PC SOFT

ONLINE HELP
FOR WINDEV, WEBDEV AND WINDEV MOBILE

  • Overview
  • Handling the break headers and footers
  • Functions associated with break headers and footers
  • Properties associated with the break headers and footers
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
Overview
Several properties can be used with the breaks headers and footers found in a looper. These properties can be used in a window or in a page.
To use these properties, the syntax is as follows:
<Looper Name>.<Name of Break Header/Footer>..<Property Name> = <Value>
or
<Name of Break Header/Footer>..<Property Name> = <Value>
Note: These code lines must be found in the "Display process of a row found in the break header/footer".
Handling the break headers and footers

Functions associated with break headers and footers

The following functions are associated with the break headers and footers:
Versions 10 and later
LooperBreakSubscript
New in version 10
LooperBreakSubscript
LooperBreakSubscript
Returns the subscript of the break header and footer for a given break in a Looper control.
Versions 17 and later
LooperCollapse
New in version 17
LooperCollapse
LooperCollapse
Collapses a break that was expanded beforehand in a Looper control.
Versions 17 and later
LooperCollapseAll
New in version 17
LooperCollapseAll
LooperCollapseAll
Collapses all the expanded breaks in a Looper control.
Versions 17 and later
LooperCollapseExpand
New in version 17
LooperCollapseExpand
LooperCollapseExpand
On a given row in a Looper control:
  • collapses a break (if it is expanded),
  • expands a break (if it is collapsed).
Versions 17 and later
LooperExpand
New in version 17
LooperExpand
LooperExpand
Expands a break in the Looper control on a given row.
Versions 17 and later
LooperExpandAll
New in version 17
LooperExpandAll
LooperExpandAll
Expands all the breaks in a Looper control with break.
Versions 22 and later
WINDEV Several WLanguage functions can be used to create breaks by programming:
Versions 22 and later
BreakAdd
New in version 22
BreakAdd
BreakAdd
Adds a break into a Table control or into a Looper control.
Versions 22 and later
BreakDelete
New in version 22
BreakDelete
BreakDelete
Deletes a break from a Table control or from a Looper control.
Versions 22 and later
BreakDeleteAll
New in version 22
BreakDeleteAll
BreakDeleteAll
Deletes all the breaks from a Table control or from a Looper control.
New in version 22
WINDEV Several WLanguage functions can be used to create breaks by programming:
Versions 22 and later
BreakAdd
New in version 22
BreakAdd
BreakAdd
Adds a break into a Table control or into a Looper control.
Versions 22 and later
BreakDelete
New in version 22
BreakDelete
BreakDelete
Deletes a break from a Table control or from a Looper control.
Versions 22 and later
BreakDeleteAll
New in version 22
BreakDeleteAll
BreakDeleteAll
Deletes all the breaks from a Table control or from a Looper control.
WINDEV Several WLanguage functions can be used to create breaks by programming:
Versions 22 and later
BreakAdd
New in version 22
BreakAdd
BreakAdd
Adds a break into a Table control or into a Looper control.
Versions 22 and later
BreakDelete
New in version 22
BreakDelete
BreakDelete
Deletes a break from a Table control or from a Looper control.
Versions 22 and later
BreakDeleteAll
New in version 22
BreakDeleteAll
BreakDeleteAll
Deletes all the breaks from a Table control or from a Looper control.

