackable or not.
Versions 09 and later
InitialWidth
New in version 09
InitialWidth
InitialWidth
..InitialWidth is used to:
  • Find out the initial width of a control or window.
  • Modify the base width used to anchor the controls in "width".
  • Find out the initial width of a report control.
Versions 09 and later
WidthInPixel
New in version 09
WidthInPixel
WidthInPixel
..WidthInPixel is used to find out the width of a report control in pixels.
Versions 09 and later
Caption
New in version 09
Caption
Caption
In a database, ..Caption is used to:
  • Find out the caption associated with a file item.
  • Find out the caption associated with a data file.
  • Find out and modify the connection caption.
In a report, ..Caption is used to:
  • Find out the text displayed in a Static control or in a link control.
  • Modify the text displayed in a Static control or in a link control.
In a window or in a page, ..Caption is used to:
  • Find out and modify the caption of a control in a window or in a page.
  • Find out and modify the caption of a menu option.
  • Find out and modify the title of a window or page.
  • Find out the content of a site map path.
Versions 09 and later
Name
New in version 09
Name
Name
..Name is used to find out:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
Versions 09 and later
Plane
New in version 09
Plane
Plane
..Plane is used to:
  • Find out:
    • the active plane of a window (or report) or the plane to which a control belongs.
    • the active plane of a WEBDEV element.
  • Modify:
    • the active plane of a window (or report) or associate a control with another plane.
    • the active plane of a WEBDEV element.
Versions 15 and later
TextDirection
New in version 15
TextDirection
TextDirection
..TextDirection is used to find out and modify the writing direction used in a window, in a report or in a control (useful for managing languages such as Arabic or Hebrew).
Versions 09 and later
AnchorRateBottom
New in version 09
AnchorRateBottom
AnchorRateBottom
..AnchorRateBottom is used to:
  • Find out the anchor rate when a control moves on the vertical axis.
  • Modify the anchor rate when a control moves on the vertical axis.
Versions 09 and later
AnchorRateRight
New in version 09
AnchorRateRight
AnchorRateRight
..AnchorRateRight is used to:
  • Find out the anchor rate when a control moves on the horizontal axis.
  • Modify the anchor rate when a control moves on the horizontal axis.
Versions 09 and later
AnchorRateHeight
New in version 09
AnchorRateHeight
AnchorRateHeight
..AnchorRateHeight is used to:
  • Find out the anchor rate in height of a control.
  • Modify the anchor rate in height of a control.
Versions 09 and later
AnchorRateWidth
New in version 09
AnchorRateWidth
AnchorRateWidth
..AnchorRateWidth is used to:
  • Find out the anchor rate when a control (or a table column) stretches on the horizontal axis.
  • Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
Versions 09 and later
Title
New in version 09
Title
Title
..Title is used to:
  • Find out the title of a table column, Chart control, window or page
  • Modify the title of a table column, Chart control, window or page.
Versions 19 and later
Process
New in version 19
Process
Process
..Process is used to modify the processes that must be run by the events available on a control, window, page, report, ...
Versions 09 and later
Value
New in version 09
Value
Value
..Value is used to:
  • Find out and modify the value of a report control.
  • Find out and modify the value of a control or the title of a window.
  • Find out the identifier of a stream.
  • Find out and modify the value of a control or the title of a page.
Versions 09 and later
Empty
New in version 09
Empty
Empty
..Empty is used to find out whether:
  • a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control.
  • a Chart control contains no series.
  • a report control is empty (control linked to an item).
  • an array (or an associative array) contains no element.
  • an element of an associative array exists or not.
  • a queue, a list or a stack contains no element.
Versions 09 and later
Visible
New in version 09
Visible
Visible
..Visible is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
Versions 09 and later
X
New in version 09
X
X
..X is used to:
  • Find out the X coordinate of a control, of a Table control column or of a window (position on X axis).
  • Modify the X coordinate of a control or window (position on X axis).
Versions 09 and later
XInitial
New in version 09
XInitial
XInitial
..XInitial is used to:
  • Find out the X coordinate of a control or window (position on X axis) when opening the window.
  • Modify the X coordinate of a control anchored "to right" (position on X axis) when opening the window.
  • Find out the X coordinate of a control in relation to its block (position in millimeters on X axis) when opening the report
Versions 09 and later
Y
New in version 09
Y
Y
..Y is used to:
  • Find out the Y coordinate of a control or window (position on Y axis).
  • Modify the Y coordinate of a control or window.
Versions 09 and later
YInitial
New in version 09
YInitial
YInitial
..YInitial is used to:
  • Find out the Y coordinate:
    • of a control (position on Y axis) when opening the window or the page.
    • of a window (position on Y axis) when opening the window.
  • Modify the Y coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
Minimum required version
  • Version 9
This page is also available for…
Comments
Click [Add] to post a comment