Properties associated with the break headers and footers

The following properties are associated with the break headers and footers:
  • WINDEV In a window:
    Versions 09 and later
    BrushColor
    New in version 09
    BrushColor
    BrushColor
    ..BrushColor is used to manage the background color of a control, window, page or report block.
    Versions 11 and later
    Collapsed
    New in version 11
    Collapsed
    Collapsed
    ..Collapsed is used to:
    • find out or define the status (collapsed or expanded) that will be used when rows are added into a Treeview Table control.
    • find out or modify the collapsed/expanded status for:
      • the breaks of a Table control,
      • the breaks of a Looper control,
      • a HideShow control,
      • a Ribbon control,
      • a Navigation Bar control.
      • a Pivot Table control in a report.
    Versions 09 and later
    Height
    New in version 09
    Height
    Height
    ..Height is used to find out and modify the height:
    • of a control or block in a report.
    • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
    • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
    Versions 09 and later
    Name
    New in version 09
    Name
    Name
    ..Name is used to find out:
    • the name of the font associated with a Font variable.
    • the name of a control, report or report block.
    • the name of a control, group of controls or window.
    • the name of a control, group of controls or page.
    Versions 19 and later
    Process
    New in version 19
    Process
    Process
    ..Process is used to modify the processes that must be run by the events available on a control, window, page, report, ...
    Versions 09 and later
    Type
    New in version 09
    Type
    Type
    ..Type is used to find out:
    • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
    • the type of object.
    • the type of value stored in a variant.
    Versions 09 and later
    Visible
    New in version 09
    Visible
    Visible
    ..Visible is used to:
    • Find out whether an element is visible.
    • Make an element visible or invisible.
    Versions 21 and later
    WinEditAllowed
    New in version 21
    WinEditAllowed
    WinEditAllowed
    ..WinEditAllowed is used to find out and modify the operations allowed on a control when the window switches to "Edit by the end user" mode.
  • WEBDEV - Server code In a page (server code):
    Versions 09 and later
    Alias
    New in version 09
    Alias
    Alias
    ..Alias is used to:
    • find out or modify the alias of a window (WINDEV)
    • Find out and modify the alias of a dynamic tab pane (WINDEV)
    • find out the internal HTML/Javascript name of a control (WEBDEV).
    Versions 11 and later
    Collapsed
    New in version 11
    Collapsed
    Collapsed
    ..Collapsed is used to:
    • find out or define the status (collapsed or expanded) that will be used when rows are added into a Treeview Table control.
    • find out or modify the collapsed/expanded status for:
      • the breaks of a Table control,
      • the breaks of a Looper control,
      • a HideShow control,
      • a Ribbon control,
      • a Navigation Bar control.
      • a Pivot Table control in a report.
    Versions 09 and later
    FullName
    New in version 09
    FullName
    FullName
    ..FullName is used to find out the full name:
    • of a control.
    • of a window.
    • of a menu option.
    • of a table column.
    Versions 09 and later
    Height
    New in version 09
    Height
    Height
    ..Height is used to find out and modify the height:
    • of a control or block in a report.
    • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
    • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
    Versions 09 and later
    InitialVisible
    New in version 09
    InitialVisible
    InitialVisible
    ..InitialVisible is used to find out whether:
    • a control was visible during the first display of associated window or page.
    • a window was visible during its first display.
    Versions 09 and later
    MouseCursor
    New in version 09
    MouseCursor
    MouseCursor
    ..MouseCursor is used to find out and modify the rollover cursor defined for a control, a window or a page.
    Versions 09 and later
    Name
    New in version 09
    Name
    Name
    ..Name is used to find out:
    • the name of the font associated with a Font variable.
    • the name of a control, report or report block.
    • the name of a control, group of controls or window.
    • the name of a control, group of controls or page.
    Versions 19 and later
    Process
    New in version 19
    Process
    Process
    ..Process is used to modify the processes that must be run by the events available on a control, window, page, report, ...
    Versions 09 and later
    Type
    New in version 09
    Type
    Type
    ..Type is used to find out:
    • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
    • the type of object.
    • the type of value stored in a variant.
    Versions 09 and later
    Visible
    New in version 09
    Visible
    Visible
    ..Visible is used to:
    • Find out whether an element is visible.
    • Make an element visible or invisible.
  • WEBDEV - Browser code In a page (browser code):
    Versions 11 and later
    Collapsed
    New in version 11
    Collapsed
    Collapsed
    ..Collapsed is used to:
    • find out or define the status (collapsed or expanded) that will be used when rows are added into a Treeview Table control.
    • find out or modify the collapsed/expanded status for:
      • the breaks of a Table control,
      • the breaks of a Looper control,
      • a HideShow control,
      • a Ribbon control,
      • a Navigation Bar control.
      • a Pivot Table control in a report.
    Versions 09 and later
    InitialVisible
    New in version 09
    InitialVisible
    InitialVisible
    ..InitialVisible is used to find out whether:
    • a control was visible during the first display of associated window or page.
    • a window was visible during its first display.
    Versions 09 and later
    Type
    New in version 09
    Type
    Type
    ..Type is used to find out:
    • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
    • the type of object.
    • the type of value stored in a variant.
  • PHP In a page (PHP):
    Versions 09 and later
    Alias
    New in version 09
    Alias
    Alias
    ..Alias is used to:
    • find out or modify the alias of a window (WINDEV)
    • Find out and modify the alias of a dynamic tab pane (WINDEV)
    • find out the internal HTML/Javascript name of a control (WEBDEV).
    Versions 11 and later
    Collapsed
    New in version 11
    Collapsed
    Collapsed
    ..Collapsed is used to:
    • find out or define the status (collapsed or expanded) that will be used when rows are added into a Treeview Table control.
    • find out or modify the collapsed/expanded status for:
      • the breaks of a Table control,
      • the breaks of a Looper control,
      • a HideShow control,
      • a Ribbon control,
      • a Navigation Bar control.
      • a Pivot Table control in a report.
    Versions 09 and later
    Height
    New in version 09
    Height
    Height
    ..Height is used to find out and modify the height:
    • of a control or block in a report.
    • of a control (found in a window), window, row found in a table, in a list box or in a listview, option found in a radio button or in a check box, break header or break footer found in a table or in a looper.
    • of a control (found in a page), break header or break footer found in a table or in a looper. The control can be stackable or not.
    Versions 09 and later
    InitialVisible
    New in version 09
    InitialVisible
    InitialVisible
    ..InitialVisible is used to find out whether:
    • a control was visible during the first display of associated window or page.
    • a window was visible during its first display.
    Versions 09 and later
    Name
    New in version 09
    Name
    Name
    ..Name is used to find out:
    • the name of the font associated with a Font variable.
    • the name of a control, report or report block.
    • the name of a control, group of controls or window.
    • the name of a control, group of controls or page.
    Versions 09 and later
    Type
    New in version 09
    Type
    Type
    ..Type is used to find out:
    • the type of element described by programming (file or item description) or not (file or item defined in the data model editor, view or query).
    • the type of object.
    • the type of value stored in a variant.
    Versions 09 and later
    Visible
    New in version 09
    Visible
    Visible
    ..Visible is used to:
    • Find out whether an element is visible.
    • Make an element visible or invisible.
Minimum required version
  • Version 10
This page is also available for…
Comments
Click [Add] to post a comment